8742/GWL/E8 SPECIAL REPAIR TO BLDG No. P-145/1 TO 04 AND PROVN OF EXTERNAL TOILET / BATHROOM INCL CERTAIN MINOR WORKS IN THE AREA OF AGE B/R-II UNDER GE GWALIOR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but n. exc 3.00 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 105x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items .

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 125x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items .

M&L for PCC 1:3:6 type C0 (12.5mm stone agrregate) for filling in pressed steel frames and like complete all as specified and directed

M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.

Reinforced cement concrete (normal mix) (20mm graded aggregates) as in shelves etc complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc. complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, coumnns in floor , roof , landing complete all as specified and directed.

M&L for use and waste formwork to sides of concrete foundation , footing, base of coulmn , raft, raft beam sides and soffits of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

M&L use and waste formwork for to sides of pillar ,post ,struts ,pier column rough finished surfaces of concrete rough finished surfaces of concrete complete all as specified and directed

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed .

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars ,6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for Moorum red bajri filling in floor or paving laid in layers n. exc. 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as spd and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors,finish rough to receive th\e floor finishes etc

M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed.

M&L for machine cut Kota stone slab 18mm to 20 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.

M&L for machine cut kota stone slab 18mm -20 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300mmx300mmx7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M&L for Brick work with Fly Ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M& L for Brick work with fly Ash bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperatly under appropiate item of schedule 'A'

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI marked.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on WALL surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applyintwo coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall all as direced by Engr-in-Charge.

M & L two coat of oil emulsion distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces etc.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and directed.by Engr-in-Charge

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and directed.by Engr-in-Charge

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

M & L for factory made 35 mm 2nd class Hard Wood, plain framed factory made panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and directed.

M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed.

S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified .

S & F Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc.

S&F MS Sliding door bolts Rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 250mm size complete.

S&F Aluminium butt hinges of 100mm size type C-22 complete.

S&F MS 150 mm ordinary rat tail springs plate type incl.rollar plate etc.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S & F factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays , complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays , complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F factory made steel vetilator with top hung glazed shutters, including projecting type hinges, with steel handles and steel peg stays , complete with glazing bars, Complete all as specified and directed

S&F factory made steel ventilator with top hung glazed ventilator including projecting type hinges with steel handle and steel peg stay complete witout glazing bar , dovetailed or welded complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter, complete all as specified and directed.

S&F 3mm thick pin headed figured sheet glass quality in square n exc 0.5 sqm each pane in new glazed shutter, complete all as specified and directed.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 E-165 complete all as specified and directed.

M&L painting to steel surface exc 10 cm width or girth with two coats of synthetic enamelled paint over a coat of red oxide including prepration of newly or previously untreated surface complete all as specified.

S&F tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete.

S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by engineer in charge.

S&F for of vitreous china wash basin, white, oval type, (size as approved by Engineer In charge) Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.

M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.

S&F Vitreous China Urinals, half stall type white (excluding fjushing cistern, flush pipe and waste pipe complete including providing & fixing ;lugs bedding urinal against wall in cm 1:2 securing urinal to plug with bran screw all as specified and directed.

S&F for viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down existing tarfelt from roof and removing from site all as directed.

M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and Smooth mixed with water proofing compond complete all as speceified and as directed by engineer- in charge . Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric land on primed surface by torch application (c) third two coat of aluminium bituminous paint ( 200ml/sqm i.e 100 ml/sqm in each coat) over polymetric membrane complete all as specified and as directed.

M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.4 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed by engineer in charge.

M & L for cutting grooves in brick wall/ RCC, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete.

M&L, precast cement concrete tiles of size 250mm x 250mm x 20 mm as in foor top ,confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & plished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE etc complete all as specified and as directed.

Supply only Liquid water proofing compound complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft / loose soil soil complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance exceeding 500 metre but n. exc 1.50 Km and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded poly-ethylene three layes insunation puff water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded poly-ethylene three layes insunation puff water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe.

supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

S & F 15mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling, concealed or fixed to wall or laid in floors complete all as specified and as directed

S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified

S&F PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S&F for 15mm angle cock chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified.

S&F Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions and fixed in repair, complete all as specified and directed.

S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed

S&F for in repairs 15mm angle cock ISI Mark chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified.

S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

S&F for 15mm ,bib tap ISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified.

S&F for in repairs15mm,pillar taps ISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified .

S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed.

M&L vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete.

S&F of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete.

S&F Soap dish of CP fixed with pvc rawl plugs and screw complete.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent /adehesive complete all as specified .

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings, heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F PVC (SWR) pipes, 75 mm bore, single sockets, in any length with rubber ring joints laid in floors or wall complete all as specified and directed.

S&F PVC (SWR) pipes, 110 mm bore, single sockets, in any length with rubber ring joints laid in floors or wall complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore, any radius complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radiuscomplete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S&F PVC access door of 110 / 75 mm complete all as specified and directed.

S&F Ball PVC valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

M & L 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge .

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F for gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

S&F for gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40mm graded stone aggregate in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 150mm bore.

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars

M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement (forming fair finished channel shall be measured and paid for separately)

M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone agg) as in cover slabs for man holes and set in CM 1:4 including necessary from work all as specified. Note: Reinforcement and form work shall be measured paid separately)

Cutting holes in brick/stone wall ,depth of embedment portion of hold fast exc half brick wall but not exc one brick wall, built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed

S & F in repair for plate rack made out of stainless steel of wire type / sheet pattern size nad type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm built size 410mmx330x160mm complete.

S&F Machine pressed precast Coloured concrete Tile ( Rubber mould casted ) size 300x300mm of 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed (Glosy finish).

M&L for 15 mm thick dubbing coat in Cement Mortar (1:4) on ceiling surface complete all as specified and directed.

S & F Small fittins such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals Not exc 200 cum each of II nd class HW complete.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor .

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as directed by Engineer -in -charge.

M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as directed by Engineer -in -charge.

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as directed by Engineer -in -charge.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to Fe 290 (Gde E-165) complete all as directed by Engineer -in -charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as directed by Engineer -in -charge.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces.

Soakage well excavation in any type of soil Foundation PCC 1:3:6 Walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM RCC cover slab in M25/ SFRC Cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2MX 4.5M Effective Depth complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 40 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia complete all as specified and directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 40 mm dia complete all as directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as directed.

M&L for Construction of valve chambers with 150 mm thick PCC foundation 1:4:8 type D2 using 40 mm graded trap stone aggregate, 230 mm thick brick masonary wall with sub class 'B' bricks builts in cement mortar 1:4 10 mm thick plastering to brick masonary in cement mortar internally and externally upto 15 cm below ground level, 50 mm thick coping with PCC 1:2:4 type B1 using 20 mm graded crushed trap stone aggregate valve chamber frame cover made of mild steel angles of size 40mm x 40mm x 6mm and cover made of 2.5 mm thick mild steel sheet fixed with mild steel hinges - 02 Nos, locking arrangements with provision of locks and painting the steel surfaces with two coats of synthetic enameled paint over a coat of zinc chromate primer including neccessary earth work, excavation, all as specified and directed by Engineer-in-Charge of size 1.0 x1.0 x1.0 internal dimentions.

Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 40 mm dia from bore of pipe existing CI pipe.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and rehanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete:-

One light point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps controlled with one switch on the same board.

One 3 pin socket outlet 5 Amp controlled by one switch on independent board.

One Ceiling fan point controlled by one switch.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One light point controlled by 2- two way switch

Point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F Switch socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete.

S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket outlet multipurpose flush type 2 in 1 6 pin 5/15 amps complete all as specified and directed.

S&F switch piano flush button single pole two way 5 Amp complete all as secified and directed.

S&F bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body.

S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Lamp 09/10 watt complete.

S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked incl LED Bulb 09/10 watt complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix BEE 5 star rating energy efficient ceiling fans 1200 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed.

S&F Exhaust fan steel body double bearingr AC single phase, 230V of size 300 mm sweep with bl;ades, and frame and Louvers, energy saving including cutting of wall all as specified and directed by Engr - in - Charge.

Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

Supply, install, commissioning and installation of distribution meter box indore type, factory madeout of CRCA sheet 2mm thick complete with inside, outside owder costed independent housing for meter with transperent glass & rubber gasket acking with suitable size copper single / two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbae ( for out going) duly installed ( including self insulayed) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement comprising for following fittings including taking down existing MCB Db TN 4 ways:- (i) MCCB TN 63 Amps, 16 KA - 01 no ( For Incomimg) (ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts) -01 No (iv) Indicator Lam Set of three R, Y, B -01 Set (v) ASS & VSS with CTs-02 Nos (vi) MCB SP 40 Amps, 230 volts -04 Nos ( for outhoing) (vii) nutral bus bar link mounted on insulator (viii) place for fixing the enery meter -04 Nos (ix) the quoted rate is inclusive of removing the existing electric meter from the building and the refixing the same in the sheet metal enclosure at the same location without any damage to the meter. Make of accessories L&T/ Achneider/ C7S Note:- (i) cable entry gland made of poly carbonate of appropiate size shall be provided in each cable/ wire entry as per IS standard (ii) All internal wiring inside the panel used for metering upose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5sqmm

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm 4 Core.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed.

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole & Including MCCB 63 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 10 Sqmm 4 Core.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Supply and Fixing galvanised steel water tubing of meadium grade with provision of flanges as per site requirment of 80 mm (3") dia including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed complete to walls and ceilings or laid in trench/ floors including dismantling existing steel tubing and connections fixed at any location and credit to contract all as directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of Schedule A (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe.

Supply, install, testing and commissioning complete Centrifugal Mono block pump set coupled with electrical opretaed Motors 440 volts, 50 Hz required head not less than 43 mtrs, suction/delivery 80mm x 65 mm dia, with discharge capacity not less than 13.5 LPS, (10 HP) including fixed on suitable size MS angle placed on PCC foundation and grouting with suitable size/Nos Nut bolts & all electrical connections, all as required at site complete and directed by engineer in charge. Note:- (i) Quoated rates are includes, PCC foundation work, Nut bolts, MS chanel work, all elctrical connections and suitable size of Copper/aluminium cable (if required on site) not more than 10 RM complete. (ii) Quoated rates are includes dismantling of Existing Centrifugal Mono Block pump Nos -02 including fitting to deposited in E/M Store Yard.

Supply, laying, jointing and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core in replacement of existing electric cable of any size all as specified and directed.

Boring of holes under road, pavement, hard standing by manualy with necessary machine including HDPE/ GI pipe of 100 mm dia all as specified and directed.

Material & Labour for CI non return valve (NRV) conforming to IS 5312, ISI marked with GM flap of size 80 mm and connected with necessary bolts, nuts & washers, gaskets etc complete including dismantling of old unserviceable existing gate valve and credit to contract all as directed.

Supply and fix cast iron sluice valve PN 1:6 conforming to IS 1484/2000, ISI mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unserviceable gate valve fixed at any location of size 65 mm dia and credit to contract, all as directed.

M&L Heating kits indoor/outdoor type for LT cable of size 70 sqmm, XLPE armoured cable 3.5 core.

M&L for construction of header made out of MS pipe of 300 mm dia, 2.5 meter length, providing holes for fixing/welding MS pipe pieces with one flanged end for fixing of non return valve of 80 mm dia 02 Nos and One (01) No sluice valve 80 mm dia. MS pipe should be fixed on PCC in foundation and top 1:3:6 type C-1 using 20 mm graded trap stone aggregate (20 cm in foundation and 20 cm on top) and masonary block constructed with 230 mm thick bricks, sub class 'B' bricks built in cement massonary block constructed with 230 mm thick bricks, sub class 'B' bricks built in cement mortar 1:4 and 15 mm thick plastering to brick massonary in cement mortar of size 2.8x0.7x1 mtr in height (0.55mtr in ground and 0.45mtr up on ground level), including excavation and earth work complete. Note: (i) Quoted Rates are also included to fixing/welding of 03 Nos MS bend and MS pipe cut pieces as required size/type/length on site each for all 03 Nos inlet/outer water supply pipelines connections. (ii) All T&P, materials will be provided by the contractor without any extra cost. (iii) Sluice/ Non return valves\ will be measured and paid separately under appropriated items of schedule.

Supply and fix strainer for suction of 100 mm and other end with flange provision for connected to 80 mm dia GI meadium grade pipe.

Shree Jee Associates

M.S. ENGINEERS

Akarsha Enterprises

M/S MAHAVIR SINGH

Babatia super works