Special repair to internal road at 127 the mall under GE East

Amount

Material and labour for repair to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges, atleast 25mm in any depth, making good by applying tack coat using paving bitumen @ 5kg per 10sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8kg per 10sqm blinded with 0.09 cum stone chipping 6.3mm size again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and directed.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with paving bitumen any penetration @ 4% by weight of total mix, rolling to uniform smooth surface with 8 to 10 tonne power road roller complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with air compressor/gunny bags to remove all loose dirt etc and applying evenly a priming.tack coat with paving bitumen @ 5kg per 10sqm of road surface and laying 30mm thick bituminous premixed asphaltic semi dense concrete with 5.5% binder content by weight of total mix with mechanical paver, rolled and compacted to required camber and gradient, with 8 to 10 tonne power roller to achieve a uniform smooth surface with pneumatic roller complete all as specified.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

SATISH AGGARWAL AND CO (BID ID -3106469)

J.K & Company (BID ID -3124140)

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3109834)

M/s Sahib and Company (BID ID -3124203)