Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.9 L
EMD Value
₹49,760
Closing Date
21 Jan 2025, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
CONSTRUCTION OF STORE FOR CEMENT, LIME, BLEACHING AND FERROUS SULPHATE INSIDE ENGINE DIVISION
10040
e-TN NO-W-22/24-25
Works
Mig Complex- Engine Divn-Koraput-Civil
₹0
₹49,760
21 Jan 2025
23 Sept 2024
23 Sept 2024
21 Jan 2025
LIST OF WORK IN PROGRESS FOR THE WORK CONSTRUCTION OF ELECTRICAL SUB STATION INSIDE ENGINE DIVISION.
Line No. KPTCC/W/404
NAME OF THE CONTRACTOR
Sl. No. Name of Work Total/W.O Value in Rs. Executed/Completed Value Rs. Balance Rs. Date of Commencement Date of Completion
HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL
Name of the Work CONSTRUCTION OF ELECTRICAL SUB STATION INSIDE ENGINE DIVISION.
Line No KPTCC/W/404
Name of the Contractor
Check list and acceptance for submission of documents with tender
Sl No. Documents Checking by Contractor
1 Constitution and Legal Status of Bidder Firm Registration, Power of attorney of signatory of Bid
2 Submission of cost of Tender documents by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value
3 Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value
4 Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender Value
5 Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms
6 Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years. For one works value
For Two works value
For Three works value
7 Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company
8 Submission of Income Tax Return for last 3 financial years. 2020-21
9 Submission of Average Annual financial turnover during the last 5 years 2018-19
10 Balance sheet for the last 5 years
11 Plant and Machinery details of work
12 Proposed work completion Schedule in the form of Bar Chart
13 Work in Hand in the required format
14 Bank Balance Statement for the last three months
15 Overdraft facilities available with the agencies
16 Submission of Copy of PF Registration PF No.
17 Submission of Copy of Labour License
18 Submission of Copy of PAN Card PAN No.
19 Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along
20 NEFT/RTGS Format Duly filled in (Original to be submitted in the office)
21 GST REGISTRATION NO: GST No.
22 Submission of Copy of ESI Registration ESI No.
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
BILL OF QUANTITIES FOR THE WORK OF "CONSTRUCTION OF ELECTRICAL SUB STATION INSIDE ENGINE DIVISION"
LINE NO : KPTCC/W/404
NAME OF THE AGENCY :
Sl. No. Description of work Quantity Unit Rate Amount
ANNEXURE-I (CIVIL WORKS)
1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 627.84 Cum ₹ 218.74 ₹ 137,333.72
2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 201.35 Cum ₹ 1,784.66 ₹ 359,341.29
3 Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 201.35 Cum ₹ 5,724.37 ₹ 1,152,601.90
4(a) Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources grade in foundation, footing etc. excluding of the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level etc. all complete as per direction of Engineer in Charge. 215.56 Cum ₹ 7,601.47 ₹ 1,638,572.87
4(b) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, roof beams, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 33.37 Cum ₹ 9,668.49 ₹ 322,637.51
4(c) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 42.27 Cum ₹ 9,668.49 ₹ 408,687.07
4(d) Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge. 17.96 Cum ₹ 9,120.13 ₹ 163,797.53
4(e) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 6.45 Cum ₹ 9,668.49 ₹ 62,361.76
5 Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding up to and above plinth level etc. all complete as per specification and direction of Engineer In Charge. 37873.20 Kg ₹ 90.63 ₹ 3,432,448.12
6 Centering and shuttering including strutting, propping etc. and removal of form for the same for the following etc. all complete as per direction of Engineer in charge.
a For footing, plinth beam, foundation 723.07 Sqm ₹ 329.54 ₹ 238,280.49
b For Lintels beams, roof beams 171.48 Sqm ₹ 618.82 ₹ 106,115.25
c For roof slab 293.98 Sqm ₹ 779.20 ₹ 229,069.22
d For columns 401.25 Sqm ₹ 807.82 ₹ 324,137.78
7 Supplying, carrying to site all approved materials and providing Brick work with flyash F.P.S. (non modular) bricks of class designation 50 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) etc. all complete as per direction of Engineer in charge. 116.46 Cum ₹ 5,228.82 ₹ 608,948.38
8 Supplying, carrying to site all approved materials and plastering with 6 mm thick concrete surface of mix 1:3 (1 cement: 3 fine sand) etc. all complete as per direction of Engineer in charge. 261.00 Sqm ₹ 252.48 ₹ 65,897.28
9(a) Supplying, carrying to site all approved materials and plastering with 15 mm thick internal cement plaster on rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) etc. all complete as per direction of Engineer in charge. 532.50 Sqm ₹ 321.85 ₹ 171,385.13
9(b) Supplying, carrying to site all approved materials and plastering with 15 mm thick external cement plaster on rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) etc. all complete as per direction of Engineer in charge. 1186.88 Sqm ₹ 321.85 ₹ 381,997.33
10 Finishing walls with Acrylic Smooth exterior paint of required shade on new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 1186.88 Sqm ₹ 134.96 ₹ 160,181.32
11 Two coats of wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour etc. all complete as per specification and direction of Engineer In Charge. 793.50 Sqm ₹ 120.00 ₹ 95,220.00
12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. all complete as per direction of Engineer in charge. 1980.38 Sqm ₹ 131.13 ₹ 259,687.23
13 Two or more coats painting on new work with synthetic enamel paint of approved brand and manufacture to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 478.80 Sqm ₹ 131.01 ₹ 62,727.59
14 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of 1.25mm thickness for rolling shutters with 80x1.25 mm M.S. laths including providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 sqm and up to 16.80 sqm in area etc. all complete as per specification and direction of Engineer In Charge. 70.00 Sqm ₹ 4,146.68 ₹ 290,267.60
15 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift etc. all complete as per specification and direction of Engineer In Charge. 163.32 Cum ₹ 588.66 ₹ 96,139.95
16 Providing and laying in position cement concrete of 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge. 15.22 Cum ₹ 6,538.07 ₹ 99,509.43
17 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate with 20 mm nominal size ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. all complete as per direction of Engineer in charge. 261.00 Sqm ₹ 516.13 ₹ 134,709.93
18 Providing and fixing Powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) etc. all complete as per direction and specification of Engineer In Charge. 263.04 Kg ₹ 446.13 ₹ 117,350.04
19 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 31957.50 Kg ₹ 98.61 ₹ 3,151,329.08
20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using flats 30x6mm for diagonal braces and central cross piece etc. all complete as per specification and direction of Engineer In Charge. 12.50 Sqm ₹ 4,675.42 ₹ 58,442.75
21 Providing & fixing 5.5 mm thick glass panes panes with putty and glazing clips in steel doors, windows, clerestory windows etc. all complete as per specification and direction of Engineer In Charge. 34.80 Sqm ₹ 1,168.19 ₹ 40,653.01
22 Grading roof for water proofing treatment with cement mortar 1:3 (1 cement : 3 coarse sand) etc. all complete as per direction of Engineer in charge. 7.093 Cum ₹ 13,539.58 ₹ 96,036.24
23 Disposal of moorum/ building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts etc. all complete as per specification and direction of Engineer In Charge. 22.50 Cum ₹ 415.21 ₹ 9,342.23
24 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift etc. all complete as per specification and direction of Engineer In Charge. 50.40 Cum ₹ 588.66 ₹ 29,668.46
25 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars 75.00 Cum ₹ 2,368.82 ₹ 177,661.50
26 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, fixed to steel windows by welding etc. all complete as per specification and direction of Engineer In Charge. 822.00 Kg ₹ 184.12 ₹ 151,346.64
27 Providing and laying Ceramic Non Skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc. all complete as per direction of Engineer in charge. 9.00 Sqm ₹ 1,105.29 ₹ 9,947.61
28 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 21.60 Sqm ₹ 1,065.50 ₹ 23,014.80
29 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. 2.25 Sqm ₹ 2,734.29 ₹ 6,152.15
30 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge 5.90 Rmt ₹ 414.03 ₹ 2,442.78
31 Providing and fixing IS : 12817 marked 100X58X1.90 mm stainless steel butt hinges with stainless steel screws etc. all complete as per specification and direction of Engineer In Charge. 3.00 Each ₹ 90.00 ₹ 270.00
32 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 10.00 Rmt ₹ 281.51 ₹ 2,815.10
33 Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 10.00 Rmt ₹ 337.44 ₹ 3,374.40
34 Providing and fixing 15 mm nominal bore, 86 mm long, weighing not less than 88 gms PTMT bib cock of approved quality and colour etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 105.55 ₹ 105.55
35 Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 523.03 ₹ 523.03
36 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 131.85 ₹ 131.85
37 Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 2,225.92 ₹ 2,225.92
38 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 1,351.22 ₹ 1,351.22
39 Providing and fixing 15 mm nominal bore, 107 mm long, weighing not less than 110 gms PTMT pillar cock of approved quality and colour etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 175.17 ₹ 175.17
40 Providing and fixing 15 mm nominal bore with 45 cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 102.44 ₹ 102.44
41 Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 1,000.55 ₹ 1,000.55
42 Providing and fixing 32mm dia. Semi rigid P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings etc. all complete as per specification and direction of Engineer In Charge. 1.00 Each ₹ 87.31 ₹ 87.31
Sub Total Works Amount (Annexure-I) ₹ 14,921,523.03
ANNEXURE-II (Electrical works)
1 Supply & Fixing of 25 mm medium Class PVC conduit along with accessories in surface/recess and making good the same in case of recessed conduit as required. 360.00 Mtr ₹ 129.46 ₹ 46,605.60
2 Wiring for conduit/submain wiring along with earthwire with following sizes FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required with supply of material. Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd
a 2*1.5 Sqmm+1*1.5 Sqmm earth wire 1358.00 Mtr ₹ 291.96 ₹ 396,481.68
b 2*2.5 Sqmm+1*2.5 Sqmm Earth wire 1140.00 Mtr ₹ 329.46 ₹ 375,584.40
3 Supplying and fixing 8 way(4+24), double door , horizontl tyoe three pole and neutral, sheet steel, MCB distribution board, 415 V, on on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, power painted earthing etc as required. (But without MCB/RCCB/Isolator) Make: Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd 3.00 Nos ₹ 5,327.68 ₹ 15,983.04
4 Supply and fixing 63 amps four pole , 415 V ,Isolator/MCB in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 2.00 Nos ₹ 923.21 ₹ 1,846.42
5 Supply and fixing 32 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Double Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 34.00 Nos ₹ 585.71 ₹ 19,914.14
6 Supply and fixing 16 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Single Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 8.00 Nos ₹ 228.57 ₹ 1,828.56
7 Supply and fixing 12 Module(200 mm*150 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 8.00 Nos ₹ 488.39 ₹ 3,907.12
8 Supply and fixing 6 Module(200 mm*75 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 3.00 Nos ₹ 358.93 ₹ 1,076.79
9 Supply and fixing 8 Module(125 mm*125 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 6.00 Nos ₹ 405.36 ₹ 2,432.16
10 Supply and fixing 4 Module(125 mm*75 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 4.00 Nos ₹ 306.25 ₹ 1,225.00
11 Supplying and fixing of following modular switches/sockets on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: L&T/Havells/Polycab/Legrand/Anchor/GM
a a. 5/6 Amps Switch 90.00 Nos ₹ 91.96 ₹ 8,276.40
b b. 15/16 Amps Switch 6.00 Nos ₹ 139.29 ₹ 835.74
c c.3 pin 5/6 amps socket outlet 18.00 Nos ₹ 108.93 ₹ 1,960.74
d d.6 pin 15/16 amps Socket outlet 6.00 Nos ₹ 175.89 ₹ 1,055.34
12 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make : Havells / Crompton / Orient / Bajaj / Almonard /Atomberg / Usha 4.00 Nos ₹ 2,437.50 ₹ 9,750.00
13 Supply & Fixing Industrial twin LED tubelight fitting including LED Tube(2*18/20 Watt) a. LED Tube Light Power Rating : 18/20 watt b.Corresponding min.Luminous Flux : 1800 Lumen or higher. C.Type of Tube Light : T-8. d.Colour temperature (K) : ≥ 6500K (Cool White). e.Length of LED Tube Light ( Normal) in feet : 4 feet. f.Cap Designation : G-13 Bi-Pin. g. Shell material : Polycarbonate. h.Warranty: 2 Years Make:BAJAJ/CROMPTON/ C&S ELECTRIC/HAVELLS/JAQUAR LIGHTING/ORIENT ELECTRIC/PHILIPS/SURYA/WIPRO 42.00 Nos ₹ 945.00 ₹ 39,690.00
14 Supply of 4C x 16 sqmm, 1.1 KV grade, XLPE insulated Armoured Aluminium Conductor Cable as per IS :7098(Part-I) with latest ammendments.Make : Polycab /KEI/V-Guard/RR Kabel/Crystal. 450.00 Mtr ₹ 234.00 ₹ 105,300.00
15 Laying of 1no of PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of 16 Sqmm cable direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. 450.00 Mtr ₹ 33.04 ₹ 14,868.00
16 Supply and making of end termination with brass compression gland and aluminium lugs for 16 sqmm PVC insulated XLPE aluminium conductor of 1.1 KV grade as reqd. 6.00 Nos ₹ 275.89 ₹ 1,655.34
17 Supply and fixing of Exhaust Fan 300 mm size of Capacitor type,2.5 mfd,440 V,50Hz AC, Insulation Class B & Copper winding, 220-240 volts, 50 Hz AC Single Phase, Rated Air Delivery 1600-1700 m3/hr. of Make: Bajaj, Crompton, Usha, Havells, V guard 10.00 Nos ₹ 2,690.00 ₹ 26,900.00
18 Supply of 200 watt LED Focus lights with mounting Handle,LED efficacy > =100 lumen/watt,Color Rendering Index(CRI):70 or above,Ingress Protection:IP66 or better,Housing Material:High Pressure Die cast aluminium,Operating Voltage:Single phase 140 to 270 VAC,Frequency:50 Hz+/-3%.Warranty: 2 years minimum.Make:Havells/Crompton/Surya/Bajaj/Polycab 6.00 Nos ₹ 3,150.00 ₹ 18,900.00
19 Fixing of 200 watt LED focus lights on pole arm including wiring/cable laying from DB mounted on pole,supply connection and trial testing. 6.00 Nos ₹ 305.00 ₹ 1,830.00
20 Earthing with GI pipe 4.5 meters long,40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal/ Coke and salt as required confirming to IS 3043 8.00 Nos ₹ 6,120.54 ₹ 48,964.32
21 Providing and fixing25mm *5mm G.I Strip on surface or in recess for connctions etc.as required. 80.00 Mtr ₹ 217.86 ₹ 17,428.80
Sub Total Works Amount (Annexure-II) ₹ 1,164,299.59
Sub Total Works Amount (Annexure-I+II) ₹ 16,085,822.62
I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00
Sub Total Works Amount ₹ 16,085,822.62
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 2,895,448.07
GRAND TOTAL ₹ 18,981,270.69
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
A Registration, HSN / SAC Code & GST Rate
1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
B Invoicing & Payment
6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
C Input Tax Credit
8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
D Penalty for Non-compliance of GST Act
12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
E Anti-profiteering Measure .
13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
F Other Provision
14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
G Allottment of quarters
15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
BILL OF QUANTITIES FOR THE WORK OF:- "CONSTRUCTION OF STORE FOR CEMENT, LIME, BLEACHING AND FERROUS SULPHATE INSIDE ENGINE DIVISION."
LINE NO : KPTCC/W/397
NAME OF THE AGENCY :
Sl. No. Description of work Quantity Unit Rate Amount
Annexure-A (Civil Works)
1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m etc. all complete as per direction of Engineer in Charge. 84.79 Cum ₹ 218.74 ₹ 18,546.96
2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction of Engineer in Charge. 20.39 Cum ₹ 1,784.66 ₹ 36,389.22
3 Supplying, carrying to site all approved materials and providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per direction of Engineer in Charge. 22.65 Cum ₹ 5,724.37 ₹ 129,656.98
4 (a) Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources grade in foundation, footing etc. excluding of the cost of centering, shuttering, finishing and reinforcement - All work (footing, foundation) up to plinth level etc. all complete as per direction of Engineer in Charge. 22.56 Cum ₹ 7,601.47 ₹ 171,489.16
4(b) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels beams, roof beams bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 6.95 Cum ₹ 9,668.49 ₹ 67,196.01
4 (c) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 11.00 Cum ₹ 9,668.49 ₹ 106,353.39
4(d) Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge. 3.31 Cum ₹ 9,120.13 ₹ 30,187.63
4 (e) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 0.73 Cum ₹ 9,668.49 ₹ 7,058.00
5 Supplying carrying to site all approved materials and placing in position steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding etc. all complete as per direction of Engineer in charge. 5123.25 Kg ₹ 90.63 ₹ 464,320.15
6 Centering and shuttering including strutting, propping etc. and removal of form for the same for the following etc. all complete as per direction of Engineer in charge.
a For footing, plinth beam, foundation 66.14 Sqm ₹ 329.54 ₹ 21,795.78
b for lintel beam, roof beams 104.37 Sqm ₹ 618.82 ₹ 64,586.24
c For roof slab 87.45 Sqm ₹ 779.20 ₹ 68,141.04
d For column 50.88 Sqm ₹ 807.82 ₹ 41,101.88
e For Chajja 16.57 Sqm ₹ 618.82 ₹ 10,253.85
7 Supplying, carrying to site all approved materials and providing Brick work with clay flyash F.P.S. (non modular) bricks of class designation 50 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) etc. all complete as per direction of Engineer in charge. 32.61 Cum ₹ 5,228.82 ₹ 170,511.82
8(a) Supplying, carrying to site all approved materials and plastering with 15 mm thick internal cement plaster on rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) etc. all complete as per direction of Engineer in charge. 208.94 Sqm ₹ 321.85 ₹ 67,247.34
8(b) Supplying, carrying to site all approved materials and plastering with 15 mm thick external cement plaster on rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) etc. all complete as per direction of Engineer in charge. 205.53 Sqm ₹ 321.85 ₹ 66,149.83
9 Finishing walls with Acrylic Smooth exterior paint of required shade new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat with preparation of surface of exterior primer applied @ 0.90 litre/10 sqm) etc. all complete as per direction of Engineer in charge. 205.53 Sqm ₹ 134.96 ₹ 27,738.33
10 Two coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre over a coat of primer having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats of paint wherever required to achieve even shade and colour etc. all complete as per direction of Engineer in charge. 278.94 Sqm ₹ 182.14 ₹ 50,806.13
11 Painting with two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade with preparation of surface over all surface etc. all complete as per direction of Engineer in charge. 50.00 Sqm ₹ 131.01 ₹ 6,550.50
12 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using M.S. angels 40x40x6 mm for diagonal braces etc. all complete as per specification and direction of Engineer In Charge. 12.50 Sqm ₹ 4,877.61 ₹ 60,970.13
13 Providing and laying 40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate with 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. all complete as per direction of Engineer in charge. 70.45 Sqm ₹ 516.13 ₹ 36,361.36
14 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc. all complete as per direction of Engineer in charge. 21.20 Cum ₹ 164.71 ₹ 3,491.85
15 Providing and laying in position cement concrete of 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge. 2.17 Cum ₹ 6,538.07 ₹ 14,187.61
16 Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) etc. all complete as per direction of Engineer in charge. 2.20 Cum ₹ 13,539.58 ₹ 29,787.08
17 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, etc. all complete as per direction of Engineer in charge. 45.00 Cum ₹ 415.21 ₹ 18,684.45
18 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift etc. all complete as per direction of Engineer in charge. 45.00 Cum ₹ 588.66 ₹ 26,489.70
19 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works etc. as required etc. complete for all lift etc. all complete as per direction of Engineer in charge. 180.00 Kg ₹ 145.04 ₹ 26,107.20
20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer for fixed to steel windows by welding etc. all complete as per direction of Engineer in charge. 180.00 Kg ₹ 185.68 ₹ 33,422.40
21 Hire charges for Hydraulic excavator (3D) with driver and fuel etc. all complete as per direction of Engineer in charge. 8.00 day ₹ 6,596.64 ₹ 52,773.12
29 Hire charges for tractor for disposal of debris etc. all complete as per direction of Engineer in charge. 8.00 day ₹ 1,134.45 ₹ 9,075.60
Sub Total Works Amount (Annexure-A) ₹ 1,937,430.74
Annexure-B (Electrical Works)
1 Supply & Fixing of 25 mm medium Class PVC conduit along with accessories in surface/recess and making good the same in case of recessed conduit as required. 140.00 Mtr ₹ 129.46 ₹ 18,124.40
2 Wiring for conduit/submain wiring along with earthwire with following sizes FRLS PVC insulated copper conductor single core cable in surface/recessed m,edium class PVC conduit as required with supply of material. Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd
a) 2x1.5 Sqmm+1x1.5 Sqmm earth wire 135.00 Mtr ₹ 291.96 ₹ 39,414.60
b) 2x2.5 Sqmm+1x2.5 Sqmm Earth wire 90.00 Mtr ₹ 329.46 ₹ 29,651.40
3 Supply and fixing of 4 way(4+12) , double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volt, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, power painted earthing etc as required Make: Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd 1.00 No ₹ 3,652.68 ₹ 3,652.68
4 Supply and fixing 63 amps four pole , 415 V ,Isolator/MCB in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 1.00 No ₹ 923.21 ₹ 923.21
5 Supply and fixing 32 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Double Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 2.00 Nos ₹ 585.71 ₹ 1,171.42
6 Supply and fixing 16 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Single Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 4.00 Nos ₹ 228.57 ₹ 914.28
7 Supply and fixing 12 Module(200 mm x 150 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 4.00 Nos ₹ 488.39 ₹ 1,953.56
8 Supply and fixing 6 Module(200 mm x 75 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 1.00 No ₹ 358.93 ₹ 358.93
9 Supplying and fixing of following modular switches/sockets on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: L&T/Havells/Polycab/Legrand/Anchor/GM
c.3 pin 5/6 amps socket outlet 9.00 Nos ₹ 108.93 ₹ 980.37
d.6 pin 15/16 amps Socket outlet 3.00 Nos ₹ 175.89 ₹ 527.67
10 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make : Havells / Crompton / Orient / Bajaj / Almonard /Atomberg / Usha 2.00 Nos ₹ 2,437.50 ₹ 4,875.00
11 Supply and fixing of LED Luminaire (Recessed),Rated Wattage:30-36 Watt,Color Temperature:6000 (+/- 500) Deg K,Type of Fixture:2 X 2 feet square,Diffuser Material:Acrylic,LED Chip Efficacy:(>=130 LM/Watt) for 6000 deg K,Operating voltage & frequency range:140V to 280 V at 50 Hz with build in PIR occupancy sensor AC,Make:Havells/Crompton/Philips/C&S/Bajaj/Wipro/Surya 4.00 Nos ₹ 3,690.00 ₹ 14,760.00
12 Supply & Fixing Industrial twin LED tubelight fitting including LED Tube(2*18/20 Watt) a. LED Tube Light Power Rating : 18/20 watt b.Corresponding min.Luminous Flux : 1800 Lumen or higher. C.Type of Tube Light : T-8. d.Colour temperature (K) : ≥ 6500K (Cool White). e.Length of LED Tube Light ( Normal) in feet : 4 feet. f.Cap Designation : G-13 Bi-Pin. g. Shell material : Polycarbonate. h.Warranty: 2 Years Make:BAJAJ/CROMPTON/ C&S ELECTRIC/HAVELLS/JAQUAR LIGHTING/ORIENT ELECTRIC/PHILIPS/SURYA/WIPRO 8.00 Nos ₹ 945.00 ₹ 7,560.00
13 Supply and fixing 200 watt LED flood light a. LED Rating (in Watts)/System-200 watt. B. Working life for LED (as per LM-80 and LM 21 reports)-50000Hrs c.LED efficacy>=100 Lumen/watt. D.CRI: 70 or above e. IP Protection: IP66. f.Housing material:High preasure die cast aluminium g. Operating Voltage: 140-270 V AC h. Warranty: 2 Years. Make:BAJAJ/CROMPTON/ C&S ELECTRIC/HAVELLS/JAQUAR LIGHTING/ORIENT ELECTRIC/PHILIPS/SURYA/WIPRO 2.00 Nos ₹ 6,300.00 ₹ 12,600.00
14 Laying of 1no of PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of 25 Sqmm cable direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. 70.00 Mtr ₹ 345.54 ₹ 24,187.80
15 Supply and making of end termination with brass compression gland and aluminium lugs for 25 sqmm PVC insulated XLPE aluminium conductor of 1.1 KV grade as reqd. 2.00 Nos ₹ 279.46 ₹ 558.92
16 Earthing with GI pipe 4.5 meters long,40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal/ Coke and salt as required confirming to IS 3043 1.00 No ₹ 6,120.54 ₹ 6,120.54
17 Providing and fixing 6 SWG wire in recess for loop earthing along with existing surface/recess conduit/sub main wiring/cable as required. 10.00 Mtr ₹ 37.50 ₹ 375.00
Sub Total Works Amount (Annexure-B) ₹ 170,966.85
Total ( Annexure-A + Annexure-B) ₹ 2,108,397.59
I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00
Sub Total Works Amount ₹ 2,108,397.59
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 379,511.57
GRAND TOTAL ₹ 2,487,909.16
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
A Registration, HSN / SAC Code & GST Rate
1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
B Invoicing & Payment
6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
C Input Tax Credit
8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
D Penalty for Non-compliance of GST Act
12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
E Anti-profiteering Measure .
13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
F Other Provision
14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
G Allottment of quarters
15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
BILL OF QUANTITIES FOR THE WORK OF:- "CONSTRUCTION OF WEIGH BRIDGE CONTROL ROOM AND ENCLOUSER FOR CAT A NON MOVING RAW MATERIALS IN HAL ENGINE DIVISION ."
LINE NO : KPTCC/W/399
NAME OF THE AGENCY :
Sl. No. Description of work Quantity Unit Rate Amount
Annexure-A (Civil Works)
1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 47.23 Cum ₹ 218.74 ₹ 10,331.09
2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 8.60 Cum ₹ 1,784.66 ₹ 15,348.08
3 Supplying, carrying to site all approved materials and providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per direction of Engineer in Charge. 8.60 Cum ₹ 5,724.37 ₹ 49,229.58
4 (a) Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources grade in foundation, footing etc. excluding of the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level etc. all complete as per direction of Engineer in Charge. 8.24 Cum ₹ 7,601.47 ₹ 62,636.11
4(b) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, roof beams, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 3.77 Cum ₹ 9,668.49 ₹ 36,450.21
4 (c) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 3.52 Cum ₹ 9,668.49 ₹ 34,033.08
4(d) Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge. 2.70 Cum ₹ 9,120.13 ₹ 24,624.35
4 (e) Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 0.99 Cum ₹ 9,668.49 ₹ 9,571.81
5 Supplying carrying to site all approved materials and placing in position steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding up to and above plinth level etc. all complete as per direction of Engineer in charge. 2306.40 Kg ₹ 90.63 ₹ 209,029.03
6 Centering and shuttering including strutting, propping etc. and removal of form for the same for the following etc. all complete as per direction of Engineer in charge.
a For footing, plinth beam, foundation 38.40 Sqm ₹ 329.54 ₹ 12,654.34
b For Lintels beams, roof beams 28.56 Sqm ₹ 618.82 ₹ 17,673.50
c For roof slab 30.36 Sqm ₹ 779.20 ₹ 23,656.51
d For columns 36.00 Sqm ₹ 807.82 ₹ 29,081.52
7 Supplying, carrying to site all approved materials and providing Brick work with flyash F.P.S. (non modular) bricks of class designation 50 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) etc. all complete as per direction of Engineer in charge. 17.00 Cum ₹ 5,228.82 ₹ 88,889.94
8 Supplying, carrying to site all approved materials and plastering with 6 mm thick cement plaster of mix 1:3 (1 cement: 3 fine sand) etc. all complete as per direction of Engineer in charge. 24.00 Sqm ₹ 252.48 ₹ 6,059.52
9(a) Supplying, carrying to site all approved materials and plastering with 15 mm thick internal cement plaster on rough side of single or half brick wall or concrete surface of mix 1:4 (1 cement: 4 fine sand) over brick / concrete surface etc. all complete as per direction of Engineer in charge. 78.18 Sqm ₹ 335.67 ₹ 26,242.68
9(b) Supplying, carrying to site all approved materials and plastering with 15 mm thick external cement plaster on rough side of single or half brick wall or concrete surface of mix 1:4 (1 cement: 4 fine sand) etc. all complete as per direction of Engineer in charge. 132.80 Sqm ₹ 335.67 ₹ 44,576.98
10 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat with preparation of surface of exterior primer applied @ 0.90 litre/10 sqm) etc. all complete as per direction of Engineer in charge. 132.80 Sqm ₹ 134.96 ₹ 17,922.69
11 Two coats of wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.etc. all complete as per direction of Engineer in charge. 102.18 Sqm ₹ 120.00 ₹ 12,261.60
12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. all complete as per direction of Engineer in charge. 234.98 Sqm ₹ 131.13 ₹ 30,812.93
13 Painting with two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade with preparation of surface over all surface etc. all complete as per direction of Engineer in charge. 99.30 Sqm ₹ 131.01 ₹ 13,009.29
14 Providing and laying double charge vitrified tile polished finish of size 600x600mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc. all complete as per direction of Engineer in charge. 21.75 Sqm ₹ 1,221.55 ₹ 26,568.71
15 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. all complete as per direction of Engineer in charge. 22.90 Sqm ₹ 935.04 ₹ 21,412.42
16 Providing and laying polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent for flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 10.00 Sqm ₹ 3,765.80 ₹ 37,658.00
17 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift etc. all complete as per specification and direction of Engineer In Charge. 17.29 Cum ₹ 588.66 ₹ 10,177.93
18 Providing and laying in position cement concrete of 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge. 6.046 Cum ₹ 6,538.07 ₹ 39,529.17
19 Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) etc. all complete as specified and as directed by the Engineer-in-Charge. 126.00 Kg ₹ 446.13 ₹ 56,212.38
20 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as specified and as directed by the Engineer-in-Charge. 1639.170 Kg ₹ 98.61 ₹ 161,638.55
21 Hard drawn steel wire fabric for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. all complete as specified and as directed by the Engineer-in-Charge. 319.690 Kg ₹ 85.88 ₹ 27,454.98
22 Providing and fixing in position mild steel sheets of 1.00 mm thickness for tank / other etc. all complete as specified and as directed by the Engineer-in-Charge. 291.710 Kg ₹ 46.22 ₹ 13,482.84
23 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer etc. all complete as specified and as directed by the Engineer-in-Charge. 16.50 Sqm ₹ 9,613.11 ₹ 158,616.32
24 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using flats 30x6mm for diagonal braces and central cross piece etc. all complete as per specification and direction of Engineer In Charge. 2.50 Sqm ₹ 4,675.42 ₹ 11,688.55
25 Providing & fixing 5.5 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with etc. all complete as per direction of Engineer in charge. 15.75 Sqm ₹ 1,168.19 ₹ 18,398.99
26 Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) etc. all complete as per direction of Engineer in charge. 0.704 Cum ₹ 13,539.58 ₹ 9,531.86
27 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift etc. all complete as per direction of Engineer in charge. 22.50 Cum ₹ 588.66 ₹ 13,244.85
28 Supplying, Carrying to site all approved materials and providing, fixing anchor fasteners (size 10mm diax100mm long) on R.C.C/C.C/Brick Masonary surface including drilling necessary holes and cost of anchor etc all complete as per specifications and directions of Engineer-in-charge. 24.00 Each ₹ 109.24 ₹ 2,621.76
29 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer for fixed to steel windows by welding etc. all complete as per direction of Engineer in charge. 393.75 Kg ₹ 184.12 ₹ 72,497.25
Sub Total Works Amount (Annexure-A) ₹ 1,458,430.93
Annexure-B (Electrical Works)
1 Supply & Fixing of 25 mm medium Class PVC conduit along with accessories in surface/recess and making good the same in case of recessed conduit as required. 100.00 Mtr ₹ 129.46 ₹ 12,946.00
2 Wiring for conduit/submain wiring along with earthwire with following sizes FRLS PVC insulated copper conductor single core cable in surface/recessed m,edium class PVC conduit as required with supply of material. Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd
a) 2 x 1.5 Sqmm+1x 1.5 Sqmm earth wire 100.00 Mtr ₹ 291.96 ₹ 29,196.00
b) 2 x 2.5 Sqmm+1 x 2.5 Sqmm Earth wire 110.00 Mtr ₹ 329.46 ₹ 36,240.60
3 Supply and fixing of 4 way(4+12) , double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volt, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, power painted earthing etc as required Make: Make: L&T/Finolex/Polycab/Havells/Anchor/V-Gaurd 1.00 Nos ₹ 3,652.68 ₹ 3,652.68
4 Supply and fixing 63 amps four pole , 415 V ,Isolator/MCB in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 1.00 Nos ₹ 923.21 ₹ 923.21
5 Supply and fixing 32 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Double Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 4.00 Nos ₹ 585.71 ₹ 2,342.84
6 Supply and fixing 16 amps, 24V/415V, 10 KA, C Curve MCB suitable for inductive Load of Single Pole in the existing MCB DB complete with connections, testing and comissioning etc as required. Make: L&T/Havells/Siemens/Legrand/Schneider/Anchor 6.00 Nos ₹ 228.57 ₹ 1,371.42
7 Supply and fixing 12 Module(200 mmx150 mm), GI Box along with modular base with cover plate for modular switches in recess etc as required. 6.00 Nos ₹ 488.39 ₹ 2,930.34
8 Supplying and fixing of following modular switches/sockets on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: L&T/Havells/Polycab/Legrand/Anchor/GM
c.3 pin 5/6 amps socket outlet 18.00 Nos ₹ 108.93 ₹ 1,960.74
d.6 pin 15/16 amps Socket outlet 4.00 Nos ₹ 175.89 ₹ 703.56
9 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make : Havells / Crompton / Orient / Bajaj / Almonard /Atomberg / Usha 4.00 Nos ₹ 2,437.50 ₹ 9,750.00
10 Supply and fixing of LED Luminaire (Recessed),Rated Wattage:30-36 Watt,Color Temperature:6000 (+/- 500) Deg K,Type of Fixture:2 X 2 feet square,Diffuser Material:Acrylic,LED Chip Efficacy:(>=130 LM/Watt) for 6000 deg K,Operating voltage & frequency range:140V to 280 V at 50 Hz with build in PIR occupancy sensor AC,Make:Havells/Crompton/Philips/C&S/Bajaj/Wipro/Surya 8.00 Nos ₹ 3,690.00 ₹ 29,520.00
11 Laying of 1no of PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of 25 Sqmm cable direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. 50.00 Mtrs ₹ 345.54 ₹ 17,277.00
12 Supply and making of end termination with brass compression gland and aluminium lugs for 25 sqmm PVC insulated XLPE aluminium conductor of 1.1 KV grade as reqd. 2.00 Nos ₹ 279.46 ₹ 558.92
13 Earthing with GI pipe 4.5 meters long,40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal/ Coke and salt as required confirming to IS 3043 1.00 No ₹ 6,120.54 ₹ 6,120.54
14 Providing and fixing 6 SWG wire in recess for loop earthing along with existing surface/recess conduit/sub main wiring/cable as required. 30.00 Mtrs ₹ 37.50 ₹ 1,125.00
Sub Total Works Amount (Annexure-B) ₹ 159,750.89
Total ( Annexure-A + Annexure-B) ₹ 1,618,181.82
I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00
Sub Total Works Amount ₹ 1,618,181.82
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 291,272.73
GRAND TOTAL ₹ 1,909,454.55
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
A Registration, HSN / SAC Code & GST Rate
1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
B Invoicing & Payment
6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
C Input Tax Credit
8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
D Penalty for Non-compliance of GST Act
12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
E Anti-profiteering Measure .
13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
F Other Provision
14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
G Allottment of quarters
15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
BILL OF QUANTITIES FOR THE WORK OF:- "CONSTRUCTION OF PARKING SHED AT TYPE-VI-B BUNGALOW."
LINE NO : KPTCC/W/409
NAME OF THE AGENCY :
Sl. No. Description of work Quantity Unit Rate Amount
1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 17.90 Cum ₹ 218.74 ₹ 3,915.45
2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc. all complete as per specification and direction of Engineer In Charge. 10.39 Cum ₹ 164.71 ₹ 1,711.34
3 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 1.78 Cum ₹ 1,784.66 ₹ 3,176.69
4 Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 1.78 Cum ₹ 5,724.37 ₹ 10,189.38
5 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work for M25 grade with minimum cement content of 330 kg /cum, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
a All works upto plinth level 6.78 Cum ₹ 7,987.18 ₹ 54,153.08
b All works above plinth level upto floor V level 0.28 Cum ₹ 8,286.05 ₹ 2,320.09
6 Centering and shuttering including strutting, propping etc. and removal of form for the same etc. all complete as per direction of Engineer in charge.
a For Foundations, footings, bases of columns, etc. for mass concrete 20.88 Sqm ₹ 329.54 ₹ 6,880.80
b For Lintels, beams, plinth beams, girders, bressumers and cantilevers 6.09 Sqm ₹ 618.82 ₹ 3,768.61
7 Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding etc. all complete as per specification and direction of Engineer In Charge. 635.4 Kg ₹ 90.63 ₹ 57,586.30
8 Brick work with non modular fly ash bricks confrming to IS : 12894 class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 coarse sand) etc. all complete as per specification and direction of Engineer In Charge. 4.20 Cum ₹ 7,355.08 ₹ 30,891.34
9 15 mm thick cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) etc. all complete as per specification and direction of Engineer In Charge. 38.37 Sqm ₹ 346.01 ₹ 13,276.40
10 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre over new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour etc. all complete as per specification and direction of Engineer In Charge. 18.27 Sqm ₹ 156.01 ₹ 2,850.30
11 Finishing walls with Acrylic Smooth exterior paint of required shade on .new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 20.10 Sqm ₹ 134.96 ₹ 2,712.70
12 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, fixed to steel windows by welding etc. all complete as per specification and direction of Engineer In Charge. 18.00 Kg ₹ 184.12 ₹ 3,314.16
13 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 1387.03 Kg ₹ 98.61 ₹ 136,775.03
14 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, hot finished welded type tubes etc. all complete as per specification and direction of Engineer In Charge. 345.96 Kg ₹ 163.36 ₹ 56,516.03
15 Providing and fixing bolts including nuts and washers etc. all complete as per specification and direction of Engineer In Charge. 11.20 Kg ₹ 133.91 ₹ 1,499.79
16 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. all complete as per specification and direction of Engineer In Charge. 72.02 Sqm ₹ 620.71 ₹ 44,703.53
17 Providing and fixing precoated galvanised steel sheet roofing ridges plain (500-600mm) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. all complete as per specification and direction of Engineer In Charge. 5.00 Rmt ₹ 447.35 ₹ 2,236.75
18 Two or more coats painting on new work with synthetic enamel paint of approved brand and manufacture to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 57.36 Sqm ₹ 131.01 ₹ 7,514.73
19 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate with 20 mm nominal size ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 3.60 Sqm ₹ 516.13 ₹ 1,858.07
Sub Total ₹ 447,850.57
I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00
Sub Total Works Amount ₹ 447,850.57
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 80,613.10
GRAND TOTAL ₹ 532,942.18
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
A Registration, HSN / SAC Code & GST Rate
1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
B Invoicing & Payment
6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
C Input Tax Credit
8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
D Penalty for Non-compliance of GST Act
12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
E Anti-profiteering Measure .
13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
F Other Provision
14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
G Allottment of quarters
15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT22.pdf
TENDER_DOCUMENT • 1.64 MB
NEWGCC2023.pdf
TENDER_DOCUMENT • 2.92 MB
AM.pdf
TENDER_DOCUMENT • 5.21 MB
EPS.docx
TENDER_DOCUMENT • 0.01 MB
EPS_2.docx
TENDER_DOCUMENT • 0.01 MB
EPS_3.docx
TENDER_DOCUMENT • 0.01 MB
EPS_4.docx
TENDER_DOCUMENT • 0.01 MB
PERCENTAGBID397.pdf
TENDER_DOCUMENT • 0.10 MB
WIP404.xls
TENDER_DOCUMENT • 0.03 MB
PERCENTAGBID409.pdf
TENDER_DOCUMENT • 0.08 MB
CL404.xls
TENDER_DOCUMENT • 0.06 MB
UNDERTAKING-ED.docx
TENDER_DOCUMENT • 0.02 MB
UNDERTAKING-ED_2.docx
TENDER_DOCUMENT • 0.02 MB
UNDERTAKING-ED_3.docx
TENDER_DOCUMENT • 0.02 MB
UNDERTAKING-ED_4.docx
TENDER_DOCUMENT • 0.02 MB
CBO404.xlsm
TENDER_DOCUMENT • 0.04 MB
CBO397.xlsm
TENDER_DOCUMENT • 0.04 MB
PERCENTAGBID404.pdf
TENDER_DOCUMENT • 0.12 MB
PERCENTAGBID399.pdf
TENDER_DOCUMENT • 0.11 MB
CBO399.xlsm
TENDER_DOCUMENT • 0.04 MB
COB409.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .