Rates for S/I/T/C of AMF Panel, Emergency Distribution Board and Lift at Kisan Mandi Bhawan, Lko

S/I/T/C of cubicle type indoor mounting Powder coated (Siemen's Gray) LT distribution panel/Emergency distribution board with body made up of 16SWG MS-CRC sheet with suitable angle iron, iron strip, etc. All doors will be made up of 16SWG, covered with rubber biding so that they will be completely dust and vermin proof. All instruments fitting screws and nut bolts used will be zinc polished including busbar strip connections. Control section wiring will be done with appropriate wire. Proper lugging in all the connections. Wiring shall be done with appropriate PVC channels, binding strip and cable ties. The panel should have indicating lamps, 3in1 meter, busbar isolators. The panel should have proper depth for maintenance/repair purpose. Incoming: On load changeover: 630Amp 2No. (L&T/Scnieder/ABB/Siemens) Busbar: Aluminium busbar TPN 800Amp. Outgoing: MCCB TPN 400Amp 2No (L&T/Scnieder/ABB/Siemens) MCCB TPN 320Amp 2No. (L&T/Scnieder/ABB/Siemens) MCCB TPN 250Amp 1No. (L&T/Scnieder/ABB/Siemens)

S/F of 12 core flexible copper control cable lead for 250KVA DG set and AMP panel

S/F of 800Amp ACB FP with retro fitting. (L&T/Scnieder/ABB/Siemens)

S/I/T/C of Video Monitoring System (VMS) for 64 camera operating (Honeywell/bosch)

Buy back price of existing/old AMF panel including dismanteling, porper stacking and cartage.

Buy back price of existing/old emergency distribution board (EDB) including dismanteling, porper stacking and cartage.

S/I/T/C of passenger lift with capacity of 13 passengers 884Kg including all accessories and equipments. • Type & Capacity - 13 Passenger, 884Kgs. • Speed- 1.0 Meter Per Second • Type of Drive & Control- A.C. V.3.F. Microprocessor based Control. • Motor / Machine- Gearless with M/C Room • Travel- 28 Meters. (Approx.) • Serving- G + 7 Floor. 04 stops, 04 openings (All on same side) • Hoistway required- “2500 mm wide x 2400 mm deep” • Car size- “2000 mm wide x 1100 mm deep x 2400mm height” • Car Enclosure- Stainless steel Hairline finish. • Car Door- Stainless steel Hairline finish. • Landing Doors- All landing doors Stainless steel Hairline finish. • Car entrance & Hoist way entrance- Center opening doors 900 mm wide 2000 mm high with provision of emergency key opening at all landings. • Door Operation- Automatic Power operating with adjustable door opening & closing timing. • Control- Simplex, full collective control with or without attendants. • Operation- A.C. variable voltage variable frequency • Power Supply- 415 Volts ± 10%, 3 Phase, 50 Hz AC. • Over Head available/Required- 4800 mm Required • Flooring- Black Granite 18 mm Thick • Pit available/required- 1600 mm Deep, 2200 mm Available • Leveling Accuracy- +/-10mm Independent of Load in the car • Indicator- Digital Direction and position indicators in both car and at all landings • Guide Rails- Tounge & Groove Guide Rails • Maintenance- Free Maintenance for one year 2 year • Signal/Accessories- Press & Speak intercom system among cars & reception • Automatic Rescue Device (ARD) to automatically bring the Elevators at nearest landing in case of power failure only.

• Provision of CCTV Camera in Lift Car • Lift annunciator & Braille fixture • Full height Infra-red Safety curtain. • Fireman Switch at Ground floor only. • Stainless steel panels in false ceiling • Car operating Panel with door open/close button. • Diffused Lighting fixture/LED Lighting in car. • Alarm & Emergency light with re-chargeable battery • Over load Warning/Protection Device • Air fan at Ceiling for air ventilation (12" sweep). • Audio Signal in case of emergency stop/and interruption should be provided in the car • Correction device- Phase failure detection (Make: Otis/Kone/Mitsubishi/Schindler/Johnson/Fujitec)

Buyback of existing lift of same size and capacity with specification as above mentioned. (as on Item no. 8 )

S/I/T/C of passenger lift with capacity of 13 passengers 884Kg including all accessories and equipments. • Type & Capacity - 13 Passenger, 884Kgs. • Speed- 1.0 Meter Per Second • Type of Drive & Control- A.C. V.3.F. Microprocessor based Control. • Motor / Machine- Gearless with M/C Room • Travel- 32 Meters. (Approx.) • Serving- G + 8 Floor. 09 stops, 09 openings (All on same side) • Hoistway required- “2500 mm wide x 2400 mm deep” • Car size- “2000 mm wide x 1100 mm deep x 2400mm height” • Car Enclosure- Stainless steel Hairline finish. • Car Door- Stainless steel Hairline finish. • Landing Doors- All landing doors Stainless steel Hairline finish. • Car entrance & Hoist way entrance- Center opening doors 900 mm wide 2000 mm high with provision of emergency key opening at all landings. • Door Operation- Automatic Power operating with adjustable door opening & closing timing. • Control- Simplex, full collective control with or without attendants. • Operation- A.C. variable voltage variable frequency • Power Supply- 415 Volts ± 10%, 3 Phase, 50 Hz AC. • Over Head available/Required- 4800 mm Required • Flooring- Black Granite 18 mm Thick • Pit available/required- 1600 mm Deep, 2200 mm Available • Leveling Accuracy- +/-10mm Independent of Load in the car • Indicator- Digital Direction and position indicators in both car and at all landings • Guide Rails- Tounge & Groove Guide Rails • Maintenance- Free Maintenance for one year 2 year • Signal/Accessories- Press & Speak intercom system among cars & reception • Automatic Rescue Device (ARD) to automatically bring the Elevators at nearest landing in case of power failure only.

• Provision of CCTV Camera in Lift Car • Lift annunciator & Braille fixture • Full height Infra-red Safety curtain. • Fireman Switch at Ground floor only. • Stainless steel panels in false ceiling • Car operating Panel with door open/close button. • Diffused Lighting fixture/LED Lighting in car. • Alarm & Emergency light with re-chargeable battery • Over load Warning/Protection Device • Air fan at Ceiling for air ventilation (12" sweep). • Audio Signal in case of emergency stop/and interruption should be provided in the car • Correction device- Phase failure detection (Make: Otis/Kone/Mitsubishi/Schindler/Johnson/Fujitec)

Buyback of existing lift of same size and capacity with specification as above mentioned. (as on Item no. 10)

S/I/T/C of passenger lift with capacity of 13 passengers 884Kg including all accessories and equipments. • Type & Capacity - 13 Passenger, 884Kgs. • Speed- 1.0 Meter Per Second • Type of Drive & Control- A.C. V.3.F. Microprocessor based Control. • Motor / Machine- Gearless with M/C Room • Travel- 35 Meters. (Approx.) • Serving- B + G + 8 Floor. 10 stops, 10 openings (All on same side) • Hoistway required- “2500 mm wide x 2400 mm deep” • Car size- “2000 mm wide x 1100 mm deep x 2400mm height” • Car Enclosure- Stainless steel Hairline finish. • Car Door- Stainless steel Hairline finish. • Landing Doors- All landing doors Stainless steel Hairline finish. • Car entrance & Hoist way entrance- Center opening doors 900 mm wide 2000 mm high with provision of emergency key opening at all landings. • Door Operation- Automatic Power operating with adjustable door opening & closing timing. • Control- Simplex, full collective control with or without attendants. • Operation- A.C. variable voltage variable frequency • Power Supply- 415 Volts ± 10%, 3 Phase, 50 Hz AC. • Over Head available/Required- 4800 mm Required • Flooring- Black Granite 18 mm Thick • Pit available/required- 1600 mm Deep, 2200 mm Available • Leveling Accuracy- +/-10mm Independent of Load in the car • Indicator- Digital Direction and position indicators in both car and at all landings • Guide Rails- Tounge & Groove Guide Rails • Maintenance- Free Maintenance for one year 2 year • Signal/Accessories- Press & Speak intercom system among cars & reception • Automatic Rescue Device (ARD) to automatically bring the Elevators at nearest landing in case of power failure only.

• Provision of CCTV Camera in Lift Car • Lift annunciator & Braille fixture • Full height Infra-red Safety curtain. • Fireman Switch at Ground floor only. • Stainless steel panels in false ceiling • Car operating Panel with door open/close button. • Diffused Lighting fixture/LED Lighting in car. • Alarm & Emergency light with re-chargeable battery • Over load Warning/Protection Device • Air fan at Ceiling for air ventilation (12" sweep). • Audio Signal in case of emergency stop/and interruption should be provided in the car • Correction device- Phase failure detection (Make: Otis/Kone/Mitsubishi/Schindler/Johnson/Fujitec)

Buyback of existing lift of same size and capacity with specification as above mentioned. (as on Item no. 12)