Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.1 L
Closing Date
24 Mar 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
TENDER SEC
24 conditions · 5 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees and N= Number of yearsprescribed for completion of work for which bids have been invited. The average annualcontractual turnover shall be calculated as an average of "total contractual payments" inthe previous three financial years, as per the audited balance sheet. However, in casebalance sheet of the previous year is yet to be prepared/ audited, the audited balance Sheet of the fourth previous year shall be considered for calculating average annual Contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, long with copies of Audited Balance Sheets duly certified by the CharteredAccountant/ Certificate from Chartered Accountant duly supported by Audited BalanceSheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
b) Audited Balance Sheets clearly indicating contractual receipts from the works done for Govt./ Govt. bodies / PSUs/Pvt. Organization in the P&L Account of the balance sheet duly certified by the Chartered Accountant for the completed Financial years. For the current financial year, Provisional Balance sheet issued by Chartered Accountant, clearly indicating contractual receipts.NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC- 2022 [with up to date correction slip]
Definition of Similar nature of work: Execution of any Railway " Signal work" OR " Telecom Work" involving underground cable laying.
82 conditions · 11 needing a document upload
Have you submitted documents pertaining to status/contribution of the firm, partnership deed and power to attorney
Have you furnished full postal address, telephone number/Fax number
Have you submitted document of current income Tax Clearance Certificate
Have you submitted your offer inclusive of ED and all other Taxes and duties for the entire schedule
Have you registered with Assistant Labour Commissioner of the area where the work will be done. Necessary license to be submitted with the tender or to be produced before signing of the Contact Agreement.
Have you attested all the corrections
Have you submitted the bids containing Check List, Tender Notice, Declaration form, Instructions to Tenderers, Special Conditions of Contract, Technical Specifications, Annexures, schedule of Works & Offer.
Cost of tender document & EMD deposited through IREPS e- payment.
In case of Partnership firm : The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (No 8.2.1 Technical credentials are required for tenders having value up to Rs 50 lakh).
Submission of Certificate(s) in support of Financial Eligibility (No Financial credentials are required for tenders having value up to Rs 50 lakh).
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] Copy of PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).[iv} Copy of Certificate of registration of Partnership firm.
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper,(c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted:(a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and Articles of Association of the Company.(c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
IN CASE THE TENDER VALUE IS MORE THAN RS. 50 LAKHS; Tenderer/s shall submit a notarized affidavit on a non-judicial stamp paper stating that all their statements / documents submitted along with bid are true and factual.
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.16 of Part-I of IRSGCC. [in the format attached in - Documents] Annexure-3
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document if tender value is more than 50 lakh
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self- certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B)For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
Whether copies of the certificates in support of the receipt of contractual payments obtained from employer/clients and audited balance sheet duly certified by CA as prescribed in the tender for the last three years enclosed.
Please submit your bank details i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, GST and PAN Number
Partnership Deeds, Power Of Attorney Etc.: The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should upload the certified copy of partnership deed along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with tender, the tender will be treated as having been submitted by individual signing the tender documents. The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the contractor
The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partner s should submit along with the tender or at a later stage, a power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner s of the firm or any other person specifically authorising him/them to submit the tender, sign the agreement, receive money, witness measurements, sign measurement books, compromise, settle, relinquish any claim s preferred by the firm and sign No Claim Certificate and refer all or any disputes to arbitration
Uploading of Proforma for Self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Clause - 52 of Special Conditions of Contract ) (as per Proforma-16)
Uploading of Proforma of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Clause - 52 of Special Conditions of Contract ) (as per Proforma-17)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Various S&T works inconnection with Engineering Works & RPF Barrack Sub Work1: Proposed construction of RPF Barrack at Koppal (8 beds). Sub Work2:Proposed construction of designated building of RPF out post at Dharwad . Sub Work3:Proposed construction of FOB near ROB 26 A at KM 613 326 (BGM-SXB). Sub Work4 Proposed Foot OVer bridge near ROB 6 A at km 611.355 in LD-MRJ section . Sub Work5:Construction of RUB in lieu of LC No. 11 @ KM 19/820 in between SXH-AVA station respectively by Air/Box pushing method. Sub Work6: Strenthening of super structure by Re girdering of Re-gidering of Br.No.142/A (Span 1*13.18mPG RUB) at KM 680/500-600 between GPB-CKR Sations in LD-MRJ Section of hubli division. Sub Work7:Proposed rehabilatation/replacement of BR 189 at KM 723/297 With RCC Box Bridge in LD-MRJ Section in Between UGR-SED Station .Sub Work8:Proposed rehabilatation/replacement of BR 219 UP at KM 745/2100-200 With RCC Box Bridge in LD-MRJ Section in Between VJR-MRJPropsed Station . Sub Work9:Proposed Construction of Multipurpose community hall at Willey ground .Contingency fund.Sub Wor10 :Proposed Rebuilding /Replacement of Bridge No. 45 DN between HPT-GDG on account of ORN 3 Over UBL. Sub Wor11 :Construction of Pedestrain Subway [5.0 x 3.2 m] at KM 486/600 in between NVU - DWRstation. Sub Wor12 :KJG-DWR section:Construction of pedestrain/Two wheeler subway in view of safety for increasing sectional speed to 130 kmph [at KM 471/100] . Sub Wor13 :Signalling works in connection with Proposed construction of Foot over Bridge for Halt Station at Parakanahatti. Funds by CN (LD-MRJ DL)Sub Work14: SUBL-KJG Section: Provision of W beam metal barriers &fixed knot fencing along side the track for a total length of 104.12Km. Sub work 15 : Proposed closure of LC no 321 at Km 520/800-900 between KHST-LWR section by construction of RUB.
47UBL2025-26
47UBL2025-26
Open
Works - General
6 Months
Dharwad, Karnataka
₹0
₹2.1 L
24 Mar 2026
24 Feb 2026
10 Mar 2026
182 items across 6 schedules · ₹1,25,44,405.87 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Retro reflective tape Yellow colour of make - 3M/Avery Dennison/ORAFOL or equivalent confirming to ASTM 4956 specification (Inspection: Consignee ) | Square Foot | 500.00 | 259.6 | 1,29,800 |
| 2 | Supply of terminal block 6 way PBT 25mm as per RDSO Drg No. SA 23756/Alt.3 & IRS S. 75/91 & IRS. S. 23 with amendment No. 2 or latest (Inspection: RITES ) | Numbers | 10.00 | 456 | 4,560 |
| 3 | Supply of GRS App. Case full (Inspection: RITES ) | Numbers | 10.00 | 23,098 | 2,30,980 |
| 4 | Supply of E type lock of different wards as per requirement with Key per E type lock to Drg.No. SA.3376/M/latest and RDSO Specn. No.IRS.S.30/64 (Inspection: RITES ) | Numbers | 35.00 | 840 | 29,400 |
| 5 | Supply of Universal lock with one key for every ten locks(Inspection: Consignee ) | Numbers | 171.00 | 90 | 15,390 |
| 6 | Supply of gauge tie plate Nylon insulation as one set consisting of 1 insulating plate as per Drg No 10372-1 nos, 1.insulation bush as per Drg No - T-10368-3Nos, 3.Insulating washers as per Drg No T-10371-6nos, as per RDSO specification IRS:S:40/84 with Amdt.1 or latest amendment as applicable (Inspection: Consignee ) | Set | 300.00 | 163.54 | 49,062 |
| 7 | Supply of Nylon Insulation Material set for Stretcher Bar, as per RDSO Specification No. IRS: S-40/84 or Latest. One Set consisting of the following:- (1) Nylon Plate, Drg No. T- 10367, Qty:- 01 No. (2) Nylon Bush, Drg No. T10368, Qty:- 02 Nos. (3) Nylon Washer, Drg No. T-10371, Qty:- 04 Nos (Inspection: Consignee ) | Set | 300.00 | 190.41 | 57,123 |
| 8 | Supply of limit Switch new top roller type with 2 NO+2NC contacts as per RDSO specification no IRS/S-41/70 or Latest amendment suitable for Heidz make electrical lifting barrier of Indian railways. | Numbers | 20.00 | 531 | 10,620 |
| 9 | Supply of Power supply unit (2Amps) as per RDSO Specification, IRS TC 72/97 with amendment No.01 or latest with 12V/7AH SMF battery (Inspection: RDSO ) | Numbers | 5.00 | 5,664 | 28,320 |
| 10 | Supply of PD-1 (21KHz ) Card for high availability single section digital axle counter (HASSDAC) RDSO span No. RDSO/SPN/177/2012 Ver. 3.0 for BPAC G.G. Tronics .Accepted Make /Brand : G.G. Tronics India Pvt Ltd (Inspection: RDSO ) | Numbers | 4.00 | 39,530 | 1,58,120 |
| 11 | Supply of PD-2 (25KHz ) Card for G.G. Tronics make high availability single section digital axle counter (HASSDAC)as per RDSO Spec. No.- . RDSO/SPN/177/2012 Ver. 3.0 or latest.Accepted Make /Brand : G.G. Tronics India Pvt Ltd (Inspection: RDSO ) | Numbers | 4.00 | 39,530 | 1,58,120 |
| 12 | Supply of double wire signalling rope (Galvanized) 6X19 as per Spen No IRS:S 11/62 with latest amendements. The Galvanized wires to be useful for making ropes with Jute core. The tensile breaking strength 140/160Kgs/m2 and the nominal dia of the wire shall be 6mm. (Inspection: Consignee ) | Kg | 200.00 | 229.65 | 45,930 |
| 13 | Supply of data Analyser as per Technical specification (Inspection: Consignee ) | Numbers | 1.00 | 48,609.77 | 48,609.77 |
| 14 | Supply of Relay BOX for HASSDAC system (Inspection: RDSO ) | Numbers | 5.00 | 29,500 | 1,47,500 |
| 15 | Supply of Boom for Mechanical Lifting Barrier 10 Mtrs. long(as per RDSO Specn No.SA 7974/m. (Inspection: RDSO ) | Numbers | 2.00 | 42,043.4 | 84,086.8 |
| 16 | Supply of lifting barrier winch. (Inspection: RDSO ) | Numbers | 1.00 | 79,806 | 79,806 |
| 17 | Supply of Ground lever frame 1 lever. (Inspection: RDSO ) | Numbers | 1.00 | 38,610 | 38,610 |
| 18 | Supply of Pole lock for lifting barrier. (Inspection: RDSO ) | Numbers | 2.00 | 25,570 | 51,140 |
| 19 | Supply of Wire rope steel galvanized greased Steel wire rope flexible for L-Xing Gate, size- 6mm dia, 6X19 ply, IRS-S-11/ 62 (Inspection: Consignee ) | Metre | 200.00 | 219.98 | 43,996 |
| 20 | Supply of D.W pulley supporting bracket 2 way (Inspection: Consignee ) | Numbers | 10.00 | 239.61 | 2,396.1 |
| 21 | Supply of D.W pulley stakes to Drg No.S 3065/M (Inspection: Consignee ) | Numbers | 10.00 | 136.63 | 1,366.3 |
| 22 | Supply of D.W rope wheel 2 pairs(Inspection: Consignee ) | Numbers | 10.00 | 2,764.62 | 27,646.2 |
| 23 | Supply of D.W rope wheel vertical 5.1 Kgs (Inspection: Consignee ) | Numbers | 10.00 | 324.65 | 3,246.5 |
| 24 | Supply of D.W wire adjusting screws long 12mm dia (Inspection: Consignee ) | Numbers | 10.00 | 95.04 | 950.4 |
| 25 | Supply of 'A' type foundation (Inspection: Consignee ) | Numbers | 20.00 | 3,105.33 | 62,106.6 |
| 26 | Supply of Roller stands(Inspection: Consignee ) | Numbers | 20.00 | 314.9 | 6,298 |
| 27 | Supply of Top Roller (Inspection: Consignee ) | Numbers | 20.00 | 56.98 | 1,139.6 |
| 28 | Supply of Guide Roller pins(Inspection: Consignee ) | Numbers | 20.00 | 12.94 | 258.8 |
| 29 | Supply of bottom Roller for LC gate M.S. Iron. (Inspection: Consignee ) | Numbers | 20.00 | 92.75 | 1,855 |
| 30 | Supply of Horizontal Crank 300mm x 300mm (Inspection: Consignee ) | Numbers | 6.00 | 3,130.61 | 18,783.66 |
| 31 | Supply of Vertical Crank 300mm x 300mm. (Inspection: Consignee ) | Numbers | 2.00 | 3,474.98 | 6,949.96 |
| 32 | Supply of Point rodding Solid 33mm x 18 feet length. (Inspection: Consignee ) | Numbers | 6.00 | 3,474.98 | 20,849.88 |
| 33 | Supply of trestle 2 way (Inspection: Consignee ) | Numbers | 10.00 | 860.34 | 8,603.4 |
| 34 | Supply of Single End screw joint 33mm butt end. (Inspection: Consignee ) | Numbers | 2.00 | 919.47 | 1,838.94 |
| 35 | Adjustable Crank for LC gate (Inspection: Consignee ) | Numbers | 20.00 | 3,489.2 | 69,784 |
| 36 | Supply of Solid joint butt end for LC gate (Inspection: Consignee ) | Numbers | 10.00 | 724.68 | 7,246.8 |
| 37 | Supply of Solid joint coupling end LC gate (Inspection: Consignee ) | Numbers | 10.00 | 724.68 | 7,246.8 |
| 38 | Supply of D.W.Pulley 2 way (Inspection: Consignee ) | Numbers | 10.00 | 295.24 | 2,952.4 |
| 39 | Supply of LC Gate panel (Inspection: Consignee ) | Numbers | 1.00 | 73,570 | 73,570 |
| 40 | Supply of FRP road warning equipment (Inspection: RITES ) | Set | 2.00 | 11,979 | 23,958 |
| 41 | Supply of Electric Key transmitter (Inspection: RDSO ) | Numbers | 1.00 | 8,040 | 8,040 |
| 42 | Supply of crank handle box / Emergency key box made of teak wood with glass fronted door (Inspection: Consignee ) | Numbers | 1.00 | 4,776.66 | 4,776.66 |
| 43 | Supply of surface base to suit CLS signal pole 140mm dia with necessary inspection as per specification / drawing/ description enclosed in this document (Inspection: RITES ) | Numbers | 2.00 | 6,588.8 | 13,177.6 |
| 44 | Supply of main signal unit made up of FRP without lences and transformers confirming to RDSO Spec. No RDSO/SPN/194/2006 Rve.2.0 with latest amendmnent, Signal Unit - 2 Aspect as per Drg No SA23003A/M with latest alteration)(Inspection: RITES ) | Numbers | 2.00 | 24,118.92 | 48,237.84 |
| 45 | Supply of color light signal pole 140mm dia, 4.6m/3.6m tall with necessary inspection as per specification/ drawing/description enclosed in this document.B) Supply of color light signal pole (3.6m)(Inspection: RITES ) | Numbers | 2.00 | 4,758.4 | 9,516.8 |
| 46 | Supply of ladder with platform and shoes for 3.6m CLS pole(Inspection: RITES ) | Numbers | 2.00 | 4,942.4 | 9,884.8 |
| 47 | Initial charging of Secondary cells 2 Volts/ 200AH | Numbers | 15.00 | 412.3 | 6,184.5 |
| 48 | Supply of Battery charger 230V/ AC / 24-26- 28V DC 30 capacity. RDSO specification No. IRS.S.86-2000 (or latest) for Signal / Telecom applications suitable for Axle counter. (Inspection: RDSO ) | Numbers | 1.00 | 46,323.3 | 46,323.3 |
| 49 | Supply of Multi Core wire coil 16/0.2Sqmm PVC Insulation copper ATC cable of 100 meters length of Each coil As Per IRS.S.76/89 Amendment T 3 OR latest, (Inspection: Consignee ) | Numbers | 50.00 | 765.82 | 38,291 |
| 50 | Supply PVC wire coils of size 28/03 multi strand flexible Spec . IRS. S76/89. Excise Duty. Amendment, NO.2 or latest. Each oil of 100 mtrs. Length of Red and black colours, material should be from RDSO approved firms only (Inspection: Consignee ) | Numbers | 3.00 | 1,929.3 | 5,787.9 |
| 51 | Supply of PVC insulated wire multi strand copper conductor 10 Sq.mm flexible specification IRS. S76/89 amendment No. 2 or latest. Each coil of 100 mtrs length. To be procured from RDSO approved firms (Size 140/0.3 mm) (Per Unit=Coil) (Inspection: Consignee ) | Per Unit | 5.00 | 2,534.25 | 12,671.25 |
| 52 | Supply of Non deteriorating type of fuse holders & fuse links electric fuse for Railway Signalling Voltage-240 AC/DC, to Specn. No. IRS. S 78/92 (IRSS-78/97 tentative) IS: 13703 (Part 2/Sec2) 1993 suitable for E1 fuse 20 Amps SC-20 Holder safe clip / knife edge type size E1 (R-SS) amp (A) Fuse Holder 20A Capactiy (Inspection: RDSO ) | Numbers | 25.00 | 232.5 | 5,812.5 |
| 53 | Supply of Non deteriorating type of fuse holders & fuse links electric fuse for Railway Signalling Voltage-240 AC/DC, to Specn. No. IRS. S 78/92 (IRSS-78/97 tentative) IS: 13703 (Part 2/Sec2) 1993 suitable for E1 fuse 20 Amps SC-20 Holder safe clip / knife edge type size E1 (R-SS) amp (B) Fuse links 6 Amps (Inspection: RDSO ) | Numbers | 5.00 | 32.55 | 162.75 |
| 54 | Supply of Non deteriorating type of fuse holders & fuse links electric fuse for Railway Signalling Voltage-240 AC/DC, to Specn. No. IRS. S 78/92 (IRSS-78/97 tentative) IS: 13703 (Part 2/Sec2) 1993 suitable for E1 fuse 20 Amps SC-20 Holder safe clip / knife edge type size E1 (R-SS) amp (C) Fuse links 2 Amps(Inspection: RDSO ) | Numbers | 20.00 | 31 | 620 |
| 55 | Supply of ARA terminal Block PBT 6 way 25mm centre as per RDSO Drg No. SA23756 Alt3 and specification No. IRS:S 75/2006 WITH LATEST AMENDEMENT IF ANY. The material shall be procured from RDSO approved firms only, followed by RDSO inspection before making over the supply to consignee. Inspection: - RDSO | Numbers | 25.00 | 329.89 | 8,247.25 |
| 56 | Supply of terminal block 1 way PBT 60mm as per RDSO Drg No. SA 23745/Alt.5 & IRS.S 75/91 & IRS.S.23 with latest amendment (Inspection: RITES ) | Numbers | 10.00 | 180.06 | 1,800.6 |
| 57 | Supply of GKP type location box full size as per Drg. No. S&T / MFT 2378 (Single) (Inspection: RITES ) | Numbers | 4.00 | 44,863 | 1,79,452 |
| 58 | Supply of GKP type location box half size as per Drg. No. S&T/MFT 2378 (half) (Inspection: RITES ) | Numbers | 2.00 | 32,279 | 64,558 |
| 59 | Supply of material to construct Unit maintenance free eath consiting as per RDSO spec. No. RDSO/SPN/197/2008 consisting of a) Copper bonded steel electrode of 3.0m long, 17 mm dia with copper bonding thickness min 250 micron and UL listed. b) Earth enhancement compound of RDSO approved brand supplied with sealed bags of min. 10 Kg - 03 bags. c) Copper strip of 200x25x6mm to terminate earth rod - 02 Nos. d) Copper strip of 300x25x6mm (MEEB) - 01 No. e) Supply of 35 Sq.mm Multi strand single core PVC insulated copper cable as per IS: 694 - 10 mtrs (Inspection: RDSO ) | Set | 2.00 | 26,097.35 | 52,194.7 |
| Schedule total | ₹22,75,960.36 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
JPO
ATTACHMENT
GCC book
ATTACHMENT
TenderTechnicalBook.pdf
ATTACHMENT
TenderSpecialConditionbook.pdf
ATTACHMENT
InclusionofnewJPOinWTTLettertoPCOM01.05.2024withencloser-pages_compressed.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
TenderSignalTechnical.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .