Fabrication, Erection and testing of LPI Header Piping at PRP Site, Kalpakkam

Amount

Supply of Seamless Carbon Steel as per ASTM A106 Gr. B Pipes inclusive of Testing (Chemical composition, Mechanical properties and 100% Hydrotest) and transportation charges -6 inch Sch. 40 Pipe

Supply of Seamless Carbon Steel as per ASTM A106 Gr. B Pipes inclusive of Testing (Chemical composition, Mechanical properties and 100% Hydrotest) and transportation charges - 4 inch Sch. 40 Pipe

Supply of Seamless Carbon Steel as per ASTM A106 Gr. B Pipes inclusive of Testing (Chemical composition, Mechanical properties and 100% Hydrotest) and transportation charges - 1.5 inch Sch. 40 Pipe

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)-8 inch Sch. 40 LR Elbow 45 Degree

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 8 inch Sch. 40 LR Elbow 90 Degree

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 6 inch Sch.40 LR Elbow 45 Degree

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 6 inch Sch.40 LR Elbow 90 Degree

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 4 inch Sch.40 LR Elbow 90 Degree

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 6 inch Sch. 40 equal Tee

Supply of Seamless Carbon Steel Sch. 40 fittings as per ASTM A234 WPB (100% DPT & Hydrotest)- 6 inch X 4 inch Sch. 40 unequal Tee

Butt Welding of Pipes of sizes 100 NB & 150 NB using SMAW/GTAW method including of supply of consumables, DPT of root and final passes and 10% Radiography of joints.

Socket/Fillet Welding of Pipes of sizes100 NB & 150 NB using SMAW/GTAW method including of supply of consumables, DPT of root and final passes.

Erection of CS Pipes inclusive of gas cutting & removal of worn-out piping and its disposal, erection of scaffolding, servicing of Flange Joints, replacement of worn-out bolts with new bolts, servicing of Gate Valves, providing CAF Gaskets, making hole in the Brick Wall, provision of PVC Sleeve for wall penetration, Hydrotest of piping etc.

Servicing of 100NB Gate Valves (Test Pressure: 16 kg/cm2; Operating Temp: 40 Deg. C) inclusive of replacement of worn-out parts, supply and replacement of worn-out bolts, elastomers, gland rope for stuffing box etc. as per Technical Specification

Fabrication of CS Pipe Supports from Angles, beams, Channels etc. (Supply of Raw Material in Contractor's Scope) as per Technical Specification

Providing and making pipe line support, cast in situ Reinforced Cement Concrete M35 grade at using machine crushed hard broken granite stone of maximum size 20mm, curing , mechanical mixing, transporting, placing of lifts vibrating, consolidation, placing in position and removing of Formwork for all insitu concrete works including reinforcement (TATA/SAIL/ViZAG make) the size of raft 700x700x200mm and coloumn/beam size is 300x300mm in raft 4 nos.10mmdia bars in coloum/ beam 4nos of vertical main bar12mm dia bars and stirrups 8mm dia150mm C/C etc., as directed by Engineer in Charge.Note: minimum cement content is 380kg/Cum.

Providing and laying Cement Concrete 1:3:6 using 20mm and downgraded size hard granite broken stone in foundations, trenches etc. including necessary form work, ramming, compaction, leveling, mechanical mixing, curing, dewatering, if any, complete all as per drawing , specification and directed by Engineer in charge.

BOOFI ENG & CONSTRUCTION

SRI RAM ENGINEERS