33/EEC/BSNL/CD/BGL/2021-22

Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):

18 mm thick

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).

Size of Tile 600x600 mm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

New work (two or more coats) over and including water thinnable priming coat with cement primer.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length 15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Dismantling aluminium partitions, doors, windows, fixed glazing board etc including disposal of unserviceable material and staking the same carefully with in the premises at all levels etc. complete as per the directions of the Engineer-in-charge.

Erection and assembling of aluminium partitions including aluminium frame work/glass/particle board, doors with the available materials by cutting to the required size etc & fixing to the walls/floors/RCC members/roof ceiling etc. with necessary cleats and rubber beading etc. complete as per the directions of engineer in charge.(The rate includes the cost of cleats, rubber beading and any other incidental materials).

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including credit of dismantled flushing cistern and disposal of unserviceable material with in 50metres lead:

Removing of wash basin along with accessories which have come out from the wall along with brackets and including credit of dismantled and disposal of unserviceable material with in 50metres lead:complete as per the directions of Engineer-in-charge.

Cleaning of entire internal portion of Ladies/Gents toilets with very mild acid/approved soap solution , cleaning of dados and flooring including Wash basin, water closet , Urinals etc.(Cost included removal of all the accumulated waste materials,cobwebs ,dirt and dust) complete as per the direction of Engineer-in-charge.

Providing and Fixing Roller Blinds of required size Green Screen Roller Blinds from HUNTER DOUGLAS make or rate and quality equivalent with following specifications: a) The DRIVE UNIT shall be of moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left side of the Shade. b) The Shade when lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock. c) the END PLUG shall be moulded of plastic with a steel location pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit). d) The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or left hand positions differentiated by the acceptance of the rectangular drive unit support or the round idler plug pin. e) The ROLLER TUBE shall be of extruded aluminium with 38mm internal diameter & skin thickness of 1mm and shall incorporate a keyway integral with the tube to accomodate the spline. the outside diameter of the roller tube shall be 40mm. f) the BOTTOM RAIL shall be a stiffening rod pocket. The material may be timber, PVC covered steel tube or Venetian Blind Bottom rail. g) The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ball chain for raising or lowering action of the shades. h) The FABRIC will be 100% PVC free, made from 100% Polyester and eco friendly with no Volatile Organic and satisfying NFPA fire safety standard, A bottom pocket shall be created in the fabric to incorporate the bottom rail, at all leads & lifts etc., complete as approved by Engineer-in-charge.

Providing and fixing of SUN CONTROL FILMS of approved brand and quality with shade of transparency on glass surface doors, windows, partitions etc. complete as directed by the Engineer-in-charge.

Extra for providing & fixing sliding channel with ball bearing gears of approved quality & design for aluminium door shutter width up to 1.20 metre instead of hinges/pivots over the item no.6(b) for aluminium door shutters.

Dismateling ply wood cubboard below the windwo sill, ply wood shutters, ply wood frames, glass panes with sliding trac with frame and fittinga, stacking the same at Basement floor etc., complete.

Dismateling ply wood cubboard below the windwo sill, ply wood shutters, ply wood frames, glass panes with sliding trac with frame and fittinga, stacking the same at Basement floor etc., complete.