REPAIR/ REPLACEMENT TO PERIODICAL SERVICES, REPAIRS TO JOINERY, ROOF SHEET, WINDOWS VENETIAN BLINDS, PLUMBING, SAINTARY FITTINGS AND OTHER CONNECTED ITEMS AT CENTRAD UNDER GE (EAST) DELHI CANTT-10

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic light shade matte/ Glossy finish tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and grouting with epoxy, laid over and incl 15 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) Make :- Kajaria or equivalent in Somany / Johnsion/ Nitco

M & L for Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and and grouting with epoxy, laid match over and incl 15 mm thick cement screed 1:6,complete in all respect as specified.

Description all as per item No. 3.00 here-in-before but on vertical surfaces laid over and including 10 mm thick plaster in cement mortar 1:4, complete all as specified and as directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm or 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC) Make :- Somany or equivalent in Kajaria/ Johnsion.

M & L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Somany or equivalent in Kajaria/ Johnsion

S & F in repair extruded aluminium alloy section body door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each cast iron body complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete for glass/aluminium door as directed by Engineer in charge.

Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed.

S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane or rubber beading as required complete all as specified & directed.

S & F 10mm thick Toughned glass as in window, doors,patitions automatic doors and similar work includng cutting to shape, drilling holes and rubber beading compete all as directed by the Engr-in-Charge.

Supply and fixing 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hydraulic hinges (Make : Atlantic / Lapo/ Hettich), handle, ball catchers including mortice locking arrangement (Make: Doorset / Godrej / Yale), hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities incl dismantling of existing complete all as specified and directed.

S&F in repair bevelled edge looking mirror 6mm thick of approved shape & size of superior quality glass mounted on wall with screws, washers complete all as specified & directed.

S & F in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug and making good the surface by white cement to match the wall shade complete all as specified and directed.

S&F in repair white vitreous china battery based infrared senser operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-0704 & SNR-CHR-51097 or equivalent model of Parryware/Hindware

S & F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. MAKE : Parryware / Hindware /Jaquar

S & F in repair vitreous china water closet squatting pan ‘Orissa pattern” size 580x440mm white with integral foot rests including provision of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface complete all as specified and as directed.

Supply and fixing in repairs floor/wall mounted coupled star white one piece water closet (Pedestal pattern) (Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set, incl flushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti syphonage pipe etc. complete in all respect as specified and directed. Make : Hindware cat part No 92551 (S-22) 70 x 38 x 73 Cm or equivalent in Kohler / Jaquar

S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern complete all as specified. MAKE : Parryware / Hindware / Jaquar

S&F in repairs Square shape Hindware fonte ceramic table top wash hand basin Star white Italian collection (Model No. 91043 of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete in all respect as specified and directed MAKE : Hindware (Model No. 91043) or equivqlent in Kohler / Jaquar

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning or refixing or removal to store complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like in one piece, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, coking plateform and other similar situations complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick laid over and incl 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and incl 20mm screed bed in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed.

S&F 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment all as specified and directed. (Work to be executed in G+2 building, rates of scaffoulding etc shall be deemed to be included in rates quoted)

Demolition of Cement Concrete of any description and in any position complete all as directed.

M&L for PCC 1:2:4 Type B1 (Using 20 mm graded aggregate) in for coping, kneelers, apex stones, bed plates, kerbs etc including weathering, slightlty rounded or chamfered angles and throating all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and incl dismantling of existing kerb stone complete all as specified and directed.

M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of new or previously untreated surfaces of Kerb stone /concrete/plaster surfaces exceeding 10cm width or grith not other wise provided complete all as specified and directed.

M&L for complete removal of existing treatment from old concrete surface by scrapping with hand scraper and applying two coate of synthetic enemale paint over a coate of primer complete all as specified and directed.

S& F in repair 75mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent.

Dismantling of CI pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed.

S& F 100 mm dia CI sand cast soil waste and vent pipes in any length with or without ears, with cement joints fixed in walls/ floors complete all as specified and as directed.

S& F 75 mm dia CI sand cast soil waste and vent pipes in any length with or without ears, with cement joints fixed in walls/ floors complete all as specified and as directed.

S&F 75mm dia CI bends for CI pipes complete all as specified and as directed.

S&F 75mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F 100 mm dia CI bends for CI pipes complete all as specified and as directed.

S&F 100 mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F in repair 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc

M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of parapet walls finished and even & fair without using extra cement integral water proofing compound as per manufacturere's instructions (water proofing compound shall be measured and paid seperately) complete all as specifed & as directed.

M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specifed & as directed.

M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement on ceilings complete all as specifed & as directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using roller brush on walls over a coat of primer and over incl one coat of 1.50 mm thick Birla putty complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick Birla putty complete all as specified and directed.

M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) complete all as specified and directed.

M&L for scraping and clearing of door/ to remove existing polish filling, putty or existing hardeners for reparing of any wooden marks, scratches or scars and treated withputty/ primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface/ doors to obtain smooth and uniform looking complete all as specified and directed.

M & L French polishing on surface of any description width or girth including cleaning and preparing the surfaces including a coat of wood filler on new work/Old surfaces with two or more coats complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using roller brush on walls over a coat of primer and over incl one coat of 1.50 mm thick Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of Old wall / ceiling surfaces & applying two coat of plastic emulsion paint of ant tint, using roller brush complete all as specified and as directed

M&L for applying two coats of interior wall texture paint of authorised manufacturer/applicator including preparation of surface complete all as specified and as directed. Make: Asian Royale/Berger

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old wooden Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/wall paneling, blankets, any thickness, including cover fillets and frame complete.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet (colour as approved by Engr-In-Charge) instead of Plain colour PVC sheet inclusive of PVC frame work, PVC fillet, solvent cement, screws, fasteners and all required accessories and fixing the sheet at site on PVC frame as per specifications and drawing including complete all as specified and directed. Make : Rajshri or equivalent.

M & L for providing & fixing semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge

S & F in repair vertical venetion blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed. Make : Vista /Hunter Douglas.

S & F in repair roller blinds of any size and any colour (non-blackout series) with aluminium head rail, with chain operation complete all as specified and directed by Engr-in-Charge. (Make: Vista/Hunter Douglas)

Dismantling wrought iron or mild steel work of any desription not othewise provided for

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered/concrete work and match with existing surface complete all as specified and directed.

Fixing only in adjustment & repairs / replacement of all following joinery fittings, joinery items brass butt hinges, hydraulically regulated door closer, brass mortice lock, , door stopper, aluminium D type handles, tower bolts, sliding door bolt, aluminium door pivots, drawer locks, drawer channels & petty repairs like taking down & refixing, easing of doors etc complete all as specified and as directed.

Fixing only in adjustment & repairs / replacement of all following sanitary fittings, plumbing items leaking to stop-cock, bib-cock, swan neck tap, pillar-cock, gate valve, PVC connection, CP connection, CP 2 way and 3 way connection of auto flush for urinals from union, speeder etc by replacing the worn out rubber / PVC washer for 15 mm bore, making fully functional the leaking flushing cistern single / double symphonic type of any description of any size and taking down carefully chromium plated bottle trap, waste coupling, PVC / GI Waste pipe of size 32 / 40 mm dia waste water connection to WHB / urinals, senser taps, etc and removing all accumulated materials from the trap etc cleaning properly and refixing in the same position complete all as specified and as directed. Note for item No 76 & 77 (i) The rates quoted in the above item includes cost of T & P & petty materials for repairs like Nails, Screws, fevicol etc complete. (ii) Adequate tradesman /supporting manpower shall be deployed by contractor and they shall be present on all working days including Saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The The supervisor /site engineer of the contractor shall be forwarded detailed insturctions by concerned AGE/JE every morning for attending complaints on daily basis. The persons shall be detailed by AGE concerned every morning for attending complaints on daily basis. (iii) The material required will be paid seprately under respective item of this BOQ supply only. (iv) The complaints shall be attended on the day the complaint received before 1300 hrs. The complaints received after 1400 hrs will be attended on the other day before 1300 hrs. If complaints are not attended as per schedule a damage of Rs. 500/- shall be imposed on contractor for each complaint for each day. (v) Any delay in non-completion of complaints will be immediately communicated to AGE/JE. (vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against these items shall be made after due verification of complaint register & complaint slips by JE & Engineer-in-Charge.

Supply only Aluminium door closer hydraulically regulated, design No 2 universal type suitable for door shutter 701 mm to 850 mm in width and of weight 36 to 60 Kg each cast iron body all as specified Make : Hardwyn/Godrej

Supply only brass mortice lock handle Set, 4 lever 65 mm Lock Mechanism vertical type with duplicate key and handle set complete all as specified and directed.

Supply only brass body door stopper and tongue with hard drawn steel spring double 150 mm size fixed on floor complete all as specified and directed

Supply only aluminum alloy body door stopper double 150 mm size complete all as specified and directed

Supply only aluminum anodized ‘D’ type handles 125 mm complete all as specified and directed

Supply only 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

Supply Only 250 mm aliuminium alloy, anodised sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed

Supply only 2 lever brass drawer locks size 65mm complete all as specified and as directed

Supply only Key board channel of 300mm length complete all as specified and as directed

Supply only drawer channel of 300mm length complete all as specified and as directed

Supply only stainless steel Al-bihari Cabinet hinges for cupboard etc complete all as specified and as directed

Supply only Brass drawer handles, projection drop (50mm to 65mm) on screwed platecomplete all as specified and as directed.

Supply only 32 mm bore waste coupling brass chromium plated for VC sink, VC WHB, VC urinals, steel sinks etc with long screwed shanks and fly nuts, complete all as specified and as directed. Make: Jaquar Cat No: ALD 705 or equivalent model of Parko / Zim.

Supply only 32 mm bore waste pipe for WHB, Sink, Urinals etc complete all as specified and as directed.

Supply only complete internal fittings of PVC for flushing cistern single symphonic action type 10 ltr capacity including flush handle, rod and ball cock etc complete all as specified and as directed.

Supply only 32mm bore brass chromium plated bottle trap for wash hand basin, sinks, urinals, etc with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as directed.

Supply only 15 mm bore chromium plated fancy type brass two way angle valve with elegant knob screwed down high pressure screwed both ends for Iron pipe or for union complete including CP cap all as specified and directed. Make : Cera Cat No.: F2002211, Essco Jaquar Cat No: MQT-526A, Hindware Cat No - F740006CP

Supply only 15 mm bore chromium plated fancy type brass angle valve with elegant knob screwed down high pressure screwed both ends for Iron pipe or for union complete including CP cap all as specified and directed. Make : Cera Cat No.: F1003201, Jaquar Cat No: FLR-CHR-5053N, Hindware Cat No - F850073CP

Supply only 15 mm bore CP bib cock long nose brass chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed. Make : Cera Cat No.: F1003151, Jaquar Cat No: OPP-CHR-15037PM, Hindware Cat No - F340004CP

Supply only 15 mm concealed stop valve chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed.

Suupy only 15mm bore sensortonic senser faucet cromium plated swan neck/high neck for washbasins deck mounted complete with controll Box (Battery operated) all as specified & directed. Make : Cera Cat No.: F6010108 or Jaquar Cat No SNR- CHR-51011

Suupy only 15mm bore Pillar cock Swan neck spoout and aertor for WHB complete all as specified & directed. Make : Cera Cat No.: F1099104, Jaquar Cat No: FLR-CHR-5357N, Hindware Cat No - F570013

Supply only 600mm Long PVC connection with brasss nut suitable for 15mm bore pipes complete all as specified and as directed.

Supply only 125mm dia chromium plated gratings over nahani / floor traps including embedded the same in white cement to match complete all as specified and directed.

Supply only chromium plated toilet paper holder brass fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1153N or CERA Cat No - F5004110 or Kohler Cat No -5633IN-CP

Supply only chromium plated brass soap dish fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1131N or Cera Cat No - F5013116CH Kohler Cat No -25069IN-CP

Supply only tubular towel rail 20 mm dia 60 cm long of brass chromium plated fixed to wall with brass screw complete all as specified and as directed. Make: Jaquar ACN-CHR-1111SM/ Kohler Cat No -5630IN-CP/ Cera Cat No - F80012CP.

Supply only plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

Supply only WHB oval type Size 195mm x 550mm x 425mm complete making good the surface / joints with white cement complete all as specified and as directed.

Supply only CP Jet with 1200 mm CP, PVC connection pipe for EWC complete all as specified and as directed.

Supply only health faucet with 1m long flexible tube in CP finish & wall hook for EWC complete all as specified and as directed. Make: Jaquar Cat No: ALD CHR-573 or Kohler -98100IN-CP or Grohe Tempesta-f Trigger Spray Set (Silver).

Supply only Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed. Make : Cera/ Hindware Note for Supply only item No 76 to 109: Item as per Make and Cat No as mentioned in description will be supplied only.

Taking down door shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame without taking off shutters of any description not exc. 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 sq. m incl shutter after replacing chowkhats the old shutter shall be refixed in same opening complete all as specified and directed.

S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels with decorative face veneers both faces with lipping complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

S & F IInd Class HW 35 mm thick Plain framed, panelled shutter (any No panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed.

S&F IInd Class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Complete all as specified and directed.

S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed.

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing

S&F Brass butt hinges in 125 mm long type C11 with brass screws complete all as specified and directed.

S & F brass mortice lock 65 mm 6 lever vertical type with duplicate key and handle set complete all as specified and directed.

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.

S&F 300mm long, stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed, complete all as specified.

S&F 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl Filling hollow of frame with plain cement concrete 1:3:6 complete, as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

S & F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl Filling hollow of frame with plain cement concrete 1:3:6 complete, as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges,PVC magnet & necessary fitting and locking arrangement . (vi) Entire window shall be power coated with pure polyster coat of any shde as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be power coated with pure polyster coat of any shade as approved by GE. (vii) window shall have provision of for installtaion of window AC/ Desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-Charge. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, MS wire mess, 5 mm thick frosted glass etc, provision for fixing the exhaust fan complete all as specified and directed.

S & F Aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) Frame work for doors, windows,ventilators all complete as per architectural drawings and the directions of Engineer-in-Charge.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. Make : Prayag/ Sintex/Vectus

S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified and directed.

S & F in repair ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

M&L for welding in repair of metal thickness not exc 6 mm and length of weld exc 2.5 cm, not exc 5 cm complete all as specified and directed.

Demolition of existing treatment like PCC padding Cement Concrete (unreinforced) of any description including APP membrrane/plastering and leeping complete disposal of all debris to out side MOD land all as specifed & directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M & L brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in roof padding, roof kerb or mud stop, rounded or chamfered on edge complete all as specified and as directed.

M&L 15 mm thick Screed bed or bedding layer of CM 1:4 mixed with integral water proofing compound as per manufacturere's instructions . (water proofing compound shall be measured and paid seperately) complete all as specified and as directed.

Supply only water proofing compound liquid @ 200 ml / per bag of cement complete all as specified and directed.

M&L for heat reducing water proofing treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 degree celcius as per IS: 101 (P-7/Sec-3) 1990 having VOC less than 1.00 g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing heat reducing membrane will be laminated with 25 - 40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes cleaning the surface with wire brush and washing cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge.The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. The manufacturer / authorised vender shall give a warranty for the peformance& durability for 7years. Make : Starshield or equivalent.

Removing building demolished materials/ old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyond out side MOD land complete all as specified and as directed.

M & L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, shaft, chajjas, parapets bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed

S & F 4 mm thick FRP/ Fiberglass chhaja (Factory made) for building with required colour shade,size, design for outdoor complete fixing at site with 150 mm long fasterner including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides witrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws and incl aluminium sheet board / glass between panels, all complete all as specified and directed. (quoted rate incl aluminium section, 5.5 mm thick glass/aluminium panel sheet and all required accessories)

Supply only 6V Duracell ultra Lithium CR-P2 battery for senser based urinal/ pillar tap complete all as specified & directed.

Supply only 9V Ultralife Lithium battery for senser based urinal/ pillar tap complete all as specified & directed

Supply only 1.5V Duracell battery for senser based urinal/ pillar tap complete all as specified & directed

M&L for cleaning of manholes/Septic tanks/soakage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MD premises complete all as specified and directed. (Note : Maximum of 60 to 80 CUM or No of trip 20 Nos will be cleaned in a single working day by the Septic tank cleaning tanker machine).

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm at any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed. (Note : Maximum of 750 RM will be cleaned in a single working day by the Jetting machine, The cleaned sewage line shall be maintained and keep fully functional by removing any type of blockage, For any damage/casualty occure during working in sewer line or MH or at Other work shall be the responsibility of the contractor and the contractor shall take measures for working in sewer work and water will be provided by contractor.)

Demucking old surface channels/drains of depth up to 0.45m and any section or width including removing/refixing drain cover of any shape and size and spreading the muck in road side berms as directed .(Note : cost of dumucking includes for foul smell also)

M&L for removing old silicon completely from window frame and adjacent wall of external side and Filled the gap between window frame and wall adjacent with weather proof silicon sealant over backer rod of required size and of approved quality for outer side of complete window and as per direction of Engineer-in-Charge. (Work to be executed in G+2 building, rates of scaffoulding etc shall be deemed to be included in rates quoted)

S&F factory made RCC manholes covers conforming to IS-12592 (2002), medium duty with MS flat all round the cover of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed

Dismantling of Plain or corrugated steel sheeting, polycarbonate sheet or any type of sheet, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curved steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme/ Vectus

S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme / Vectus

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as directed

S & F 110 mm PVC (SWR) Cowl

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry Make Prayag,

Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed.

Removing spot blockage of WC / nahani trap / gully trap including disposal of material obtained from cleaning to a distance complete all as spd and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L 12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed.