GE/ALP(8199B) KOLKATA OF 2023-24

Amount

Taking down shutter and refixing in same opening size of shutter is exc 1.0 sqm not exc 2 sqm each complete all as specified and directed.

Resuring, Easing /adjusting without taking down shutter of size exc 1.0 sqm not exc 2 sqm each complete all as specified and directed..

Taking down aluminium door(any size) and refixing in same position ,change of pivot, beading, gasket, setting of door and change of damaged style /rail any length in aluminium section thickness not less 1.50 mm match with existing anodised /power coated complte all as spd and directed .

S&F for floor door stopper of overall length of cover plate in 150mm Aluminium alloy body abd tonuge with hard drawn steel spring complte all as spd and directed.

M&L for preparing old wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and directed.

M&L for preparing old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and directd.

S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg.

S&F in repair 5 mm thick beveled edge best quality looking mirror of size 600x450 mm fixed with screws complete all as specified and directed.

S&F in repair stainless steel soap dish fixed in wall with screws complete all as directed by Engr-in-Charge .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar),Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed .

M&L for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over10 mm thick rendering in CM (1:3) all as specified and directed.

M&L for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles n.exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry over a bedding layer of scread bed 15 mm thick in CM 1:4 and pointed in white/colour cement to match.

M&L for Granite(of any type) 18-20 mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:4) including grinding & polishing fixed in slab/steps complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 50 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

M&L for 15mm thick plastering on other than fair faces of wall surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.

M&L for preparing and removing existing surfaces and making new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.

S&F in repair sinks without drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mmx330mmx160mm complte all as spd and directed.

S & F in repair stainless steel toilet paper holder fixed with cp screws in wall ,complete all as spd and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as spd and directed.

S & F in repair 110/125 mm floor trap fixed in floor with grating including jointing with solvent (1:2:4) cement concrete,complete all as spd and directed

S&F 32 mm dia waste pipe for wash hand basin and urinal down pipe fixed in repairs complete all as specified and directed.

S&F in Repairs vitreous China wash down water closet pan ( padestal pattern) incl Pvc seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. complete complete all as specified.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.

S&F in repair 15mm bore CP angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed.

S & F in Repairs 15 mm dia CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, Chromium Plated, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repair 600 mm PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed .

S&F in repair 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as specified and directed .

S&F in repair 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed.

S&F in repair 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed.

S&F in Repairs Towel rail 600 mm long of brass chromium plate 20mm dia fixed with and including chromium plated brass screws & wooden/plastic cleats complte all as specified and directed.

Cleaning and dusting of GI pipes line 15 to 25 mm dia by GI wire and pressure pump and washing down whole GI line as specified and directed.

S&F in repair PVC Health faucet with all necessary fittings . (Make : PRAYAG or equivalent as approved by GE.

S&F in repair 15 mm bore Cp shower fancy type 150mm long neck complete all as specified and directed.

M&L for L-shaped rubberised corner guard for sharp vertical edges of length 1000mm, width 100 x 100mm reflective type of thickness 10mm complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc all complete as specified & directed.

M& L for Point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including PVC casing /caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metallic bodies of luminaires/ fan at other end complete all as specified and directed for the following:-

One light point / one fan point controlled by one, one way swtich.

One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 44 here in before but on independent board.

All as per ser item No. 44 herein before but with 2.5 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 44 here in before but one light point controlled by 2 way switches.

All as per ser item No. 44 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of bell push, 230 volts white finish all as specified and directed

Supply and fixing in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of step type fan regulator complete all as specified and directed.

Supply and fixing in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Supply and fixing in replacement angle type Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete

Supply and fixing in replacement switch socket combination 2 in 1, 5 pin, 6 Amps flush type all as specified and as directed

Supply and fixing in replacement switch socket combination 3 pin , 16 Amp flush type, all as specified and as directed

Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including pvc concealed conduit with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates, modular white plates,frame and sorroundings shall be included in quated rate , as per site requirement (No extra payment will be made for the same)

One light point / one fan point controlled by one, one way swtich.

All as per item No 54 above but for 5 Amp switch socket on the same board.

All as per item No 54 above but for 5 Amp switch socket on independent board.

All as per item No 54 above but size of cable 4 sq mm with earth wire of 4 sq mm complete

Al as per item no 54 above but for 2 way point wiring with cable of size1.5 sq mm with 1.5 sq mm earth wire suitable for light points at stair case.( Staircase lights).

All as per ser item No. 54 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing Switch modular type, single pole, 2 way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed.

Supply and fixing Switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing Fan Step Regulator modular type, two module, completes all as specified and directed.

Supply and fix LED Lamp 09Watt, B22 base all as specifired and directed (Make-Havells cat no-LHLDEUEBML8R009 or equivalent in make Philips/crompton)

Supply & fix LED tube 20 W Tube light fitting LED Batten with aluminum housing and integrated electronic driver with square profile extruded connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed (Make : Havells LUMILINEPLUSNEOBS20WLED865SPCSSIND or equivalent in make Philips/Wipro)

Supply & fix LED 9/10 W Tube light fitting LED Batten extruded and polycarbonate connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed ( Make-Havells LUMILINEBS10WLED865SPCWH or equivalent in make Philips/Wipro )

Supply and fixing LED 18 W (2X9W)Tube light fitting , 220V, AC decorative wall mounted type brushed nickel finish fixture with acrylic with 09 W LED Lamp B22 Base WW COLOUR, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed (Make-Havells cat No-LHFOAJE2TZ1I060 or equivalent make of Philips/Wipro )

Supply and fixing of LED 36/42 Watt recessed mounted fitting, energy efficient, decorative type suitable for armstrong/grid ceiling, with its super bright LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. ( Make- Havells VENUSNEO2X2PLR36WLD857G2 or equivalent in make Wipro/philips)

Supply and fixing of LED 10 W rechargeable torch Battery Capacity 3.7 V, 1800 mAh with side light with long range and high brightness complete with all accessories all as specified and directed ( Make- Havells LHEXTDPGEN1K010 or equivalent in make Wipro/philips)

Supply & fixing bldg security lighting of LED 35 watts highly efficient lighting solution anodised with heat resistance with accessories provided including necessary electric connection with all accessories required for fixing/mounting with nut bolt washer & clamp support on GI pipe1.5 meters of suitable diameter(as required at site) complete all as specified and as directed. (Make: Havells Cat No:ENDURAOMNIPLUSSL35WLED765PASYBOP or equivalent in make of Philips/Crompton.)

Supply and Fixing in replacement of energy saver LED bulkhead light fittings 10 Watts bulkhead lumianires,complete with all accessories prewired incl three core copper cable 23/0.0076 from ceiling rose to light fittings. ( Make - Havells CP No RGBYGEXFTS10WLD865SYMBOPC or equivalent of Crompton/Philips)

Supply and fix in repacemnt MCB DB double door with necessary lugs for incomming and outgong connections up to Copper/Aluminium conductor og 16 sq mm fixed on wall surface/concealed after taking down the existing DB of any make/ rating from any height for the following Way :-

MCB DB SPN 4 Way (Make : Legrand / Equivalent in L & T /Indo Asian /Standard )

MCB DB SPN 8 Way (Make : Legrand / Equivalent in L & T /Indo Asian /Standard )

MCB DB SPN 12 Way (Make : Legrand / Equivalent in L & T /Indo Asian /Standard)

MCB DB TPN 4 way (Make : Legrand / Equivalent in L & T /Indo Asian /Standard )

Supply and fix in replacement MCB of following rating . (Make: Legrand/L &T/ Standard Havell's)

MCB SP 6 to 40 Amp

MCB DP/SPN 6 to 40 Amp

MCB TP 6 to 40 Amp

MCB TPN 40 to 63 Amp

S&F VTPN prewired distribution board TPN-DPX 160 MCCB including one No MCCB 160 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 6 way complete all as specified and directed .(Make: Legrand 5077 57 12 way DPX³ 250+36 or equivalent in Schneider/ABB) Note : Rates of MCCB and MCB SPN/SP/TP shall be paid under respective item

Supply and fix MCCB 415 V of following capacity complete all as specified and directed ( Make: Indo Asian /Legrand /L & T /Standard/Havell's )

63 Amps 4 pole 16 KA

100 Amps 4 pole 16 KA

125 Amps 4 pole 16 KA

160 Amps 4 pole 16 KA

200 Amps 4 pole 25 KA

250 Amps 4 pole 25 KA

315 Amps 4 pole 35 KA

Supply and laying or fixing in replacement twin sub main cable with 2 x 4 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable including contineous earth wire 1 x 4 Sqmm copper conductor insulated unsheathed complete all as specified and directed of following:-

(a) In PVC concealed conduit

(b) In PVC casing caping

Supply and laying or fixing in replacement twin sub main cable with 2 x 6 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable , in pvc casing caping including continuous earth wire 1 x 6 Sqmm copper conductor insulated unsheathed complete all as specified and directed.

(a) In PVC concealed conduit

(b) In PVC casing caping

S & F in replacement of PVC rectangular block of sizes of following size for mounting switches, sockets, fan regulator, etc by punching required slots for switches/Sockets /Regulators as per site requirement including taking down the existing metal/PVC/Wodden boxes with back and top all as directed by EIC.

100 mm X100 mm square,50 mm deep

175 mmX100 mm , 50 mm deep

200mmX150 mm , 50 mm deep

250mmX200 mm 50 mm deep

M&L industrial laminated sheet board/hylem sheet of size 6 mm thick of any size for for mounting switches, sockets, fan regulator, etc by punching required slots for switches/Sockets /Regulators as per site requirement including taking down the existing laminated top cover all as directed

Supply and fixing in replacement switch socket combination with box, 2 in 1, 5 pin, 6 Amps flush type all as specified and as directed

Supply and fixing in replacement switch socket combination with box 3 pin , 20 Amp flush type, all as specified and as directed

Supply and fixing in replacement 6 A surface 1 way switch all as specified and as directed

Supply and fixing in replacement 6 A surface bell push switch all as specified and as directed

Supply and fixing in replacement 20 A one way switch all as specified and as directed

Supply and fixing in replacement 15 Amps 3 pin plug top all as specified and as directed

Supply and fixing in replacement 5 Amps 3 pin plug top all as specified and as directed

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of (1:2:4) type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Supply and fix water proof junction box made from SMC sheet ready made of size 350 X 270 X 200 mm with aluminium bus bar of 200 Amp capacity for RYB and neutral fixed inside the junction box with necessary supporting insulators fixed on hylem sheet /Insulating sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole /Wall with MS clamp 25 X 5 mm and nuts & bolts,and connecting cables from junction box to fittings complete complete all as directed by Engineer-in-Charge.

All as per Item no 87 here in before but size 400 X 300 X 200 mm and bus bar capacity 400 Amps

Supply and fix power unit up to 25 Amps including sockets 25 Amps, 04 module box for mounting of power unit and power socket complete as specified and directed power unit . (Make - Legrand cat no-675558), sockets 25 Amps boxes 4M ( Make - Legrand Cat No 673047), 4 module Box (Make - Legrand Cat No 689009)

M & L in replacement of MS box of size 900 x300 x 1500 mm ( Double Door) 2.0 mm thickness , dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealed and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box , electric meters and fixing the new electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing complete all as specified and directed. Note : (a) Any plastering work involved while taking out old UNSV meter box and refixing the new meter box is deem to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deem to be included in this item rates.

M & L XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, in trenches/fixed on wall with supporting insulators/saddles etc for following size including taking down existing old U/S LT U/G cable complete.

50 Sq mm 3.5 Core

35 Sq mm 3.5 Core

25 Sq mm 4 Core

16 Sq mm 4 Core

Material & Labour galvanized iron tubing 40 mm bore (light grade) with all fittings for protection of cables, laid in trenches all as specified and as directed (Note : Excavation and earth work will be measured and paid separately ) (Make : TATA / JINDAL / PRAKASH)

S & F energy efficient 5 star rated 200 mm PVC air ventilating fan, complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose complete all as specified and directed.

Hindustan Traders

SOMANI BUILDERS

M. M. C. AND CO

Tirupati Buildcon Pvt. Ltd.

NICE INFOTECH