REPAIR MAINTENANCE OF MISCELLANEOUS FURNITURE ARTICLES UNDER GE WEST DELHI CANTT 10

Amount

ALMIRAH LARGE STEEL 1/2 H x 1/2 S (DRG No FD/E6/MAP/18)

Removing old existing unsv handles from Almirah and S&F new CP steel handle of size 100mm to Almirah large steel 1/2H,1/2S all as shown on drawing and as directed.

Removing old existing unsv locks from Almirah and S&F new brass lock 75mm long, 06 lever with two keys to Almirah large steel all as shown on drawing and as directed. Make shall be of Godrej/Harrison/Plaza.

Removing old existing unsv handle & locking assembly from Almirah and S&F new handle & locking assembly to Almirah large steel 1/2H,1/2S including making adjustment of door shutter and applying one coat of synthetic enamel paint as approved with spray painting over a coat of primer after preparation of steel surfaces complete all as shown on drawing and as directed.

Removing old existing unsv bottom legs from Almirah and S&F new bottom legs made out of 1mm thick MS black PBI sheet and made to size and shape and welding after applying one coat of synthetic enamel paint as approved with spray painting over a coat of primer after preparation of steel surfaces complete all as specified and as directed.

All as per Sr.item No. 1.04 here-in -before but bottom sheet of Almirah large steel 1/2H,1/2S.

All as per Sr.item No. 1.04 here-in -before but shelf of Almirah large steel 1/2H,1/2S.

Removing v butt hinges of Almirah large steel 1/2H,1/2S and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as directed.

Replacement old existing unsv conduit pipe with new CP steel conduit pipe of size 20mm dia having wall thickness 1.2mm to Almirah large steel 1/2H,1/2S all as specified and as directed. .

Replacement old existing unsv pelmite socket and S&F new Stainless Steel socket/brackets suitable for 20mm dia conduit pipes to Almirah large steel 1/2H,1/2S and all as specified and directed..

M&L for refixing of loose shelves with mild steel revitting/spot welding complete all as directed.

Removing old existing unsv bush from Almirah and S&Fnew brass bush to Almirah large steel 1/2H,1/2S all as specifed and directed..

BED HARD STEEL (DRG No FD/E6/MAP/08 (R))

Removing old existing unsv Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Century/Greenply/Duro).

Removing old existing unsv board from head board and S&F new board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing and as directed.

All as per Sr.item No. 2.02 here-in-before but foot board.

S&F in replacement hard rubber shoes at the bottom of leg all as shown on drg.

Welding to broken joints/ fixing bt nut bolts of bed hard steel all as directed .

CHAIR VERANDAH (DRG No FD/MAP/11)

Removing old existing unsv 16mm dia MS pipe frame complete and S &F new frame duly powder coated as per drg & direction of Engr-in-Charge.

Removing old existing unsv 12mm dia MS pipe back frame complete and S &F new frame duly powder coated as per drg & direction of Engr-in-Charge.

Removing old existing unsv 3mm th MS strip and S &F new MS Strips duly powder coated of appropriate size as per drg & direction of Engr-in-Charge.

Removing old existing unsv hard rubber shoe and S &F new hard rubber shoe as per drg & direction of Engr-in-Charge.

CHAIR COMPUTER (Drg No FD/E6/MAP/01)

Removing old existing unsv seat and back and S&F new seat and back of 12mm thick hot pressed moulded plywood covered with 50mm thick desine with contured lumber support for extra comfort moulded foam of 50 to 55mm density and tapestry cloth all as approved . All minor repairs and wedling shall be done for smooth functioning. Rest all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth not less than the rate of Rs. 250/- per meter.)

Removing of old existing unsv tapestry cloth from seat and back of Chair and S&F new tapestry cloth to seat and back of Chair Computer complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth not less than the rate of Rs. 250/- per meter.)

Removing of old existing unsv hydrulic system from Chair and S&F new hydrolic system complete as approved quality and all as directed by the Engineer-in-Charge.

Removing of old existing unsv broken wheel and S&F new twin wheel castors as approved and all as directed by the Engineer-in-Charge.

Removing old existing unsv pedestal Assy from chair and S & F new pedestal Assy moulded in black 30% glass filled nylone forged bright zinc plated with holding of castor wheel to each prong and all as specified and directed.

Removing old existing unsv arm rest and S&F new arm rest of black integral skin polyurethane reinforced with MS insert and weather resistance all as specified and directed.

CHAIR WRITING (DRG No FD/E6/MAP/12)

Removing old existing unsv seat and back and S&F new seat and back of 12mm thick hot pressed moulded plywood covered with 50mm thick desine with contured lumber support for extra comfort moulded foam of 50 to 55mm density and tapestry cloth all as approved . All minor repairs and wedling shall be done for smooth functioning. Rest all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth not less than the rate of Rs. 250/- per meter.)

Removing of old existing unsv tapestry cloth from seat and back of Chair and S&F new tapestry cloth to seat and back of Chair writing complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth not less than the rate of Rs. 250/- per meter.)

Welding to broken joints and repair to unfunctional parts for smooth function of Chair writng and all as directed.

S&F in replacement hard PVC shoes to Chair writng all as shown on drg.

Removing old existing unsv arm rest and S&F new arm rest of black integral skin polyurethane reinforced with MS insert and weather resistance all as specified and directed.

CHARPOY IP FOLDING WITH HARD TOP (DRG NO FD-388®

Removing of old unserviceable ply wood from charpoy IP folding and S&F new 08 mm thick BWR phenol bonded commercial plywood with unpolished edging (ISI marked) of suitable size of approved quality in two pieces fixed with suitable screw steel on top all as specified and as directed.

Welding to broken joints of charpoy IP folding all as directed .

S&F in replacement hard rubber/PVCshoes at the bottom of Charpoy IP folding all as shown on drg.

TEAPOY VERANDAH (DRG NO FD/E6/MAP/17)

Removing old existing unsv top from Teapoy verandah and supply and fixing the new top made out of 18/19mm thick pre- laminated particle board both side white duly post-formed top all as directed by Engr-in-charge. (Make : Action-tesa/Ecoboard/Greenlam)

Welding to broken joints of Teapoy verandah all as directed .

S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg and as directed.

Removing old existing unsv GI Jali from Teapoy Verandah and S&F new GI Jali duly painted with black paint to all steel surface of Teapoy Verandah complete all as shown on drawing and as directed.

BIN LINEN MULTIPURPOSE (DRG NO FD/E6/MAP/17)

Removing of old existing unsv top from bin linen and supply and fixing new top made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top and all as shown on drawing and as directed. (Make of pre-laminated particle board shall be of (Ecoboard/Action- Tesa / Greenply/Duro).

Removing of old existing unsv door shutters from bin linen multipurpose and S&F of new door shutters made out of 18/19mm thick teak faced prelaminated particle board with 04mm thick teak wood beading all around including 25mm CP knob and magnatic catchers as approved quality and as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply/Duro).

Removing of old existing unsv hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv handles and S&F of new chromium plated steel handles to bin linen multipurpose as per shown on drg and as directed.

Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv legs made of particle board and S&F of 4 Nos teak wood legs of size 45x45mm & 100mm long and short of size 40x25x350mm & long rail of size 40x25x900mm duly fixed at base as per dirn of Engr-in-charge shall be provided. Best quality Nylon buffer/ shoes of appropriate size shall be fixed at legs.

Removing of old existing unsv plywood from back side and S&F of new 12mm th BWR IS:303 plywood to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv drawer and S&F of new drawer with CP steel handle to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

BOOK CASE (Drg No FD-237 )

Removing of old existing unsv top from Book Case and supply and fixing new top made out of 18/19mm thick commercial pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No 9.01 here-in-before but shelf.

All as per srl item No 9.01 here-in-before but side of Book case.

Removing old existing unsv legs from book case and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv doors from the book case and S&F new doors made out of 18/19mm thick commercial pre-laminated particle board teak faced as per shape and size shown in drawing with piano type hinges fitted with SS Screws including 25 mm CP knob fitted with appropriate machine screw. Rest all as specified in drg and as directed.

Removing of old existing unsv back ply of book case and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

CHAIR DINING MAP (Drg No FD/E6/MAP/10(R))

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class teak wood by nails of appropriate sizewith favicol all as specified in drg and as directed by the Engineer-in-Charge.

All as 10.01 above but front leg

All as 10.01 above but side rail

All as 10.01 above front/ back rail

All as 10.01 above but stiffner

All as 10.01 above but back strip

M&L for removal of old existing unsv seat and S&F of New seat of foam cushion 4" thick 40 density covered with superior quality tepestry cloth as approved, fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

STOOL DRESSING CUSHIONED (Drg No FD/E6/MAP/14 )

Removing the complete old existing unsv seat from stool dressing cushioned and S&F of new seat made of 40 density,75mm thick foam cushion duly uphostered with leatherite cloth including bottom plywood 12 mm thick commercial . All as per existing drawing and as directed. (Leatherite shall not be less than Rs 250/- per meter)

Replacement of old existing unsv leg from existing stool dressing cushioned and supply and fixing the same size new leg made out of Ist class wood teak to stool dressing cushioned duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per item No 11.02 but replacement of stiffners of stool dressing cushioned.

All as per item No 11.02 but replacement of front/rear rail of stool dressing cushioned.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete stool and all as specified and as directed.

SIDE BOARD (Drg No FD-241/1112 )

Removing of old existing unsv top from Side board and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board,teak faced,ISI marked, with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make of pre-laminated particle board shall be of Ecoboard/Action- Tesa / Greenply).

All as per srl item No 12.01 here-in-before but door of side board including CP knob and continues piano type hinges.

All as per srl item No 12.01 here-in-before but side of side board.

Removing of old existing unsv back ply of side board and supply and fixing the new back ply of same size of 06mm thick commercial plywood (ISI marked),BWR grade all as shown in drawing and as directed.

Replacement of old existing unsv drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-lamianted particle board teak faced and including CP steel handle.Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish.

Removing of old existing unsv handle/knob from the side board and supply and fixing new 100mm long CP steel handle with steel screws as per sample ,shape and size all as per drawing and as directed.

Removing of old existing unsv legs frame from Side board and supply and fixing new Ist class hard wood teak leg frame of side board all as shown on drawing and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete side board and all as specified and as directed.

TABLE DINING 6 PERSONS (Drg No FD/MAP-II/03)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed (Make:- Ecoboard/Action- Tesa / Greenply) for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 13.01 above but S&F new leg made of 1st class hard wood

All as 13.01 above but long rail for Table Dinging 6 Person

All as 13.01 above but short rail

All as 13.01 above but support stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE DINING 8 PERSONS (Drg No FD-273)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed (Make:- Ecoboard/Action- Tesa / Greenply) for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 14.01 above but S&F new leg made of 1st class hard wood

All as 14.01 above but long rail for Table Dinging 6 Person

All as 14.01 above but short rail

All as 14.01 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE COMPUTER (Drg No FD/E6/MAP/03)

Removing of old existing unsv top from Table computer and supply and fixing the new top of same size made out of 18/19mm thick exterior grade particle board duly post-formed all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenlam).

Removing of old existing unsv bottom from Table computer and supply and fixing the new bottom of same size made out of 18/19mm thick exterior grade pre-laminated particle board with allround PVC edging all as shown on drawing and as directed. (Make:- Ecoboard/ Action Tesa/ Greenlam).

All as per srl item No 15.02 here-in-before but vertical board on side of Table computer.

All as per srl item No 15.02 here-in-before but keyboard tray of Table computer.

All as per srl item No 15.02 here-in-before but drawer of Table computer.

All as per srl item No 15.02 here-in-before but pull out mouse tray of Table computer.

Removing of old existing unsv telescopic channel of key board tray and supply and fixing new Mild Steel (CRC) with Zink Coating telscopic channel 350mm size to Table computer as directed by Engineer-in-Charge.

Removing of old existing unsv telescopic channel of mouse tray/ drawer and supply and fixing new Mild Steel (CRC) with Zink Coating telscopic channel of 300mm to Table computer as directed by Engineer-in-Charge.

S&F new Nylon buffers to Table computer all as shown on drawing and as directed.

S&F new knobs to Table computer all as shown on drawing and as directed.

DRESSING TABLE INCL STOOL (LADIES) (Drg No FD/MAP-II/07 )

Removing of old existing unsv looking mirror from table dressing ladies and supplying and fixing new looking mirror of appropriate size shall be fixed to the frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old existing unsv handle from table dressing ladies and S&F new 25mm size CP brass knob as per shape and size shown in drawing and as directed.

Removing old existing unsv piano hinges from table dressing ladies and S&F new piano hinges as shown in drawing complete all as specified and directed.

Removing old existing unsv telescopic channel from table dressing ladies and S&F new MS (CRC) with zinc coated telescopic channel (make : Heppo/ Earl bihari/ Hettich) as shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv magnetic catcher of table dressing ladies and S&F new magnetic catcher as per size shown in drawing complete all as specified and directed.

Removing old existing unsv cushion of stool of table dressing ladies and S&F new 75mm foam 40 D cushion covered with leatherite shown in drawing complete all as specified and directed.

Removing old existing unsv caster wheel of stool of table dressing ladies and S&F new heavy duty revolving nylon double wheel as shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (Drg No FD/E6/MAP/16 )

Removing of old existing unsv looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 1200 x 600 x 5.5mm thick shall be fixed to the frame of teak wood and polishing complete in all respect and all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old existing unsv 38x38 mm teak wood legs of table dressing gents and S&F new legs as per shape and size shown in drawing complete all as specified and directed.

Removing old existing unsv glass shelves of table dressing gents and S&F new 5.5mm th glass shelves supported on runner/ glass holder as shown in drawing complete all as specified and directed.

SOFA SET 05 SEATER WITH CUSHION (Drg No FD-281)

Removing of old existing unsv arm rest from existing sofa set 05 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 05 seater all as shown on drawing.

All as per item No. 18.01 here-in-before but front/rear rail of single seat of sofa set 05 seater .

All as per item No. 18.01 here-in-before but front/Rear rail of three seater of sofa set 05 seater.

All as per item No 18.01 here-in-before but side rail of sofa set 05 seater.

All as per item No 18.01 here-in-before but front legs of sofa set 05 seater.

All as per item No 18.01 here-in-before but rear legs of sofa set 05 seater.

All as per item No 18.01 here-in-before but wooden battens of sofa set 05 seater.

S&F foam cushion of size 22" X 21"X100 mm thick of 40 density duly covered with best quality tepstary cloth of approved quality and colour and all as directed. Rate of tapestry cloth shall not less than Rs. 200/- per meter duly stitched and fixing the same all as directed by Engr-in-Charge/ GE. Make of Cushion shall be of Sleepwell/ Feather-foam/ Kurl-on Goldline. The cover shall be removable duly provided with ZIP as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

Removal of tapestry cloth from existing foam cushion of Sofa set 5 seater and providing new cover of approved shade. Rate not less than Rs. 200/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete sofa set and all as specified and as directed.

TV TROLLY (Drg No FD/E6/MAP/04(R) )

Removing of old existing unsv glass shutters from TV trolley and S&F of new shutters made out of 5.5 mm thick acrylic sheet duly fixed with stainless steel fitting including magnetic catcher to existing TV trolley. All as per size and design shown on drg and as directed/approved by Engr-in-charge.

Removing of old existing unsv swivel type castors from bottom of TV trolley and S&F of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed.

Removing of old existing unsv top of TV Trolley and S&F of new top made of 18 mm thick exterior grade particle board duly post-formed all as per shape and size as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenlam).

Removing of old existing unsv bottom of TV Trolley and S&F of newone made out of 18 mm thick exterior grade pre-laminated particle board with PVC edging all as per shape and size shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenlam).

All as per srl item No 19.04 here-in-before but side of TV Trolley.

All as per srl item No 19.04 here-in-before but back of TV Trolley.

TRESTLE STORE ROOM (STEEL) (Drg No FD-1043)

Removing of dents and straighten the iron parts and Welding to broken joints all as directed and drg.

M&L for one coat of painting by means of spray painting with synthetic enamelled paint of appropriate shade and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery as required as trade practice complete all as specified and as directed by Engineer-in-Charge

PAINTING :- M&L for one coat of painting by means of spray painting with synthetic enamelled paint of appropriate shade and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery as required as trade practice complete all as specified and as directed by Engineer-in-Charge to the following steel furniture items :-

Almirah large steel 1/2H x 1/2S(FD/E6/MAP/18

Bed Hard Steel(FD/E6/MAP/08®)

Chair Vearandah(FD/E6/MAP/11)

Chair Writing(FD/E6/MAP/12)

Teapoy Verandah(FD/E6/MAP17)

Charpoy IP folding Hard Top(FD-388®)

Note:- Repair/Maintence of furniture items will also be done at SALARIA ENCLAVE (DWARKA) as per direction of Engineer-in-charge. Deduct Credit: for demolished/dismantled material of (-) Rs 59215.00(Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/s Krishna Construction Co.

M/S CHANDER SHEKHAR

M/s M M BAHL

NAVEEN TRADERS

M/S Parshant Associates

F.M. KHAN SONS

SMS Enterprises

M/S Shri Balaji Enterprises

M/S NEHAL ENTERPRISES