SPECIAL REPAIR TO OFFICER MARRIED ACCOMODATION BLDG NO. P-13, P-14, AND P-15 OF NOFRA INCLUDING COMMON AREA AT NAI JABALPUR KHAMARIA UNDER GE (P) NO 1 JABALPUR

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even & smooth without using extra cement in patches all as specified and directed by Engr-in-charge.

M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete , sub base complete all as directed.

M&L vetrified ceremic tiles in 8-9 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

All as per above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.

M & L Non Skid Coloured ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar with CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles colour 350x250x7-8mm / 450x350x7-8mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified.

M&L for vitrified paver color tiles 400 x 400, 10 to 12 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection.

M&L Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 15mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete

M&L Granite (of any type ) slab/tiles as cooking platform/shelf/Stair 16-18mm thick machine cut bedded including 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete

S & F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement Complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed

All as per item above but exc 1.50 Sqm n.exc 4 Sqm. complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each. complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening incl easing, adjusting etc all as specified and directed.

S&F in Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified .

S&F for wire gauge i.e. panel will be wire gauge in liew of double side prlam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete as per direction of Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification

S&F SS butt hinges100mm long medium weight, cold rolled fixed all as specified and directed.

S&F Double action spring hinges, mild steel with steel wire spring, stove enamelled (Automatic Self Closing Door SS hinges100mm) long medium weight, cold rolled fixed all as specified and directed.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed all as specified and directed.

S&F in repairs for Cupboards/Wardrobe of Factory made single extruded WPC (Wood Polymer Composite) 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified .

S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

S&F ball catches with 8mm dia steel ball/Magnectic and brass body and striking plate including letting in and fixed complete all as specified and directed.

M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and directed

S&F of ball bearing runners 45 mm telescopeic chennal 20 inch full extendion load capacity 50 kgs all as specified and directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters all as specified and directed.

S&F of of stainless steel (grade 304) wire basket (Storage,Thali, Plain,Cutlary, Height cup saucer and all other any type of SS item etc) pull out type of large utensils with multipurpose use as per site requriment with necessary fixing cloips etc. complete in all respect as specified and as directed by Engr-in-Charge.

Demolition of brick masonry built in cm incl quoins arches pillars etc.complete all as specified.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4.all as specified and directed by the Engr-in-Charge

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

S&F Providing and fixing Colour Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply and fixing of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified.

S & F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight upto 80 Kg of aluminium (Die cast) body complete all as specified and directed.

S & F in Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.

S&F 150mm Rim latch with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators all as specified and directed by Engr-in-charge.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares each pane complete all as specified and directed by Engr-in-charge.

S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L 10 mm thick cement plaster in CM 1:6 on internal & external surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement all as specified and directed.

M & L for rendering 5 mm thick in C:M 1:3 on Ceiling in patches and finishes and smooth complete all as specified and directed

Material & Labour for preparation of new external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M&L for prepareation of new internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.,over a coat of primer all as specified and directed.

M&L for Complete removal of existing treatment and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats onold work.,over a coat of primer all as specified and directed.

Applying wall care putty on wall surfaces (old / new) including rubbing, levelling and preparing the surfaces for receiving further finishes as directed.

M & L applying two coat of white wash on newly plastered ceiling surfaces including preperation of surfaces, complete all as specified.

M & L applying single coat of white wash on old ceiling surfaces including Complete removal of existing treatment and preperation of surfaces, complete all as specified.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M & L preparation of Old wooden surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 40mm bore pipe all as specified and directed by Engr-in-charge.

S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed.

S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 40 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking Down and Refixing 20mm old steel tubing and connection or old posittion (walls/ceiling/floors etc) concealed all as specified and directed by Engr-in-charge.

Taking Down and Refixing 25mm old steel tubing and connection or old posittion (walls/ceiling/floors etc) concealed all as specified and directed by Engr-in-charge.

S&F in repair 20mm bore gun matel glove or gate valve valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge.

S&F in repairs, 10litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete.

S&F in repairs vitreous china squatting pan Orissa pattern of size 580x440mm connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified .

S&F in repairs cascade duel flush one peace inbuilt flushing cistern vitreous china wash down water closet pan padestel pattern white including soft seat cover, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified .

S&F in repair ovel type counter top Wash hand basin flat back 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified.

S&F in repair Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .

S&F in repair Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .

S&F in repair Chromium plated soap dish including fixing arrangement complete all as specified and directed.

M&L in repairs PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

M&L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified by Engr-in-charge.

S&F in repair PTMT cabinet mirror of size 555x450x124mm complete all as manufacures instruction.

S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge.

S&F in repair kitchen plate rack made of stainless steel 900 x 930 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm .

S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair Brass Chromium plated WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S & Fin repair for Stop valves/Angle cock, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete.

S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed.

S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed.

S&F for in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed .

S & F in repairs brass chromium plated overhead shower 125mm size (square/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed.

S&F in repair brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engineer in Charge.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) including wooden/plastic beads complete all as specified and directed by Engineer in Charge.

Water proofing treatment to sunken floor of RCC slab as following steps-

(a) Applying first coat of chemical pidifin 2K (DR Fixit or equivalent) on cleaned plastered surfaces @ 0.86 kg/sqm (min) as recommended by manufacturers. Then Provide a layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as manufactures recommendations. After Apply second coat of chemical pidifin 2K (DR Fixit or equivalent) @ 0.86 kg/sqm (min) layer glass fibre mesh as recommended by manufacturers.

(b) Spouts of 50mm dia PVC pipes projecting at least by 150mm clear of face of the outer wall.

(c) 30 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate mixed with WPC @ 3% by weight of cement shall be provided on bottom.

d) The sunken portion shall be filled with PCC 1:7:12 type F2 using 40mm brick aggregate after carrying out required test for joints/water proofing. Note 1:- The treatment shall also be provided over side wall upto a ht of 150 mm above FFL Note 2:- Water proofing treatment will be carried out through authorised applicators approved by GE and testing charge included in item rate.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius.

S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius.

S&F 110mm bore PVC (SWR) cowl any radius.

S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed

S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.”

Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD. NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work

M&L PCC 1:2:4 type B1 using 40 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed.

Apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface.

M&L APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method all as specified.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete

M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces.complete all as specified

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 19 mm size PVC rigid non metallic conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed :-

(a) one light/fan /Bell point controlled by one, one way switch

(b) one light point controlled by one, Two way switch

(c) one switch socket outlet 5 A on same board with other switch

(d) one switch socket outlet 5 A independent with cable 1.5 sqmm

All as per item No. 121 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for Sub main wiring with 4 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 10 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 5 runs of 10 Sq.mm & one run of 40mm dia PVC Conduit will be measured as one unit

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 3 runs of 6 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and as directed. (NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 1.5 Sq mm and one run of 1.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and as directed. (NOTE:- two runs of 1.5 Sq mm + one run of 1.5 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

S&F Switch Modular 6A one way, 1 module complete all as specified and directed.

S&F Switch Modular 16A one way, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M&L for Bell, AC, 230 Volts, single pole complete all as specified and directed.

S&F in replacement of frame plate for modular switch 1 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 8 module with indicating lamp including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 12 module with indicating lamp including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement MS Housing box 1/2 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 6 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 8 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 12 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.

Supply and fixing sheet metal enclosure SPN with two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed

S & F LED light fitting Mirror type with high out put diffuser 7 watt 220 V AC decorative type fixture light with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED light fitting Mirror type 10- 12 watt 220 V AC adjustable type , decorative type fixture light CRP 20 with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED lights fitting 20 watt, 220V, AC decorative box type Tube light with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete.

S & F Round shape 1 x 12 watt 220 volts AC slim profile surface mounted down light with 700 to 1200 lumen complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED light fitting 10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix LED wall / surface mounted fancy llight fitting t LEDs complete all as specified and directed.

S & F in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with IP 65/66 protection complete including GI bracket of suitable size bent to shape and fixed on wall with metal fastners 2 Nos incl drilling of holes as reqd and connecting up with flexible copper cable from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.

S&F in replacement LED post top lantern 20 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Taking down ceiling fan/ exahausrt fan/ wall mounted fan , ceiling cable end, dismantling blades and removing fan , paintining of ceilingfan and exhaustfan complete in situ, with synthetic enamal paint by spraying inclufing filling cavities with filler,one coat after cleanng all dust etc and refixing the same .

M& L Heavy duty PVC Conduit, 25 mm dia concealed in Walls / Roofs / Floors / Ceiling etc. exclusive of boxes [Junction / Terminal but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for drawing Coaxial TV Cable or Telephone Cable etc complete all as specified

Labour for Removing and re-fixing LED fitting and fixture of any type and any capacity, keeping in safe custody and refixing the same after necessary B/R and ceiling work including replacing of clamps, twin core wire complete all as directed by Engineer-in-charge.

S & F in repairs Telephone Socket / Jack with Shutter, RJ-11, Modular Type, One Module including suitable Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet, Modular type Base / Grid Frame & Cover Frame complete all as specified.

S& F LED 7 Watt light with sensor plete including all fitting arrangement complete all as specified and directed.

S& F RG59 Coaxial Cable Wire RG-6 Cable including all fitting arrangement ( wall / suface ) required at site complete all as specified and directed.

M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar and neutral etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

S & F in repairs MCB DB, SPN, 8 Way, 240 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed.

M&L for MCB Distribution board Double door type SPN 4 way, sheet steel, powder painted for fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. (Servent Qtrs)

M&L for MCB TPN 4 pole 40 to 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M& L for RCBO, DP, 32 Amps, 100 mA complete all as specified and as directed.

M&L for MCB SP 6-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F replacement to unsv heating element of capacity 3 KW, 230 V ,, with 1.0 inch Bsp flange hex head nut with thermostate pocket suitable for solar water heater system of capacity 200/500LPD complete all as specified and directed

S&F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp 415 V complete all as specified and directed

M& L cross arms, bracings,supports,clamps and back plates fabicated from structural steel sections including nuts,bolts,washer,welding,bending cold or hot drilling holes for bolts,in any shape or size as indicated or directed and inclusive of one primer coat under coat and one finising coat of paint . complete all as specified and directed.( For Solar water heater).

Maintenane and repair of solar water heahting system (plant) of capacity 200 LPD, cleaning ,replacement of hose pipe servicing of complete system including panel and solar water tube ,cleaning of air blockage and minor repair with replacement of parts as requireed at site complete all as specified and directed by Engineer in Charge.

S&F heating element of capacity 2 KW , triangle type suitable for 25 Ltr geyser requireed at site complete all as specified and directed by Engineer in Charge.

S&F thermostat suitable for 25 Ltr geyser , with autocut requireed at site complete all as specified and directed by Engineer in Charge.

Taking down geyse of capacity 25 Ltr from existing position by removing all relectric connections and refixing the same including painting of geyser after removing old paint by two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed by Engineer in Charge.

Schedule of credit amount of Rs. 1,24,901.00 to be deducted during AOC

Please Enable Macros to View BoQ information

SCHEDULE OF CREDIT

Station : Jabalpur

Old U/S bib cock/angle cock/pillar cock/stop cock/ concealed valve of any size

Old U/S kitchen plate reck

Old U/S Wall Mixer ,basin mixer,sink mixer

Old U/S mirror/shelf of any size.

Old U/S towel rail/towel ring of any size.

Old U/S GI tubing of 15mm bore.

Old U/S GI tubing of 20mm bore.

Old U/S GI tubing of 40mm bore.

Old U/S Curtain rod of any type

Old U/S Particle board any size any thickness any pettern

Old U/S Chowkat or frame with shutter area n exc 1.5 sqm including iron mongry

Old U/S Chowkat or frame with shutter area exc 1.5 and n exc 4 sqm sqm including iron mongry

Old U/s wooden shutters any type any description each

Old shower rose CP brass

Old U/S bricks bats

Old U/S Wrought iron scrap

Old U/S flushing cistern

Old U/S nahani trap

Old U/S sink

Old U/S PVC RWP any dia incl fittings

Old U/S Health faucet

Old U/S Soap dish

Old U/S 500 lit PVC tank

Old U/S 1000 lit PVC tank

Old U/S PVC Scrap

Old UNSV point wiring of any size any make

Unsv switch /socket/Fan regulator/bell/ bell push and ceiling rose

Unsv switch modular cover plate/ housing box of any description

Old USNV sheet metal enclosure

Old UNSV light fitting any type/watt/ make

Old USNV MCB DB 8/4 way TPN

Old USNV MCB DB SPN 4/8 way

Old USNV MCB TPN

Old USNV MCB SPN /SP

Old USNV submain wiring of any size any make

Old UNSV earthing material with wire and Strip etc

Old UNSV Heating element / thermostat of any wattage

UNSV RG Cable

Old U/S 7 Watt light

Old U/S RCBO

Total