Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹42.0 L+₹2,435 (0.06%)Rejected-Finance 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹44.3 L+₹2.3 L (5.48%)Rejected-Finance 29 GANDHI NAGAR VETERINARY COLLEGE ROAD BIKANER 334001 RAJ | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹44.8 L+₹2.8 L (6.61%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
8 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
Garrison Engineer, Military Engineer Services, Nasirabad, Pin305601
REPAIR OF CUBBOARD, PLASTERING, TILLING AND OTHER CONNECTED WORK IN JCOs and ORs AND OTHER MD ACCN AT AJMER MIL STN
2023_MES_632182_1
8392/E8
Open Tender
Civil Works
Item Rate
335 days
GE Nasirabad
MES Contractor enlisted as Class Dand above and category a i having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
6 documents required · 6 mandatory
₹500
Yes
₹90,000
13 Feb 2024
11 Dec 2023
10 Jan 2024
11 Dec 2023
8 Jan 2024
25 Dec 2023
11 Dec 2023 - 25 Dec 2023
Amount
Supply and Fixing in repairs 18mm thick (one side decorative lamination & other side balancing lamination sheet density 600kg/m3) solid PVC board with edge bending on edges with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed. Make :- Rajshree/Kitply/Century or equivalent as approved by AO.
Supply and Fixing in repairs 12mm thick (one side decorative lamination & other side balancing lamination sheet density 600kg/m3) solid PVC board with edge bending on edges with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed. Make :- Rajshree/Kitply/Century or equivalent as approved by AO.
S&F in repair stainless steel Soft Close hinge with assembly, complete all as specified and directed. Make :- Godrej Code No. -5070
S&F in repair 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.
S&F stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 6154
S&F stainless steel plate/Thali basket of approved quality of size 520 X 485 X 200mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 6168
S&F stainless steel cutlery basket of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 6162
S&F stainless steel cup & saucer basket of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 6159
S&F stainless steel carousel basket of approved quality of size 600mm x 600mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 5819 (600mm dia)
S&F stainless steel two shelf pull out basket of approved quality of size 150 X 485 X 430mm complete all as spepcified and directed. Make :- Godrej SS 304 Code No. 6169
S&F steel ball bearing basket / trolly / Drawer channel 50cm long complete all as spepcified and directed. Make :- Godrej Code No. 8178
S & F in repairs for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge
Taking down old unserviceable WHB and S&F vitreous China, white wash hand oval type of size 570 x 445 mm, incl waste pipe and brackets etc complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing in repairs Chromium plated brass pillar tap of size 15 mm in WHB etc. screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge
S&F waste coupling chromium plated size 32 mm glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed by the Engineer-in-Charge (Make: Coronet/Jaquar Essco/Prayag)
Supply and fixing 15mm bore stop/angle valves cast copper chromium plated, fancy type ISI marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified and as directed by the Engineer-in-Charge (Make: Jaquar Essco/Prayag/Plumber/Jal)
Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet EWC with complete one set white ( incl all necessary accesories like rag bolts/gel gasket etc.(excluding flushing cistern & flush pipe ) with ‘P’ or ‘S’ trap of dia 100mm including provn of cement concrete bedding complete all as specified and as directed by the Engineer-in-Charge Make : Jaquar/Cera/Hindware/ Parryware
Supply and fixing in repairs Squatting pattern Water closet, Orissa pattern of vitreous china Size 580x440mm wide with integral foot rest (excluding flushing cistern & flush pipe ) with ‘P’ or ‘S’ trap of dia 100mm including provn of cement concrete bedding complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC valve less syphonic action type, low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float and handle & flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
M & L for 20 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, bathroom corner shelf, window cills,counter, cooking platform, top of wash hand basin and like set & jointed in neat cement slurry & pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half rounded at one corner and polishing of the exposed edges laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and directed.
S & F bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore of pipe complete all as specified and directed. (Make: Jaquar Essco/Prayag/Plumber/Jal)
S & F brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)
S & F in repair for pvc bathroom mirror cabinet of size 127mm x 343mm x 546mm wall mounted incl all fiittings to wall incl plugs complete all as specified by Engr-in-charge.
S & F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2020 complete all as specified and directed.
S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed of extruded section all as specified and directed.
S & F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc. ISI marked, complete all as specified and directed.
S & F aluminium alloy, anodised sliding door bolt, 250mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.
S & F 6 lever lock for cupboard, fixed complete all as specified and directed by Engineer-In-Charge. make Godrej,
S & F in repairs curtain rod 22 to 25mm dia rod made of stainless steel, etc. complete all as specified & directed.
S & F in repairs of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample etc. complete all as specified & directed.
S & F in repairs, 22 to 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials(round type)/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed.
S & F of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified.
M & L for rough cast plaster mix with crushed stone (6-10 mm) sand and cement in the ratio 1:1:1 over 15 mm thick rendering CM 1:4 as in under including two coat of cement base paint etc complete all as spd and directed by Engr-in-Charge.
Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering in CM (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (Note: WPC measured and paid separately)
Supply only liquid water proofingcomplete all as specified and directed. Make : Fosroc Conplast/Sika
Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed.
M & L preparation of old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.
M&L for newly plastered surfaces two coats of cement base paint on plastered/ concrete surfaces of walls including preparation of surfaces complete all as specified and directed.
Demolition of brick/stone masonry built in cement or cement lime mortar in any description complete all as specified and directed.
M&L for brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms)
S&F in repair stainless steel plate rack made of 1mm thick of over all size 900x900x200mmmm and approved quality complete all as specified and directed.
S & F chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
S&F anodised aluminium window and ventilator shutters, powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl frames complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M & L for providing precast cement concrete (1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete .
M&L for factory made 60mm thick machine pressed precast cement concrete coloured, reflective type interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 50mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
S & F 5.5mm thick plain/tinted sheet glass, ordinary quality and glazing rubber beading in square n.exc 0.50 sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.
M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of interior emulsion distemper on walls over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Demolition and breaking up of rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified & directed.
Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall or laid in floor, complete all as specified and directed. Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985
Supply & Fixed for 75mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall laid in floor, complete all as specified and directed. Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985
Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified. Note - UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534
Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.
Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified.
Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534
S&F PVC (SWR) 75 mm bore branch piece (Tee) fixed to walls with cement joint with or without ovel access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F PVC (SWR) 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.
M & L in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.
Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.
M & L for screed plaster 10mm thick in CM (1:4) on fair faces of brick work/Concrete surface/RCC/Stone patti surface mixed with WPC incl necessary doubingout etc finished even and smooth for laying WPT without using extra cement complete all as specified and directed.
M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed
M&L for five layered APP modified polymeric water proofing membrane , 3mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3.60 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm outer dia on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 22mm outer dia on walls/ceiling or laying in floors or fixing to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.
S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.
Supply and fixing in CP brass shower rose (4'' overhead ABS) with 225mm CP brass arm and flange complete all as specified. Make :- Prayag Cat No. BOS-87
Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed
Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n.exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed
Taking down shutters of any description n.exc 1 sqm each leaf and removing from site complete all as specified and directed
Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.
Shree Sai Ram Enterprises
MITTAL ENTERPRISES
JWALA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .