138WE/L-173/2025-26

Amount

Taking down cement plaster on brick/PCC block or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and/or directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded aggregate) as plinth protection finished even and smooth with out using extra cement, complete all as specified and/or as directed by Engr-in-Charge.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and/or as directed by Engr-in-Charge.

M&L for PCC 1:4:8, type D2 (using 40mm graded crushed aggregate) as in mass concrete and filling of foundation, complete all as specified and/or as directed by Engr-in-Charge.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundations beams : plinth beams: bases for column, etc 'basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) in Beams , Cantilievers, bressummers, lintles over 1.5 m span complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in slab supported on walls, beam, and columns in floors, roofs landings, balconies etc. complete all as specified and directed.

M&L for Cement concrete 1:4:8, type D-2, (using 40mm graded stone aggreate) 100 mm thick as in sub -floors, sub- bases, floors and pavings, etc. complete all as specified and/or as directed by Engr-in-Charge.

M&L for Cement concrete 1:3:6, type C-2, (using 40mm graded stone aggreate) 100 mm thick as in floor hard standing finished even and smooth without using extra cement complete all as specified and/or as directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and/or as directed by Engr-in-Charge.

M&L for mild steel TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and/or as directed by Engr-in-Charge.

M&L for mild steel TMT bars, 5mm dia and over upto including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for hardcore of broken stone gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface, complete all as specified and/or as directed by Engr-in-Charge.

Preparation of new/ previous untreated steel surface of any description over 10cm grith or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L precast solid blocks in cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in block masonry, exc.10cm in width and set in cement mortar 1:4, complete all as specified and/or directed by Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of block/ brick wall works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and/or directed by Engr-in-Charge.

M&L for 5 mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and/or directed by Engr-in-Charge.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and/or as directed by Engr-in-Charge.

S&F 30mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and/or as directed by Engr-in-Charge.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and/or as directed by the Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick Glazed and Skelton shutter, open and prepared to receive the glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., complete all as specified and/or as directed by Engr-in-Charge. Note : Glass / Wiremesh be measured seperately.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, supply and fixed to chowkats, complete all as directed by Engr-in-charge.

M&L for preparation of new or untreated wood or wooden based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and/or as directed by Engr-in-Charge.

M&L sheet glass 4.8mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and/or as directed by Engr-in-Charge.

M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and/or as directed by Engr-in-Charge.

S&F100mm long mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 75mm long mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and/or as directed by Engr-in-Charge.

S&F floor door stopper (length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and/or as directed by Engr-in-Charge.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and/or as directed by Engr-in-Charge.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L glazed (coloured) ceramic tiles of size (350 x 250mm) x 7 mm / (450mm x 350mm) x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles all as specified and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F rotational moulded HDPE water storage tanks 1000 ltrs capacity and inner and out white two layers ISI marked ( cylindrical vertical type/rectangular loft type closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and taking down the existing ones, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge

S&F Gypsum board 9 mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge

M&L for preparation of old treated surfaces of walls or brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescent salts treating oil and greasy spots etc. and applying two coats of oil bound distemper complete all as specified and directed

M&L preparing newly plastered wall surfaces and applying two coats of distemper oil emulsion including priming plastered surfaces with alkali resistant priming paint, complete all as specified and as directed.

M&L for preperation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

S&F vitreous china urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60 mm brass screws, pointing around urinal back in cement, fixing grating and union for discharge pipe excluding flushing cistern, flush pipe but including CP waste coupling, PTMT urinal spreader, etc. complete all as specified and as directed by the Engr-in-Charge. Make:- Cera/Jaquar/Hindware

S&F in repair vanity washbasin cabinet size 800 x 460 complete with all acessories fixed complete all as specified and directed by Engr-in-charge. Make Cera/hindware/Jaquar

S&F in repair curved shape urinal partition with frosted glass of 8-10mm thick (chamfer) of size 900 x 450 mm fixed wall including all acessories completed all as specified and directed by Engr-in-Charge. Make:-Jaquar Cat Part No JSE-CHR-810UC450X or equivalent in Hindware/Cera.

S&F water closet white vitreous china ware Orissa pattern of size 580 x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm bore front or back inlet incl provision of PCC bedding type B1, 1:2:4 (using 20 mm graded aggregate) and connection pipes (excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated), complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair fancy type glass corner self with CP brackets etc, complete all as specified and directed. Make:- Jaquar or equivalent approved make as approved by GE.

S&F in repairs CP soap dish, any type, fixed to plugs with chromium plated brass screws completed all as specified and directed.

S&F towel rod brass CP 60 cm long between flanges and including all accessories like brackets/ screws etc as recommended by manufacturer and complete fixed in position complete all as specified and/or directed by Engr-in-Charge.

S&F grating doom 125mm dia with waste hole of PTMT (min weight 40gms) complete all as specified and/or directed by Engr-in-Charge.

S&F in repairs grating doom 150mm dia of CP, complete all as specified and/or directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

M&L PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in hold fast, bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F chromium plated toilet roll holder with flap and fittings complete all as specified and/or as directed by the Engineer-in-Charge.

S&F in repair One Piece EWC with built in Cistern Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and mild steel chromium plated hinging device complete with flushing cistern. Make: Jaquar One Piece-WC with Uf Soft Close Slim Lys-White-38851S220SMN or equivalent make as approved by GE

Supply only flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless symphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. incl all necessary accessories like rag bolts/ gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and/or directed by Engr-in-Charge.

S&F 25mm bore stop cock chromium plated screw down and high pressure screwed both ends for iron pipe or brass ferrule.

S&F in PVC (SWR) 75 mm bore, single socketed in any length with rubber ring joints using solvent as per manufacture instruction, fixed with wall and jointed complete all as specified and/or directed by Engr-in-Charge.

S&F PVC reducer of 110mm dia, complete all as specified and directed by Engr-in-Charge.

S&F PVC reducer of 75mm dia, complete all as specified and directed by Engr-in-Charge.

S&F 125/110 mm dia bore PVC (SWR) 'S' trap, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bend any radius, complete all as specified and as directed.

S&F PVC (SWR) single junction (Single T) of 75 mm dia, complete all as specified and/or as directed by Engr-in-Charge.

Taking up or down 25 mm to 32mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and/or directed by Engr-in-Charge.

S&F 25mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engr-in-Charge.

S&F 32mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engr-in-Charge.

S&F in repairs fancy type 15 mm bore chromium plated bib taps, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends, complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, wells cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc. 1.5m in depth in hard/dense of soil and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed by Engr in Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam, beam haunchings, girders, bresum-mers, lintles, cantilevers, shelves including supports, overhanging, etc. also splays between floors and beams, etc, complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and/ or as directed by Engr-In-Charge.

M&L form work for rough finished concrete surfaces to sides of square,rectangular or polygonal pillars, posts, struts, piers, columns ans stanchions, complete all as specified and/ or as directed by Engr-In-Charge.

M&L for form work to soffits of suspended slabs flat type such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or slopping etc. complete all as specified and/or as directed by Engr-in-Charge.

M&L for form work to edges of concrete flats in floors openings in concrete walls floor and roof and sides of RCC/PCC bands in walls horizontal or sloping and similar work not exc 20 cm wide, complete all as specified and/or as directed by Engr-in-Charge.

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket and power point) including complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specified and/or as directed by Engr-in-Charge.

Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead complete all as specified and/or directed by Engr-in-Charge for the followings:-

One light/exhaust fan point controlled by one way switch.

One switch socket outlet 6 Amps, 230 volts point on same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

All as per Srl item No 85 above, but using cables 4 Sq mm size.

S&F switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and/or directed by Engr-in-Charge.

S&F socket outlet two in one, 3 pin 6 Amps flush type.230 volts complete all as specified and/or directed by Engr-in-Charge.

S&F switch Socket combination outlet multi purpose 3 pin 6 Amps and 16 Amps 230 volts complete all as specified and/or directed by Engr-in-Charge.

Supply and fix lamp holder insulated body with back plate complete all as specified and directed.

S&F ceiling rose, surface Bakelite three terminals complete all as specified and/or directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 08 Ways with 200 Amps rated bus bar complete all as specified and/or directed by Engr-in-Charge.

S&F MCB SPN 63 Amp 240 Volts, 10 KA, 'C' Curve AC ISI marked complete all as specified and/or directed by Engr-in-Charge.

S&F MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and/or directed by Engr-in-Charge.

Supply and fix in replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and/or directed by Engr-in-Charge. Make-Havells /Crompton/ Bajaj.

Supply and fix LED lamp 09 watt 220 V AC complete all as specified and directed .

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and/or directed by Engr-in-Charge.

S&F in replacement of Air circulator steel body AC single Phase 230V of size 300mm sweep with Electric driver, blades, and frame and louvers as required on site, complete all as specified and directed. Note:-Old retrieved fans to be deposited with MES store yard

Supply and laying in replacement of XLPE insulated, aroured, heavy duty electric cables, with stranded aluminium copper conductor rating 1100 volts grading of size 16 sqmm 2 core laid in trenches or passing through pipes, ducts or fixed to walls / poles, complete all as specified and/or directed by Engr-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, wells cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth in hard/dense soil and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed by Engr in Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed.

Supply and fix in replacement LED street light fitting 60 Watt 230 Volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and/or directed by Engineer-in-Charge.

Supply, connecting and testing Portable Hot water vessel 15 Itr capacity, thermally insulated, heavy duty Stainless steel body, 1500 watt, AC, 230V, with provision of tap complete all as specified and/or directed by Engineer-in-Charge.

S&F GI Bracket made out of 32/40mm dia medium grade pipe 1.2m length bend to shape to 120 degrees for fixing on pole and suitable for 35 Watt stret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint over a coat of primer complete all as specified and/or directed by Engr-in-Charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including 4 mm dia GI wire as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 3 of MES SSR Part I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and/or as directed by Engr-in-Charge.

Mehar Enterprises (BID ID -3443121)

M/s Koul & Sons (BID ID -3443477)