GE 874/EWS-14/2021-22

Amount

E/M Portion

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Point wiring for one light/fan/bell /5amp socket outlet same board/5amp socket outlet independant board point, controlled by one, one way switch (with switch included) with 1.5 sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor ( FR) cable drawn into & including midium grade casing caping/PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed/ surface (including chase cutting in brick/stone masonry walls for fixing conduit/ casing caping and plastering the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, socket Supply and Fixing fan regulators etc with 3mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 sqmm solid copper conductor cable earth wire and connected to earth dolly complete all as specified and directed, are as follows make of cable Havells, Rallison, HPL , RPG.

All as per item No. 2 here in before but for One socket outlet 5 pins 5 amps (including socket and switch) controlled by one switch on same board.

All as per item No. 2 here in before but for One socket outlet 5 pins 16 amps (including socket and switch) controlled by one switch on independent board.

All as per item No. 2 here in before but wiring with 2.5 sqmm copper wire (FR) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

Supply and Fixing of switch piano flush button single pole, one way/ two way (as required), 5 amps complete all as specified and directed. Make - Anchor/SSK/Cona Havells.

Supply only socket outlet multi 5 pins 5 amp, complete all as specified and directed. Make - Anchor/SSK/Cona Havells.

Supply only switch socket combination 2 in 1, 5A flush type.

Supply only of switch piano flush button single pole, one way 15amps complete all as specified and directed. Make - Anchor/Plaza/Cona.

Supply only of socket outlet 2 in 1, 6 pins 15 amp, complete all as specified and directed. Make - Anchor/SSK/Cona Havells

Supply only of switch socket combination 3 pin 16A, flush type .

Supply and Fixing of ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. Make - Anchor/SSK/Cona Havells

Supply and Fixing stepped type electronic fan regulator 1 module in white colour. Make : Anchor/Cona/SSK.

Supply and Fixing of lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. Make - Anchor/SSK/Cona Havells.

Supply and Fixing of sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way incl blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete, including fixing of MCBs provided by MES, all as specified and directed. Make : Legrand, Havells/HPL.

Supply and Fixing of sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete, including fixing of MCBs provided by MES, all as specified and directed. Make : Leggrand/Havells/HPL.

Material and Labour for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FR) ISI marked drawn into & including medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC conduit complete all as specified and directed. This item includes removal of old Sub Main wiring from the location and deposition in MES store.

Material and Labour for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FR) ISI marked drawn into & including medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC conduit complete all as specified and directed. This item includes removal of old Sub Main wiring from the location and deposition in MES store.

Material and Labour for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FR) ISI marked drawn into & including medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC conduit complete all as specified and directed. This item includes removal of old Sub Main wiring from the location and deposition in MES store.

Supply only LED Tube Light 2 Feet, 10 Watts, Integrated batten T8 type, warm/ cool white (as required by MES/ User), indoor decorative aluminium extruded complete with two nos of PVC box of size 75x75x20mm for mounting light fittings, 3 terminal/ PVC/ polycarbonate, isolated body. Make of light fitting - Phillips/C & S/Wipro.

Supply only of RCBO (as directed) four pole 16 to 100 Amps (as required at site by MES) 415 Volts, 16 KA complete all as specified and directed. (If supply only is required, the stores may be handed over to MES) Make: Havels /Legrand/ L&T.

Supply and Fixing, Kerosene/ Diesel Run Space Heater, of Heat output of minimum of 60,000 BTU/hr, completely electrically operated with temperature control, with 1 year warranty (all inclusive), completely all as specified and directed. Make : Paseco (PRT-60) or equivalent as approved by engineer in charge.

Repair and Maintenance (including any spare parts) of, Kerosene/ Diesel Run Space Heater, with complete (all inclusive) 1 year warranty after maintenance, completely all as specified and directed. Make : Paseco/ Master or equivalent as approved by engineer in charge. This is to be treated as an AMC of 1 year. Note : The repair has to be conducted and heater brought back to site within 5 days of intimation by MES through phone call/ whatsapp (for this purpose a whatsapp number is to be provided by MES which is to work at all times). Any delay beyond this will incur a fine of Rs. 350 per day to the contractor limited to a maximum of Rs. 50000.

Supply and Fixing, Kerosene/ Diesel Run Space Heater, of Heat output of minimum of 155,000 BTU/hr, completely electrically operated with temperature control, with 1 year warranty (all inclusive), completely all as specified and directed. Make : Master (B-155) or equivalent as approved by engineer in charge

Supply and Fixing, Kerosene/ Diesel Run Space Heater, of Heat output of minimum of 12,000 BTU/hr, completely electrically operated with temperature and time controls, with 1 year warranty (all inclusive), completely all as specified and directed. Make : Toyotomi or equivalent as approved by engineer in charge

Supply and Fixing, Ceramic Cabinet LPG Gas (and electric) Run Space Heater, with built in start electric piezo ignitor, with 2 in 1 option to run both on gas as well as on electricity, of Heat output of minimum of 18,000 BTU/hr, with 1 year warranty (all inclusive), completely all as specified and directed. Make : Sunflame or equivalent as approved by engineer in charge.

Supply and Fixing, 600 VA Desktop UPS with power back up of atleast 20 minutes when at full load, complete, with a minimum warranty of 2 years (to be executed through contractor), all as specified and directed by engineer in charge. Make : Exide/ Luminous/ Microtek/ Intex.

Supply and Fixing, LPG Gas Water Heater, of 6 litre minimum capacity, with dry heat and overheat protection, timer protection, flame failure settings, with atleast 2 year warranty (all inclusive), completely all as specified and directed. Make : Bajaj/ V Guard or as approved by engineer in charge.

Supply and Fixing Air Purifier, with HEPA Filter, of make MI model No 2S.

Supply and Fixing Voltage Protection Circuit, single phase, with variable voltage settings and digital display, of make of Selec.

Supply and Fixing Voltage Protection Circuit, three phase, with variable voltage settings and digital display, of make of Selec.

Supply and Fixing 1 kVA Inverter (with atleast a power factor of 0.8 and above), sine wave type, with connection to battery and main lines, online type, requiring only one 12V battery, complete, all as specified, directed and clarified by Engineer in charge of make of Exide/ Luminous/ Microtek.

Supply and Fixing 2 kVA Inverter (with atleast a power factor of 0.8 and above), sine wave type, with connection to battery and main lines, online type, requiring only a maximum of two 12V batteries, complete, all as specified, directed and clarified by Engineer in charge of make of Exide/ Luminous/ Microtek.

Supply and Fixing 5 kVA (4000 W and above) Mainline Stabiliser, with input voltage range of 90 to 300 V, Output stabilised at 220V, with inbuilt safety MCBs, including connection to main lines (input and output, complete, all as specified, directed and clarified by Engineer in charge of make of Aulten/ V Guard or as approved by Engineer in Charge.

Supply and Fixing 12V, 150 AH Long Tubular Type Lead Acid Battery of make of Exide/ Luminous/ AMCO with minimum all inclusive warranty of 36 months from the date of fixing of the batteries.

Taking down old unserviceable Bulk Head and Supply and Fixing LED Bulk Head, 6 Watts IP55 in engineering plastic housing with clear prismatic diffuser, including replacment of old US ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body. Make of light fitting - Phillips/C & S/Wipro. Make of ceiling rose : Leader/ Cona/Anchor.

Supply and fixing recess mounting luminaire with high brightness LEDs as light source, 36W (2x2ft Panel Light) suitable for Armstrong/Grid ceiling complete all as specified. Make : Havells.

Supply only of new heating element with capacity of 1500 Watts (Cup/triangle type) for 25 Ltr geyser.

Supply only of new heating elemant with capacity of 2000 Watts (Cup/ triangle type) for 25 and 50 Ltr geysers.

Supply only of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Supply only modular switches, 1 way 6A, 1 module complete all as specified.

Supply only modular switches, 1 way 16A, 1 module complete all as specified.

Supply only modular Bell push switch, 6A, 1 module complete all as specified.

Supply only modular socket 6A, 2/3 pin combined 2 module complete all as specified.

Supply only modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified.

Supply only modular patterned plate with frame, 1 module complete all as specified.

Supply only modular patterned plate with frame, 2 module complete all as specified.

Supply only of modular patterned plate with frame, 8 module complete all as specified.

Supply only of modular switch socket combination 3 pin 5 Amp flush type complete all as specified and directed.

Supply only of modular switch socket combination multipurpose 3 pin 15 Amp and 1 pin 5 Amp controlled by one switch complete all as specified and directed.

Supply only self Adhesive electrical insulation tape (of five different colours) of size 2.5cm x 25m x 0.125mm, ISI marked. Make : Steelgrip/Kinjal/SSK/ 3M

Supply only ceiling rose, with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body. Make:Anchor/Cona/SSK.

Supply only Exhaust Fan, with Plastic Body, White Colour, 150 mm, complete with all accessories such as nuts, screws, bolts, wirings, etc.

Supply only of PVC Conduits of 20mm width, of make following ISI standards duly approved by Engineer in charge.

Supply only of PVC Casing Capping of 25mm width, of make following ISI standards duly approved by Engineer in charge.

Supply only of Bedroom Lamp, with glass head and brass base, enamelled finish, design as approved by engineer in charge, outdoor type, with LED Bulb, B22 Pin type, 5 or 6 W, Warm/ Cool White (as required at site), complete with all accessories, to include necessary nuts, screws, bolts, wirings, etc.

Supply only of Bathroom Mirror Lamp, with glass head and brass base, enamelled finish, design as approved by engineer in charge, outdoor type, with suitable LED Bulb/ Light, B22/ T5 type, 9 or 10 W, Warm/ Cool White (as required at site), complete with all accessories, to include necessary nuts, screws, bolts, wirings, etc.

Supply only of Garden Lamp Post, with atleast 90 cm tall metallic stem, with glass head and metallic base, enamelled finish, design as approved by engineer in charge, outdoor type, with suitable LED Bulb/ Light, B22/ T5 type, 5 or 6 W, Warm/ Cool White (as required at site), complete with all accessories, to include necessary nuts, screws, bolts, wirings, etc.

Supply only of Outdoor Wall Lamp, with glass-metal head and metallic base, black/enamelled finish, design as approved by engineer in charge, outdoor type, with suitable LED Bulb/ Light, B22/ T5 type, 5 or 6 W, Warm/ Cool White (as required at site), complete with all accessories, to include necessary nuts, screws, bolts, wirings, etc.

Supply only of LED Bulk Head, with two output wires, 9 or 10W, Warm/ Cool White (as required at site), of make of Havells/ Bajaj/ Syska or as approved by Engineer in charge.

Supply only lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. Make Anchor/Cona/SSK.

Supply only LED lamp 50 W, B22 Pin Holder type, with necessary heat sink, of Make : Havells/ Crompton/ Philips/ Crompton greaves/ Bajaj.

Supply only LED lamp energy saving 9 or 10 W LED lamp of colour as required by MES/ User of Make Havells, Crompton greaves, Bajaj, Phillips, Crompton Greaves.

Supply only 1.5 Sqmm single Core HRFR PVC Insulated Industrial Grade Copper Conductor Cables, 1100 Volt Conforming to IS 694 complete all as specified and directed.

Supply only 2.5 Sqmm single Core HRFR PVC Insulated Industrial Grade Copper Conductor Cables, 1100 Volt Conforming to IS 694 complete all as specified and directed.

Supply only 4 Sqmm single Core HRFR PVC Insulated Industrial Grade Copper Conductor Cables, 1100 Volt Conforming to IS 694 complete all as specified and directed.

Supply only 6 Sqmm single Core HRFR PVC Insulated Industrial Grade Copper Conductor Cables, 1100 Volt Conforming to IS 694 complete all as specified and directed.

Supply only common commercial salt, for earthing refilling.

Supply only Charcoal Dust/ Breeze (size and type as mentioned by engineer in charge), for earthing refilling

Supplying Only of 1100 volts grade heavy duty PVC Sheathed FLAT twin core cable of size 16 Sqmm, PVC insulated, aluminium multi-stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed by engineer in charge of make of Havells/ Polycab/ Finolex/ KEI.

Supply only Distilled water for refilling of battery, packaged in 1 litre bottles.

Supply only Cable Jointing Kit for 11KV (Earthed) grade cable for indoor termination heat shrink type point complete with jointing material and accessories suitable for 3 core, 16Sqmm to 35 Sqmm, XLPE Armoured alluminium conductor cable of size.

Supply only Cable Jointing Kit for 11KV (Earthed) grade cable for indoor termination heat shrink type point complete with jointing material and accessories suitable for 3 core, 50Sqmm to 95 Sqmm, XLPE Armoured alluminium conductor cable of size.

Supply only Cable Jointing Kit for 11KV (Earthed) grade cable for indoor termination heat shrink type point complete with jointing material and accessories suitable for 3 core, 120Sqmm to 185 Sqmm, XLPE Armoured alluminium conductor cable of size.

Supply Only of Heat Shrink Tube Kit (80 meters Kit), of "Polyolefin" material, consisting of 8 meters of each of 1mm, 1.5mm, 2mm, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm and 10mm diameters, totalling 80 meters, of 2:1 shrink ratio.

Supply Only of Heat Shrink Tube, of "Polyolefin" material, of diameter of 10 mm of 2:1 shrink ratio.

Supply Only of Heat Shrink Tube, of "Polyolefin" material, of diameter of 12 mm of 2:1 shrink ratio.

Supply Only of Heat Shrink Tube, of "Polyolefin" material, of diameter of 15 mm of 2:1 shrink ratio.

Supply Only of Heat Shrink Tube, of "Polyolefin" material, of diameter of 20 mm of 2:1 shrink ratio.

Supply Only of Heat Shrink Tube, of "Polyolefin" material, of diameter of 15 mm of 2:1 shrink ratio.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-55 (11.0 metres long) including drilling of holes of reqd size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally & portion embedded in concrete, making five black & red bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height all as specified and directed.

Supply only of street light housing made of metallic top and Plastic/Plexiglass/FRP bottom (which is to be transparent), complete with one B22 holder, suitable heat sink, three phase 2.5 sq mm cable and street light fixture/ holder, all in Brand New condition or Renovated condition (in case of old housing renovated, the housing is to be painted with 0.2 mm coating of paint and not visible cracks or dents to be seen). The housing is to be IP65 Rated (the same shall be tested). The item should be capable of housing Wipro 50 Watt Bulb (N50201) and Phillips Stellar 50 Watt LED Bulb (929001812013). Note : LED Bulb is not included in the schedule.

Supply only of street tube light housing made of metallic top and Plastic/Plexiglass/FRP bottom (which is to be transparent), complete with three phase 2.5 sq mm cable, suitable heat sink and street light fixture/ holder, in Brand New condition or Renovated condition (in case of old housing renovated, the housing is to be painted with 0.2 mm coating of paint and not visible cracks or dents to be seen). The housing is to be IP65 Rated (the same shall be tested). The item should be capable of housing upto 03 numbers of 4 feet long LED tube lights stacked parallely (total lenght being kept at 4 feet), with the plastic clips preinstalled for the LED tube light fixing. Note : LED Tube Light is not included in the schedule.

Supply only of LT XLPE and PVC insulated armoured aluminium conductor cable 1100 volt grade conforming to IS-1554 of sizes of 50 Sqmm 3.5 Core.

Supply only of 50 W LED bulb, B22 pin base, with necessary heat sink, of make of wipro/ havells/ phillips/ crompton, with minimum all included replacement warranty of two years.

Supply only Aluminium Conductor Steel Reinforced, any size, all as specified, directed and clarified by engineer in charge.

Supply only of Disc type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 volt grade all as specified.

Supply only of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 volt grade all as specified.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of ser item No. 93 above but 20mm.

All as per description of ser item No. 93 above but 25mm.

All as per description of ser item No. 93 above but 40mm.

All as per description of ser item No. 93 above but 50mm.

All as per description of ser item No. 93 above but 80mm.

S&F GI water tubing 15mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

All as per description of ser item No. 99 above but 20mm.

All as per description of ser item No. 99 above but 25mm.

All as per description of ser item No. 99 above but 40mm.

All as per description of ser item No. 99 above but 50mm.

All as per description of ser item No. 99 above but 80mm.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litre storage capacity, hoisted and fixed in position all as specified in SSR Part I of makes approved by MES channels.

S&F electric run water motor pump, centrifugal type, 2 HP, 60 meter head, complete with base, cover and all electrical and plumbing acessories, all as specified and directed by engineer in charge.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 15mm complete all as specified and directed by Engr-in-Charge.

All as per description of ser item No. 107 above but 20mm.

All as per description of ser item No. 107 above but 25mm.

All as per description of ser item No. 107 above but 40mm.

Supply Only of Insulation Lagging material (to pipes used in water supply), 40 mm thick, nitrile foam or equivalent material, internal diameter of 20 mm to 40 mm (as required), with 400 mm wide Aluminium sheet metal of thickness as as mentioned in IS 9842 and three 400 mm nylon cable ties per Running meter.

Supply only of 400 mm wide Aluminium sheet metal of thickness as as mentioned in IS 9842.

Supply only of 450 mm Nylon Cable ties.

Supply only GI Union 15 mm dia complete all as specified and directed by the Engr-in-charge.

Supply only GI Union 20 mm dia complete all as specified and directed by the Engr-in-charge.

Supply only of sanitary GI fitting 15 mm dia such as elbow,socket ,nipple ,plug, etc) complete all as specified and directed by the Engr-in-charge.

Supply only of sanitary GI fitting 20 mm dia such as elbow ,socket ,nipple ,plug, etc) complete all as specified and directed by the Engr-in-charge.

patriotic builders

RATHER BROTHERS

Bidder Name

patriotic builders

RATHER BROTHERS

M/S BEE AAY CONSTRUCTIONS