Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-Finance | L1 | Accepted-Finance Ist Lowest Bidder | |
| 2 | L2₹31.8 L+₹3.3 L (11.7%)Accepted-Finance | L2 | Accepted-Finance 2nd Lowest Bidder | |
| 3 | L3₹34.1 L+₹5.7 L (20.1%)Accepted-Finance | L3 | Accepted-Finance 3rd Lowest Bidder | |
| 4 | L4₹34.6 L+₹6.2 L (21.8%)Accepted-Finance | L4 | Accepted-Finance 4th Lowest Bidder | |
| 5 | L5₹39.4 L+₹11.0 L (38.7%)Accepted-Finance | L5 | Accepted-Finance 5th Lowest Bidder |
Tender Value
₹51.7 L
EMD Value
₹1.0 L
Closing Date
27 Mar 2026, 3:00 pmClosed
Executive Engineer
office of Executive Engineer, East Road (M-212), PWD, Under Akshardharm Flyover, Delhi.-91
Providing and Placing Jersey barrier at Narwana Link Road-1, 2 and 3 along with major drain along with NH-24 and on U.P. Link Road along with Shahdara Drain near Mayur Vihar Flyover under Sub-Division East Road-IV of Division East Road/(M-212) during
2026_PWD_288950_1
42/EE/East Road (M-212)/PWD/2025-26
Open Tender
Civil Works - Roads
Works
30 days
East Road-IV
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹1.0 L
28 Mar 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||||
| 1.01 | Two or more coats on new work | - | Sqm | - | - |
| 2Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. | |||||
| 2.01 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | - | Sqm | - | - |
| 3Add @ 3.00% Cost Index on DSR 2023 | |||||
| 4Modified Estimated Cost due to correction in GST Rate @ 0.973 =(Estimated cost based on DSR 2023 items *0.973) = (-) (343754*0.027= 9281) | |||||
| 5Providing & Fixing of Precast RCC jersey barrier of size 3000 (length) x840 (height)x610 (bottom width) top width x 150 mm manufactured by approved agency using M-30 grade concrete and reinforcement with 8 mm dia TMT steel @ 150mm c/c both ways, having two holes of 50mm dia at appropriate location lined with mild steel pipe. The each barrier will be supplied with 1 number 25 mm dia x 810 mm length or steel for placing in the hole created for this purpose. The each barrier will be supplied with 1 number 25 mm dia X810 mm length for steel for placing in the hole hooks creted by rope hooks when two barriers are placed side by side so that at the time of hitting the moving traffic vehicle all the barriers will act in unison and thus prevent movement towards the opposite lane. In addition the barriers will be placed on a layer epoxy adhesive placed on concrete road throughout the length and width on either side of barrier for the purpose of resisting movement of jersey barrier an and when they are hit by moving traffic. The barriers will be so placed along. | |||||
| 6Providing and Fixing of Flexible Median Markers which shall be made of combination of tough, high impact resistant molded thermoplastic body along with florescent yellow color retro-reflective type XI sheeting with minimum exposed reflective area 285 square mm and with rebound property. The reflective sheeting should confirm to Type XI Florescent Yellow sheeting as per IRC 67 2012 and ASTM D4956-11. The flexible median marker shall have overall height of minimum 180 mm, body thickness of minimum 2mm and shank depth of minimum 30mm. The retro-reflective sheeting shall be on both sides of the Flexible Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The edge of sheeting should not come out easily by putting nails, sharp objects etc. The logo of the manufacturer shall be embossed on either side of the body. The plastics used for the molding the flexible median marker shall have a minimum notched Izod Impact strength value of 4.11J/cm (@thickness 3.17mm) at room temperature, tested in accordance with ASTM D256. The product design has to with stand all natural impacts and should not get damaged if any pedestrian stamp on top of it intentionally or unintentionally. The product should bend up to 90 degree on both sides without breakage or damage. The product shall be provided with 3 year outdoor weathering report as per ASTM & IRC Standards & 10 year warranty confirmation as per IRC 67:2012 standards for the reflective sheeting used in product. The product shall have accredition with IRC. | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.86 MB
BOQ_383465.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .