Construction of Community Hall at Debing in East Siang District

Amount

SH:- Civil Work

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Providing and laying in foundations and plinth cement concrete 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) excluding the cost of centering and shuttering.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :b) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars

Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Column, pillars, posts and struts etc.

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. b) 1 : 1.5 :3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a)1 :1.5 :3(1 cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. 50 mm thick

Class - B I Indian teak wood 25 mm wooden plankings tongued and grooved in flooring including fixing with screws complete.

Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand)

Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.

Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary aluminium butt hinges with necessary screws. a) 38 mm thick best available local wood, class - B I

Providing and fixing, fly proof galvanized MS wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm to windows and clerestory windows including 62 x 19 mm beading of best available local wood.

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size).

Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.

Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.

Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).

Welding by Electric plant

Providing and fixing Durashine Zinc-Aluminium alloy coated (Tata bluescope building product) sheet roofing fixed with necessaru fastner and lapping method as described by the manufacturer inclusive of cuttting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.

Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Roofing Sheets

Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.

Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. a) Best local approved quality wood.

Extra for making chamfered edges of beading.

Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Providing and fixing white vitreous china water closet squating pan (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litre high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) WC pan with white plastic seat and lid

Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality.

Providing and fixing Aluminium sliding door bolts anodised transperent or dyed to requred colour or shade with nuts and scrows etc complete. a) 300 x 16 mm

Providing and fixing Aluminium tower bolts anodised or transperent or dyed to requred colour or shade with necessary screws etc complete. a) 250 x 10 mm

Providing and fixing Aluminium handels anodised or transperent or dyed to requred colour or shade with necessary screws etc complete. a) 125 mm

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). b)15 mm nominal bore

Providing and fixing brass bib cock of approved quality. b)15 mm nominal bore

Providing and fixing brass stop cock of approved quality. a) 15 mm nominal bore

Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. c) 100 mm dia

Providing and fixing sand cast iron heel rest sanitary bend. c) 100 mm dia

Providing and fixing soft wood 'EVE' board 25 mm thick and 225 mm wide including painting two coats complete as directed.

SH:- Electrical Work

Proving 1.50 sqmm PVC insulated PVC single core copper conductor cable (91 meter per coil)

2.5 sqmm PVC insulated single core copper conductor cable

4 sqmm PVC insulated single core copper conductor cable

Providing black tape

5 Amp P/Type switch

Sunmica board 8" x 10"

5 Amp Socket with 5 Amp switch combined

PVC casing caping flat channel of size 1"

PVC (Elbow Tee & bent) 3/4" size

Screw 1-1/2"

CFL Bulb 20W

MCB D.B

T. P. & N main sqitch 100 AMP.

32 AMP single pole circuit breaker.

Fan clamp.

Celing Rose.

Hack saw blade ( 12 per packet ).

Earthing conduit wire 0.4 sqmm.

4' - 0", 40 w flouroscent light fitting with 40 w tube light.

A. C. Ceiling fan 1400 mm sweep complete with regulator etc as required.

Wiring for light Fan point/3 pin 5 amp/15 amp socket out let with 5 sqmm/2.5 sqmm/4 sqmm and 6 sqmm PVC copper/Al. wire i/c earthing and connection etc as required. The work is to be carried out by a qualified wire man ( job work only ).

M/s K.B Enterprises