Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.6 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹1.1 Cr+₹11.3 L (11.5%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹1.2 Cr+₹19.8 L (20.2%)Rejected-Finance OFFICE NO 2 GROUND FLOOR CO OP HSG SOCIETY SBS ROAD COLABA MARKET MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹1.2 Cr+₹21.1 L (21.4%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹1.3 Cr+₹34.6 L (35.2%)Rejected-Finance FLAT NO 302 BUILDING NO 3 SAI SUNITA APARTMENT PASAVALI KALYAN MUMBAI 421306 | MUMBAI | MUMBAI | MAHARASHTRA | 421306 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
20 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR AND RESTORATION OF RIS COMPLEX AND 81 DUS AND MISC B/R WKS AT NAVY NAGAR UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI
2023_MES_631371_1
8164/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Class B
Category a (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Navy Nagar
₹2.2 L
Yes
5 Mar 2024
6 Dec 2023
22 Jan 2024
6 Dec 2023
20 Jan 2024
8 Jan 2024
6 Dec 2023 - 26 Dec 2023
Amount
Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force(work shall be carried upto 15 storey height bldg) complete all as specified and directed by Engr-In- Charge.
Material & Labour for cleaning existing reinforcement with wire/rotary wire brush, making the surface free from loose material dirt etc, complete applying two coats of alkaline rust converting primer (i.e. rust remover) FEOVERT conforming to ASTM-B-117, on the rebars including cleaning the reinforcement , wire brushing to remove loose rust spalls with time interval 6 hrs between the coats and applying protective coating (IPNET - RB)(work shall be carried upto 15 storey height bldg) complete all as specified and as directed by Engr-In- Charge.
Material & Labour for providing and applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in 1:1.5 proportion (1 part polymer and 1.5 parts Cement) on rebars after cleaning of rust scales as per manufacturers instruction (measurement on the basis of exposed concrete area)(work shall be carried upto 15 storey height bldg) complete all as specified and as directed by Engr-In- Charge.
Material & Labour for carrying out application of Bi Polar migratory corrosion inhabitor EPCO KP - 100 Protectssil CIT/Ferogard 903 on concrete surface (this inhabitor shall have migratory kind of property which permit the material to migrate to a vertical extent of 100 mm , through pores of concrete inhabbting the corroser and depassivating the electro chemical reaction it should have property to attack anode as well as cathode which is purely alkaline in nature (Ph 9.5) so it has no carcinogenic activities with concrete(work shall be carried upto 15 storey height bldg) complete all as specified and as directed by Engr-In- Charge.
Material & Labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete(work shall be carried upto 15 storey height bldg) complete all as specified and directed by Engr-In- Charge.
Material & Labour for Building up the profile of structrual members by using latex B2 modified air cured mortar system with forced application (guniting) in damaged areas (1 part cement 3 part sand with 20% epoxy latex based bond by wt of cement - 0.5 w/c ratio) in 20mm average thickness including leveling profiling etc.(work shall be carried upto 15 storey height bldg) Complete all as specified and directed by Engr-In- Charge.
Material & Labour for Building up the profile of structrual members by using latex B2 modified air cured mortar system with forced application (guniting) in damaged areas (1 part cement 3 part sand with 20% epoxy latex based bond by wt of cement - 0.5 w/c ratio) in upto 45mm average thickness including leveling profiling etc. It should be built up each layer not exceeding 20mm thickness with epoxy latex based bond coat before every layer(work shall be carried upto 15 storey height bldg) Complete all as specified and directed by Engr-In- Charge. (Note : Rate includes the rate of bond coat. No separate payment will be paid for bond coat).
Taking down cement or cement lime plaster on brick or stone walls, any description, including raking out joints, hacking for key, scrubbing down with water, etc (work shall be carried upto 15 storey height bldg) including disposal of debris out side the MoD land etc complete all as specified and directed by Engr-In- Charge.
Material & Labour for cement plaster 15 mm average thickness using factory manufactured pre mix/ready mix having minimum composition of C:S :: 1:4 and applied over brick masonry and concrete surfaces as final rendering, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. (work shall be carried upto 15 storey height bldg) complete all as specified and as directed by Engr-In- Charge.
Material & Labour for cement plaster 10 mm average thick using factory manufactured pre mix/ready mix having minimum composition of C:S :: 1:3 as in ceiling including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. (work shall be carried upto 15 storey height bldg) complete all as specified and as directed by Engr-In- Charge.
Complete removal of existing treatment on wall, ceiling, roof projections including facia, cornices etc by scrapping with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc and washing with water by skilled labour (work shall be carried upto 15 storey height bldg) complete all as specified and directed by Engr-In- Charge.
Material & labour for 3mm thick wall care putty on wall/ceiling in three coats, thickness of each coat n.exc 1.00mm thickness complete all as specified and directed by Engr-In- Charge.
Material & labour for Preparation of new plastered surfaces of walls and applying one coat of primer complete all as specified and directed by Engr-In- Charge.
Material & labour for applying one first coat oil emulsion distemper on surface of wall including prepration of surface complete all as specified and directed by Engr-In- Charge.
Material & labour for applying one second coat oil emulsion distemper over first coated distempered wall surface including prepration of surface complete all as specified and direceted.
Material & Labour for preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engr-In- Charge.
Material & Labour for preparing old previously treated wooden surfaces over 10 cm of width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-In- Charge.
Material & Labour for preparing of old steel surfaces of any description and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-In- Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed by Engr-In- Charge.
Material & labour for Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.09 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match complete all as specified and directed by Engr-In- Charge. (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate).
Material & Labour for coloured glazed ceramic tiles in vertical surface 300x450x7 to 8mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In- Charge.
Material & Labour for coloured joint free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In- Charge.
Ditto all as per item No 22 above but as in skirting over & including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In- Charge.
Demoliton of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded and pointed in any mortar including removing of debris outside MoD land complete all as specified and directed by Engr-In- Charge.
Material & Labour for machine cut pre-polished kota stone slab as in flooring, steps, window cill and jambs etc or similar work 20-25mm thick over and including 20 mm thick screed bed or bedding layer of CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-In- Charge. (Note : The rate includes the cost of cement screed bed)
Material & labour for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over and including bedding layer of 20mm thick using factory manufactured pre mix / ready mix mortar C:S :: 1:4 for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engr-in-Charge.
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-In- Charge.
Resecuring or easing and adjusting and finally refixing the shutters into the same opening after taking down wooden shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engr-In- Charge
Resecuring or easing and adjusting and finally refixing the shutters into the same opening after taking down wooden shutters n.exc 1 Sqm each complete all as specified and directed by Engr-In- Charge
Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each and complete all as specified and directed by Engr-In- Charge.
Taking down Shutters of any description n exc 1 Sqm each complete all as specified and directed by Engr-In- Charge.
Supply and fixing 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed by Engr-In- Charge.
Suppling and fixing 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engr-In- Charge.
Material & labour for 18-19mm thick Block boards, grade1 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frame-work including teak wood lipping, 6mm thick fixed with nails as in Cup board shutter and shelves complete all as specified and directed by Engr-In- Charge.
Supply and fixing 2nd class hard wood plain, solid straight chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-In- Charge.
Taking down chowkats or frame (w/o taking off shutters from the frames) but exc 1.50 but n.exc 4.00 Sqm each complete all as specified and directed by Engr-In- Charge.
Taking down chowkats or frame (w/o taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed by Engr-In- Charge.
Material & Labour for preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-In- Charge.
Supply and fixing mild steel holdfast, wall ties and similar articles confirming to Fe-290 Gde- E-165 complete all as specified and directed by Engr-In- Charge.
Material & labour for PCC (1:3:6) type C-1 (20mm graded crushed stone aggregate) for fixing of hold fast complete all as specified and directed by Engr-In- Charge.
Supply & fixing factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube, all as per specification and drawing upto 4 storey complete all as specified and directed by Engr-In- Charge.
Supply & fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap inserted for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing upto 4 storey complete all as specified and directed by Engr-In- Charge.
Supply and fixing 100mm size stainless steel butt hinges fixed with stainless steel screws complete all as specified and as directed by Engr-In- Charge.
Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section fixed with stainless steel screws complete all as specified and as directed by Engr-In- Charge.
Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type anodised fixed with SS screws complete all as specified and directed by Engr-In- Charge.
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm fixed with stainless steel screws complete all as specified and directed by Engr-In-Charge.
Supply and fixing Floor door stopper of 140mm aluminium alloy body and tongue with hard drawn steel spring fixed with SS screws complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repair for 20 mm curtain rod fancy type heavy steel chromium plated with brackets and knobs fixed complete all as specified and directed by Engr-In- Charge.
Supply & fixing Powder coated aluminium sliding windows for Three track with powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 64mmX45mmX1.55mm and 4mm thick glass shutter and wire mesh shutter of section 20mm X40mm X1.55mm and size of each shutter n.exc 0.60 Sqm including taking down old windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.
Supply and fixing aluminium anodised powder coated grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) complete all as specified and directed by Engr-in-Charge.
Supply and fixing 4.00 mm thick plain glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame/wooden frame including hacking out old one complete all as specified and directed by Engr-In- Charge.
Supply and fixing Aluminium alloy wire cloth, 0.35mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beading complete all as specified and directed by Engr-In- Charge.
Supply and fixing in repair Aluminium alloy wire cloth, 0.35mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beading complete all as specified and directed by Engr-In- Charge.
Supply and fixing in repairs stainless steel plate rack 0.63mm thick stainless steel sheet overall size stainless steel plate rack 31” x 31” x 10” kitchen rack all as specified and as direted by Engr-In- Charge.
S& F in repair Vitreous China Urinal, full stall type, white (including flushing cistern, flush pipe and waste pipe) including brackets including cutting, pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-In- Charge.
Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and as directed by Engr-In- Charge.
Supply and fixing in repair vitreous china white wash hand basin counter sunk size of 550x400mm including brackets including cutting, pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-In- Charge.
Supply & fixing in repair Sinks with drainage board made of stainless steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm.complete all as specified and as directed by Engr-In- Charge.
Supply & fixing in repair Sinks made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. complete all as specified and as directed by Engr-In- Charge.
Supply and fixing in repair vitreous china wash down water closet (EWC) (Pedestal) P or S trap including PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper complete all as specified and as directed by Engr-In- Charge.
Supply & fixing in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor.
Supply & fixing for chromium plated brass telephonic health faucet shower with flexible tube of stainless steel, 1.00 Mtr long with CP holder, multi flow 15mm dia for iron pipe or for brass ferrule etc complete all as specified and as directed by Engr-In- Charge.
Supply & fixing in repair lever operated 15 mm dia of 2-in-One chromium plated brass Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-In- Charge.
Supply & fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs complete all as specified and as directed by Engr-In- Charge.
Supply and fixing in repair CP brass swan neck type pillar tap of 15mm dia, screwed down high pressure fancy type 250mm long complete all as specified and directed by Engr-In- Charge
Supply and fixing in repair Fancy type Bib taps Chromium plated 15 mm bore surface fixing, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer In charge.
Supply & fixing in repair 15 mm stop valve cast copper alloy with fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer In charge.
Supply & fixing in repair 15 mm angle cock cast copper alloy with fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer In charge.
Supply & fixing in repair Sink waste coupling complete all as specified and directed by Engineer In charge.
Supply & fixing in repair 40mm dia PVC waste pipe of 900mm for drain of water from WHB and Sink complete all as specified and directed by Engineer In charge.
Supply and fixing in repair 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) including waste pipe complete all as specified and directed by Engr-In- Charge
Supply and fixing PVC connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engr-In- Charge
Demolition of lime concrete of any description and in any position not otherwise specifically provided for including china mozaic, WC etc. including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge.
Material and labour cement concrete 1:5:10 type E-2 with 40mm graded crushed stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge.
Supply and fixing 32mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm as in spout pipe each 50 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC (1:2:4) type B-1 making good the damaged portion by rendering in CM (1:4) and finishing the surface to match the existing surface complete all as specified and directed by Engr-In- Charge.
Treatment of sunken floor slab comprising of the following specifications and all as specified (i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chieselled out any mortar sticking to the surface and brooming / washing completely. 40 mm average thickness PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed. (ii) Rendering of uneven surfaces with 10 mm thick using factory manufactured pre mix / ready mix mortar addition and including WPC of UltraTech WP+ 200 or other equivalent @ 200ml per bag of mortar filling it with water and checking dampness and seepage. where dampness and seepage is noticed, nozzles shall be fixed and grouting shall becarried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty (iv) After drying putty washing the slab and sides of sunken portion with water and make it clean and clear (v) Material and labour for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky, coarse sand spray shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plastering the bottom and sides up to bottom of the skirting with minimum 20 mm thick using factory manufactured pre mix / ready mix mortar addition and including WPC of UltraTech WP+ 200 or other equivalent @ 200ml per bag of mortar including rounding of corners and junctions sloping towards spout. Note:Testing the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals. (vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:2:4 all around after painting with anticorrossive black japan paint
Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-In- Charge.
Material & labour brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-In- Charge.
Demolition of cement concrete un-reinforced in ground floor n. exc 15cm thick (below or above GL).(Note : Rates inluding removal of demolished material out side of MoD land ) complete all as specified and directed by Engr-In- Charge.
Material & labour PCC 1:2:4 type B-2 (40 mm graded crushed stone aggregate) in foudations,filling and mass concrete including necessary formwork, complete all as specified and directed by Engr-In- Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work complete all as specified and directed by Engr-In- Charge.
Supply & fixing mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-In- Charge.
Material and labour for Steel work in as in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed by Engineer-in-charge.
Material & labour for mild steel plate plain/ Chequered of required thickness over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150mm handle complete all as specified & directed by Engineer-in-charge.
Material & labour for mild steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, gate; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified & directed by Engineer-in-charge.
Supply & fixing for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.
Supply & fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified & directed by Engineer-in-charge.
Material & labour preparing old decorated surface of steel/wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint including necessary arrangement for working platform complete all as specified & directed by Engineer-in-charge.
Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge
Supply & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified & directed by Engineer-in-charge.
Supply & fixing Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws /fixed with L-type or screws J-type or cranked hook bolts complete all as specified & directed by Engineer-in-charge.
Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engr-In- Charge.
Material & labour for filleting in any position and to any shape of section area not exc 25 sq cm in cement sand mortar 1:4 including all mitred, stops etc complete all as specified and as directed by Engr-In- Charge.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by Engineer-in-charge.
Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 1.5 mm Flat iron incl all fittings like sockets, bend, junction, elbow etc. complete all as specified and directed by Engr-In- Charge.
Supply and fixing 110mm PVC (SWR) bends complete all as specified and as directed by Engr-In- Charge.
Supply and fixing PVC (SWR) branch piece, Single (single Y) equal or unequal for 110 mm bore access door eye. complete all as specified and directed by Engr-In- Charge.
Supply and fixing PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm bore access door eye. complete all as specified and directed by Engr-In- Charge.
Supply and fixing 110mm bore PVC floor trap with stainless steel gratings including jointing to waste pipe with solvent cement complete all as specified and directed by Engr-In- Charge.
Supply and fixing 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-In- Charge.
Supply and fixing PVC 160mm bore rain water pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 1.5 mm Flat iron including all fittings like sockets, bend, junction, elbow etc.complete all as specified and directed by Engr-In- Charge.
Supply and fixing 160mm PVC (SWR) bends complete all as specified and as directed by Engr-In- Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge.
Material & labour for suspended false ceilling system using chicago metallic (E grid) exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 4mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accoustic purpose to be placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repair 6 mm thick beveled edge best quality looking mirror of size 600 x 450 mm fixed with screws complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repair soap dish stainless steel and fixed with screw including wooden/plastic cleats complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repair towel rail CP 20 mm dia 750 mm long complete all as specified and directed by Engr-In- Charge.
Material & labour in repair stainless steel grating doom 125mm dia complete all as specified and directed by Engr-In- Charge.
Supply & fixing PVC loft tank (LDPE) of capacity 275 ltrs with complete fitting including 03 Nos adopter with washer for inlet/outlet,over flow as per manufacturer's instructions including brass float valve 15 mm complete all as specified and directed by Engineer-in-Charge
Taking down and refixing after cleaning of PVC loft tank (LDPE) of any capacity complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. including taking up/down u/s 15mm dia GI/20mm CPVC pipe and suitable working platform upto 12 storey of bldg complete all as specified and directed by Engr-In- Charge.
Supply & fixing CPVC 20mm bore Brass elbow complete all as specified and directed by Engr-In- Charge.
Supply & fixing CPVC 20mm Brass Tee complete all as specified and directed by Engr-In- Charge.
Supply & fixing CPVC 20mm MTA/ MBTA complete all as specified and directed by Engr-In- Charge.
Supply & fixing CPVC 20mm FTA/ FBTA complete all as specified and directed by Engr-In- Charge.
Supply & fixing CPVC 20mm Brass Elbow (3/4 X ½) complete all as specified and directed by Engr-In- Charge.
Taking down carefully copper/ aluminium point wiring i.e. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc to carry out B/R items on wall, ceiling and floors and refixing the same in existing position including provision of cadmium plated screws rawal plugs etc complete all as specified and as directed by Engineer-in-Charge.
ASHOK CONSTRUCTION
M/s. MAYUR ENTERPRISES
BOB ENTERPRISES
ORIENT ELECTRIC CO
satguruenterprises
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .