20/EUCC(XI)/(JZ)/2025-26

Amount

Safe loading & carriage including & proper stracking of following store material from ESC Lucknow /JE store to site of work .

33 KV 3x300 sq mm XLPE Cable

33 KV 3x300 sq mm XLPE St/Th J/Kit

33 KV 3x300 sq mm XLPE O/D J/Kit

ST Pole 11 Mtr Long (Galvanised Bottom)

11 KV Disc Insulator B&S Type 70 KN

Disc Fittings Dog/Racoon 70 KN B&S

33 KV Composit Pin Insulator

MS earthing rod 20x2500 mm

Steel Section

Stay Wire 7/8 SWG

Laying of 33 kV 3x300 sq. mm XLPE cable D/C including digging of trench 1050 mm deep, 750 mm wide along with required material Sand (0.195 Cub/Mtr), Ist class bricks (26.25 Nos/Mtr), stone pad (2.2 Nos size 600x750x50 mm). The inter axial spacing between two cable should be in between 0.32 M to 0.40 M. (As per JE instruction) and back filling the trench by soil (All the material required for laying will be supplied by the contractor except 33 kV XLPE cable)

33 kv3x300 Sq. Mm XLPE cable laying in MS/GI pipe 150mm dia single circuit (All the material shall be provided by the contractor except cable) as per resspo norms.

Hoisting of 33 kv 3x300 sq. mm XLPE Cable on D/P with GI Pipe dia 6" its jumpring complete with clamps , nuts and bolts .(All the material shall be provided by the contractor except33kv cables & O/D J/K. )as per RESSPO NORMS

Digging of pit of size 3x2x1 mtr. For making straight through joint 33KV work included filling of soil levelling and ramming of the same(ST/Th Providing by department )

Fabrication & erection of Section double pole for 33 KV line on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. top channel mm, bracing by MS Angle 65x65x6 mm, 8 No Stay Set , Danger Board, Barbed wire etc. (All material shall be provided by the contractor except ST Pole 11 Mtr Long, 11 KV Disc Insulator B&S Type 70 KN, 33 KV Composite Pin Insulator, M.S. Angle Iron 65x65x6mm for Bracing 2 no., Top Channel 125x65 sq. mm, Stay Wire 7/8 SWG, Disc Fittings Dog/Racoon 70 KN B&S, MS Earthing Rod 20x2500 mm)

Grouting of PCC/STP Pole in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per RESSPO norms.

Painting of Pole with one coat of red oxide & two coats of best quality top 2 mtr PO Red paint and remaining al. Paint (ISI mark) as per RESPO norms.

High pressure testing of 33kv 3x300 sq.mm.XLPE cable .Testing equipment will be arranged by the contractor

Painting of 33 kv feeder Name on the End type Double Pole/Cable Exposure/Section Double Pole/Cable stand etc as per instruction of site engineer

Scanning/Tracing of existing underneath power cables, water pipe line, gas pipe line, sewer pipe line on proposed route to avoid possibilities of any kind of damage during digging of trench/drilling for laying cable. (Scanning machine will be provided by the contractor)

Plotting of cable layout route & providing the map (i.e. depth Undernet and distance from either side of prominent reference fixed points). The reference must be not more intervals of 100 meter.(All material shall be provided by the contractor) as per norms.

All earthing strip shall be painted by green color (All Material Shall be arranged by the contractor)

Return of Balance material including Cable Drum from site to store, including handling, loading, unloading, and transportation as per project requirements

GST SHALL BE PAID EXTRA

Saraswati Electricals & Contractors (BID ID -5541782)