COMPREHENSIVE REPAIR TO BLDGS OF 6 JAKLI 12 ELINT SUP GP AND 155 INF BN TA UNDER GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubes complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubes complete all as specifed and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor of 75mm bore type 'B' complete including dismantling of old unserviceble PVC pipe all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius with access door, complete all as specifed and directed.

S&F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, laid in trenchs or in floor of 110 mm bore type 'B' complete including dismantling of old unserviceble PVC pipe all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius with access door, complete all as specifed and directed.

M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc, laid over & including 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed.

S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) and inlcuding set of CP jet with PVC pipe of superior quality, complete all as specified and directed.

S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe including trap set in concrete and removing debries from site, complete all as specified and directed.

S&F in repair for vitreous China full stall urinals, white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge piepe, complete all as specified and directed.

S&F in repair for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe with grating and union for discharge pipe including connecting to wate pipe, complete all as specified and directed.

S&F in repair for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm including 15mm bore pillar tap cast copper alloy, PVC connection 15mm length 450mm, low density PVC waste pipe, complete all as specified and directed.

S&F in repair viterous China pedestal wash basin, white flat back, including waste pipe CP pillar tap, waste chain and plug and porcealan stopper brackets, complete all as specified and directed.

All as per item No 14 here-in-before but counter top type, complete all as specifed and directed.

S&F in repair for 15mm bore brass chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to over head shower arrangement, complete all as specified and directed.

S&F in repair for 15 mm bore brass chromium plated wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.

S&F in repair 15mm CP brass health faucet (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.

S&F in repair for 15mm bore pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc, Complete all as specified and directed.

S&F in repair for PVC waste pipe 600/900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S&F in repair for PVC connection pipe 15mm dia for wash basin and flushing cistern with stainless steel nuts of length 600mm, complete all as specified and directed.

S&F in repair for 32mm dia waste coupling of brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and bedded in red lead cement mortar, complete all as specified and directed.

S&F in repair for viterous china toilet paper holder fixed to wall with CP brass screws, complete all as specified and directed.

S&F in repair for CP soap dish holder fixed with chromium plated brass screws, complete all as specified and directed.

S&F for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair for Glass conrner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specifed and directed.

S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm squre support pipes, dedicated holes for spoon, pegs etc cover all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.

S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, fixed with screws wooden / plastic cleats, complete all as specifed and directed.

S&F in repair for stainless steel towel ring. complete all as specified and directed.

S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair for 15mm bore Angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 15mm bia, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 20mm bia, complete all as specified and directed.

S&F for repairs premium multipurpose wall mounted storage cabinet with mirror of hard thermosetting plastic of size 600x 450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed.

S&F in repair CP grating with floor trap suitable for 75mm bore floor trap and jointing with white cement in square or circular shape and with provision of hole for waste pipe connection, complete all as specifed and directed.

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair for 15 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair for 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site including making good to disturbed portion, complete all as specified and directed.

Taking down shutters of any description area n. exc 1 sqm each and removing from site, complete all as specified and directed.

Labour only for repair to aluminium doors without taking down shutter or frame of any size any description including tightning, adjusting the shutter and handles refixing of glass, rubber beading or cleat and mortise lock etc, complete all as specified and directed.

Labour only for repair to aluminium doors by taking down shutter of any size any description including tightening adjusting the shutter and handles, refixing of glass, rubber beading or cleat and mortise lock and repairs to floor springs hinges by adjusting the screws, nails, nuts with gressing and fixing the same position etc, complete all as specified and directed.

S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium work for doors, windows & ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.

S&F for powder coated aluminium window and ventilator shutters of any colour, (minimum thickness of powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (3 Nos), suitable handle (2 Nos), aluminium tower bolt 150mm long, complete all as specified and directed. Note: Minium thickness of powder coating not less than 50 micron.

S&F for powder coated aluminium door with on or more shutters of any colour, (minimum thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including 5mm thick plain /coloured /frosted sheet glass or ACP sheet and stainless steel wire mesh and connected items such as necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges type B-21, 100mm long, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws, aluminium tower bolt etc, complete all as specified and directed. Note : Minium thickness of powder coating not less than 50 micron.

S&F for powder coated anodised aluminium three track sliding window with two or more shutters of any colour, (minimum thickness of powder coating not less than 50 micron), including 5mm thick plain /coloured /frosted sheet glass or ACP sheet and stainless steel wire mesh and connected items such as necessary joining cleats, glazing clips, rubber neoprene packing, handles, hinges type B-21, 100mm long, peg stay 150mm long, anodised aluminium snap beading, screws, aluminium tower bolt etc including making good to the disturbed portion, complete all as specified and directed. Note: Minium thickness of powder coating not less than 50 micron.

S&F for aluminium powder coated (powder coating not less than 50 micron) of any color fixed partition with frame of size 101.6 x 44.45 x 1.27mm thick and 101.6 x 44.45 x 1.20mm thick with total hieght up to 3.20m. The panels shall be made out of 5mm thick plain/ tinted (frosted) glass in top & bottom or ACP sheet including necessary jointing cleasts, glazing clips, rubber packing, powder coated aluminum snap beading screw etc including dismantling of existing partition of any type and making good to the disturbed portion etc, complete all as specified and directed.

S&F for pressed steel frame for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling and bed blocks for fixing hold fasts of chowkhats with PCC 1:3:6, type C-0 using 12.5mm graded stone aggregate, complete all as specified and directed.

S&F for pressed steel frame for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling and bed blocks for fixing hold fasts of chowkhats with PCC 1:3:6, type C-0 using 12.5mm graded stone aggregate, complete all as specified and directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with outer side glazing bars shutter and inner side wire mesh shuuter including glass panes, dovetailed or welded all as per IS-1038, including concrete bed blocks for fixing hold fast complete all as specified and directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars shutter and inner side wire mesh shuuter including glass panes, dovetailed or welded all as per IS-1038, including concrete bed blocks for fixing hold fast complete all as specified and directed.

M&L in repair for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed

S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled door shutters (any No of panels) with panels of timber flat on both sides (feather edges) or of veneered particles board medium density wood particle board with commercial face veneers, fixed to chowkat, complete all as specified and directed.

S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complet drilled for fixing of steel sheeting or othe r covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing conforming to Fe 410-W, Gde E-250 quality-A, complete all as specified and directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification, complete all as specified and directed.

M&L for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.

S&F in repair for door closer hydraulically regulated, aluminium (extruded section body) designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg (ISI Marked), Complete all as specified and directed.

S&F in repair for 100 mm size mortice lock of mild steel, vertical type, 4 levers (ISI Marked), complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed (ISI Marked), complete all as specified and directed.

M&L for aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, (ISI Marked), complete all as specified and directed.

S&F for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.

S&F for extruded aluminium anodised barrel tower bolt of size 150 mm long (ISI marked), complete all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.50 sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty / beads, complete all as specified and directed.

S& F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators , complete all as specified and directed.

S& F in repair for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators , complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wooden based surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified.

S&F in repair Stainless steel curtain rod 20mm dia (of approved colour and design), complete all as specified and directed.

S&F in repair for Curtain brackets with finials of stainless steel (as approved colour and design) including fixing to wall with MS full screws (including fixing of wooden piece of required size of walls), complete all as specifed and directed.

M&L for plain cement concrete 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in sub base to receive tiles, including demolition of old concrete of any type, complete all as specified and directed.

M&L for vitrified ceramic tiles double charged light shade or printed with highlighter tile (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n. exc 0.42sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling old unserviceable tiles, complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in dados/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tiles, complete all as specified and directed.

M&L for Machine cut kota stone slab (mirror polished) flooring 18-20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:3 including taking down old kota stone, complete all as specified and directed.

M&L for Machine cut kota stone slab (mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 including taking down old kota stone, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4, including dismantling old unserviceable of tiles, complete all as specified and as directed.

M&L for glazed ceramic coloured with high lighter tiles of size 450x350x7 mm thick, (premium quality highlighter basis) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling old unserviceable tiles, complete all as specified and as directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 , complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan and any radius in half brick thick wall, built in cement mortar 1:4 , complete all as specified and directed.

M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.

Description all as per item No 90.00 here-in-before but execpt stone, complete all as specifie and directed. Note : Stone retrieved from item No 87 will be re-used.

M&L for rendering 20 mm thick in cement mortar 1:4 on stone surface of wall at any hight finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surface or fair faces of brick surface on wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil emulsion distemper, complete all as specified and directed.

M&L for 3mm thick wall cae putty on wall surfaces, complete all as specified and directed

M&L for rendering 5 mm thick in cement mortar 1:4 mixed with water proofing compound @3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of wall finished surface even & smooth without using extra cement including chicken wiremesh where ever required, rendering height up to four (04) storey building, complete all as specifed and directed. Note: The rate of WPC shall be included in the quoted rate.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather proof paint of Apex Ultima of over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered wall/roof surface including cornice and chajja etc and applying two coats of weather proof exterior emulsion paint of Apex Ultima or equivalent make after preparation of surface, complete all as specified and directed.

M&L for preparation of old decorated plastered/un-plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of lime white wash on wall/ceiling, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), including demolition of old PCC and removing debris from site, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.

M&L for mild steel work of tublar pipes, joist, channel, angle, tee section etc fixed independently without connecting plates etc (cut to ordinary length within 20mm of the length indicated ) conforming to I. S.1161(1979) Fe 290 grade E-165, complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including dismantling of old sheet of any description and making good to disturbed portion etc, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including dismantling of old sheet of any description and making good to disturbed portion etc, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof bent to a curve of any radius as directed by GE fixed with self tapping screws including dismantling of old sheet of any description and making good to disturbed portion etc, complete all as specified and directed.

S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall/ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling paneling on PVC/wooden frame as per specification and drawing complete including dismantling of old unserviceble PVC lining, including fillets complete all as specified and directed.

S&F in repair tuffened glass 12mm thick as in hinged doors, partitions automatic doors and similar work with all stainless steel accessories as per site requirement including cutting to shape, drilling holes as required, complete all as specified and directed.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions including dismantling of existing ceiling board etc, complete all as specified and directed.

M&L for providing RCC type B-1, (1:2:4) (Nominal mix) by using 20mm graded crushed stone aggregate as in Slabs for cooking plate form, supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs, chajjas and in shelves and the like, including demolition of old RCC work, complete all as specified and directed

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls and similar work exc 5cm but n exc 10cm wide, complete all as specified and directed.

Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including casing & caping of 25mm width (Medium grade double locking system) complete with all accessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the disturbed surfaces, compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)

Description all as per srl item No. 117.00 above but one 3 pin 6 amp socket outlet on same board controlled by one 5 amp switch, complete all as specified and directed.

Description all as per srl item No. 117.00 above but one 3 pin 6 amp socket outlet on independent board controlled by one 5 amp switch, complete all as specified and directed.

Description all as per serial item No 117.00 above but for one 3 pin 15 amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper conductor cable with 2.5 sqmm single core multistranded FRLS copper cable as earthing lead, complete all as specified and directed.

S&F for switch piano flush type single pole one way 5 amps 240 volts, complete all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 6 amp flush type, complete all as specified and directed.

S&F for switch socket combination 2 in 1, 5 pin, 5/15 amp flush type, single pole, 240 volts, complete all as specified and directed.

S&F for fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed.

S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals, complete all as specified and directed.

S&F in replacement for lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent fittings complete all as specified and directed.

S&F in replacement for LED lamp 9 watt with battery backup upto 4 hours complete all as specified and directed.

S&F in repair for environmental friendly, ultra modern, energy saving, surface mounted, decorative wall light/bed light/ square or round light fittings 12 W, LED luminaire comprising of high brightness LEDs, including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, complete all as specified and directed.

S&F in repairs for environmental friendly, ultra modern, energy saving, LED panel square of 2 x 2 feet with unique alimmest recess cum surface panel, solution to provide variable cutout size for installation in recess of 36 watt complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

M&L in repair for LED Tube light fitting, 1x 20 watts, 220V, AC, complete with decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body,enviromental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

M&L in repair for LED Tube light fitting, 1x 10 watts, 220V, AC, complete with decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body,enviromental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

M&L in repair for MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables, complete all as specified and directed.

M&L in repair for MCB single pole & neutral 240 volts any rating from 32 to 63 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables, complete all as specified and directed.

M&L in repair for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-43 IK-09 protection single phase 240 volt 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good disturb wall surfaces to match with existing specification, complete all as specified and directed. (Note:- MCBs will be measured and paid separately.)

M&L in repair for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-43 IK-09 protection single phase 240 volt 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good disturb wall surfaces to match with existing specification, complete all as specified and directed. (Note:- MCBs will be measured and paid separately.)

M&L in repair for LED Tube light fitting, 1x 20 watts, 220V, AC, rechargeable Inverter Batten decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as specified and directed.

Taking down old unserviceable building security light fittings from any height and Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 3500 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 35 watt, with ingress protection IP 65/66 and SPD of capacity 5 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2009 including testing on completion including taking down existing unserviceable earthing, complete all as specified. (Note:-Earth wire and protection pipe upto board is included in the rate quoted)

Supply, Laying, connecting and testing of service cable of size 10 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular after taking down old unserviceable cable including others accessories, complete all as specified and directed.

M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items, complete all as specified and directed. (Note : - 02 run of 4 sqmm single core copper conductor cable and 01 run of 4 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).

M&L in repair for MCB TPN 415 volts any rating of 63 Amp with rupturing capacity 10 KA, including providing thimble for out going cables, complete all as specified and directed.

M&L in repair for MCCB FP 415 volts any rating from 63 Amp with rupturing capacity 16 KA, including providing thimble for out going cables, complete all as specified and directed.

S&F in repair for sheet metal enclosure VTPN distribution board, double door, triple pole and neutral with IP-43 protection three phase 4 way, 415 volts, alll connection to be done with proper thimbling and neutral link, fixed flush in wall including chases wall for fixing DB including MCCB as incomer and MCBs as outgoing and making good disturb wall surfaces to match with existing specification, complete all as specified and directed. (Note:- MCCBs & MCBs will be measured and paid separately.)

Supply, laying, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts including removing old unserviceable cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE)

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in hard/dense soil, for foundation, etc, or for cables/pipes etc n.exc 10 Sqm on plan and getting out, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness, complete all as specified and directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L for double wall corrugated pipe (DWC) of 75mm bore confirming to IS: 16205 Part-24 and IEC 61386 (Part-24)for cable protection of cable under/above ground surface all as specified and directed.

M/S IMRAN MAJID (BID ID -3414779)

M/s Anil Engineers & Builders (BID ID -3417159)