directed.

M and L Sand Cushioning dry in Trenches for protec tion of UG Cables below above and around the UG Cable laid in Trenches of 230mm

M and L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed.

Supplying and fixing Galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles

Supplying and fixing Galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles

Supplying and fixing Galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles

M and L for Boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified.

M and L for straight through joint heat shrinkable complete suitable for LT 1100 Volt aluminium conductor cable of size3.5 4 x 10 16 sqmm

M and L for straight through joint heat shrinkable complete suitable for LT 1100 Volt aluminium conductor cable of size3.5 4 x 25 50 sqmm

M and L for straight through joint heat shrinkable complete suitable for LT 1100 Volt aluminium conductor cable of size3.5 x 70 150 sqmm

Supplying and fixing High density polyethylene pipes HDPE of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia laid in trenches

Supplying and fixing High density polyethylene pipes HDPE of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia laid in trenches

Supplying and fixing High density polyethylene pipes HDPE of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia laid in trenches

Supplying and fixing High density polyethylene pipes HDPE of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia laid in trenches

Material and labour for earthing complete with Galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground Earth pit not less than 2.25m below ground level

Dismantling existing LT panels of any type any size carefully for reuse including necessary excavation demolition of concrete disconnecting of earthing

Labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc from any type of pannel board and replacing the same with

Supply only the followings to be incorporated against Item No 30.00 and 31.00 only 06 sqmm to 16 sqmm

25 sqmm to 50 sqmm

70 sqmm to 95 sqmm

120 sqmm to 240 sqmm

Epoxy type insulator upto 1100Volt for LT panel bus bar including nut bolts etc. complete all as specified and as directed.

Single core stranded Copper conductor FRLS of size 16 sqmm including copper lugs at both ends

Single core stranded Copper conductor FRLS of size 10 sqmm including copper lugs at both ends

Aluminium Busbars electrolytic grade of as per site required Amps and KA rating bus bars with RYB and black colour coding including drilling

S and F of Framed work as in doors or gates of angle or other section with gusset plates rails braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc

M and L for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers welding bending cold or hot drilling holes

M and L for cement concrete 1 3 6 type C 2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified

M and L for cement concrete 1 2 4 type B 1 using Bid Details 2/38 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded or chamfered

M L brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1 6 complete all as specified and directed.

M and L for 15mm thick in CM 1 4 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed.

M and L for Hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed.

M and L SS pasivated Screw Bolts Machine Made with Hexagonal Head at one End and screwed the other Ends each screwed End to be fitted with Washers and One Hexagonal Nut

M and L for preparation of existing surface of LT Panel by srapping down peeled off old paint cleaning etc and applying Two coat of Siemens Grey Paint

Supply and Fix Metal cable route indicator of height 750 mm MS Flat of 40 mm x 4 mm with Circular 100 mm diameter MS Sheet of minimun thickness 3 mm

Taking down dismantling of unserviceable LT panels complete all as specified and directed by Engineer in Charge.

Supply designing install testing and commission 3 phase and neutral 415 volts outdoor type CPRI type tested having certification

All as per BOQ Item No 57.00 here in before but of size 1.00m x 0.45m x 1.00m with the following incoming and outgoing accessories BUS BAR 4 Nos of bus bar

All as per BOQ Item No 57.00 here in before but but of size 1.20m x 0.45m x 1.20m with the following incoming and outgoing accessories BUS BAR 4 Nos of bus

Wrecking Crow Bar or Claw Bar as per IS 706 (Q3)

Disconnecting & taking out defective under ground LT cable from trenches