Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.8 L+₹2.4 L (7.28%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | A.M.CONSTRUCTION L2 | PURUSHOTHAMAN A BABU L1 |
|---|---|---|---|---|---|
| 1.01 | Picking the Existing damaged Clean removal of cement plaster from walls etc Complete | 33 | m2 | 8.89 ₹293.47 | 8.29 ₹273.57 Lowest |
| 2.01 | Plastering with CM1:5 (one cement and five sand) 20mm thick, in all floors including cost and conveyance of all materials to site and labour charges etc , Complete as per Standard Specification 10m2. | 33 | m2 | 617.76 ₹20,385.05 | 575.87 ₹19,002.75 Lowest |
| 3.01 | Dismantling Plain Cement Concrete etc Complete | 25 | m3 | 510.51 ₹12,760.79 | 475.89 ₹11,895.49 Lowest |
| 4.01 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication. | 30 | m3 | 5,844.93 ₹1,75,325.46 | 5,448.59 ₹1,63,436.72 Lowest |
| 5.01 | Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement etc,complete as per standard specification | 258 | m2 | 1,937.02 ₹4,99,754 | 1,805.67 ₹4,65,865.92 Lowest |
| 6.01 | Removing the Existing Damaged AC Sheet Roofing without roof timbers etc Complete | 331 | m2 | 18.54 ₹6,137.73 | 17.29 ₹5,721.54 Lowest |
| 7.01 | Fabricating supplying and fixing of prepainted galvanized iron sheets with the following specification. The materials should be of PPGItile profile with are dcolour or any other approved design 0.47mm thick 24guage having width 1050mm. The sheet should be G.I.base prepainted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120GSM paint thickness the finish should be terra cotta finish like mala bar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site conditionand as directed by the departmental officers. | 331 | m2 | 1,059.27 ₹3,50,618.87 | 987.44 ₹3,26,843.57 Lowest |
| 8.01 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high | 24 | m3 | 297.3 ₹7,134.38 | 277.14 ₹6,650.61 Lowest |
| 9.01 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area) | 19 | m2 | 2,539.95 ₹48,252.7 | 2,367.72 ₹44,980.71 Lowest |
| 10.01 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. Fully panelled Double leaf - Door | 2 | Nos | 9,377.76 ₹18,755.52 | 8,741.86 ₹17,483.72 Lowest |
Tender Value
₹34.1 L
EMD Value
₹34,076
Closing Date
20 Jun 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commissioner Madurai Corporation
Aringar Anna Maligai Thallakulam Madurai
Renovation work for Dogshelter in extension motor room at Dr. Thangaraj salai poor home in ward 31
2025_MAWS_566920_1
E1/EST- 81/ 25-26
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹34,076
26 Sept 2025
11 Jun 2025
20 Jun 2025
11 Jun 2025
20 Jun 2025
11 Jun 2025
Amount
Picking the Existing damaged Clean removal of cement plaster from walls etc Complete
Plastering with CM1:5 (one cement and five sand) 20mm thick, in all floors including cost and conveyance of all materials to site and labour charges etc , Complete as per Standard Specification 10m2.
Dismantling Plain Cement Concrete etc Complete
Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.
Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement etc,complete as per standard specification
Removing the Existing Damaged AC Sheet Roofing without roof timbers etc Complete
Fabricating supplying and fixing of prepainted galvanized iron sheets with the following specification. The materials should be of PPGItile profile with are dcolour or any other approved design 0.47mm thick 24guage having width 1050mm. The sheet should be G.I.base prepainted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120GSM paint thickness the finish should be terra cotta finish like mala bar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site conditionand as directed by the departmental officers.
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area)
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. Fully panelled Double leaf - Door
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels ,angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as pe rDesign given by the departmental officers etc, complete as per standard specification
Charges for Putting bore hole of size 23/30 cm dia for file foundation in Sandy and Other loose soil by using hand Boxing set Rate Shall be include the cost of Labour for Boxing Fule Charges for Auger Bore and Other T & P Employed etc., complete
Earth work excavation for foundalion in Hard stiff clay, stifi black cotton, hard red earth, shales munam, gravel,stoney earth and earth mixed wilh small size boulders SS.20B and Sand, silt or olher loose soil, wet sand,or sill not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasling inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Earthwork Excavation
Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.
Plain Cement Concrete 1:4:8 (one cemenl four flne aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, Iaying and labour charges and all incidential charges such as water providing etc., complete as per standard specitication
Plain Cement concrete 1:11/2:3 (one cement, One and Half sand, Three Course aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.
Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Upto Basement
Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Ground Floor
Supplying and erecting centering for sides and sotFits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to cenlre and supported by casurina props of 10cm to13 cm dia spaced at not more than 75 cm centre to centre etc. complete mmplying with the standard specificaiton. (Payment for centering shall be given after theconcrete is laid) - (Bottom Only)
Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in G.F
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and bindinq wire also in all floors.
Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications
Supply and delivery of following sizes of FRC Manhole Covers / Frames to stores as per IS 12592:2002 to its latest revision with reinforcement details for covers and frames (600mm dia FRC manhole cover to suit 600 mm clear opening manhole frame)
Painting One coats with ready mixed Old Wall Surface Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Painting Two coats with ready mixed New Wall Surface Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Painting two coats with Ready Mixed Enamel Paint over the New iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23
Supply and Fixing for LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END etc Complete 30W LED Street Light Fitting with LED etc Complete
Supply nad Fixing for 4’ 18W Crystal Glass LED Tube Light Fitting including Labour Charges etc Complete
Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc..
Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., (Size 60cm x 60cm)
Supply of PVC pipe sand GI pipes and specials. 110mm PVC Pipe
110mm PVC Bend
110mm PVC Elbow
110mm PVC Tee
32mm PVC Pipe
32mm PVC Coupler
32mm PVC Elbow
32mm PVC Tee
PVC Adhesive Solution 100 Gram
PVC Screw Down Tap Heavy Type 20mm dia
Supply and Fixing for AC Ceiling Fan complete 1200mm (48”) Sweep with 300mm Down Rod (without Regulator) (Higher End) Etc Complete.
Supply and Fixinf for AC Exhaust Fan 375mm (15”) Sweep (Heavy Duty) etc Complete
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Add GST 18%
A.M.CONSTRUCTION (BID ID -1372283)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .