Renovation of Mining Electronics Lab for the proposed Centre of Excellence (CoE) 5G Use case test lab at R and D Building, CMPDI HQ Ranchi

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing and laying modular carpet flooring of approved make and shade and made with 100% nylon 6/6.6 tufted textured tip sheared/ cut & loop piles, tiles of minimum 500mm x 500mm in size, stain resistant, anti microbial, and having colour fastness to water, fastness to light, rubbing fastness and castor chair suitability as per relevant standard for heavy commercial usage, with PVC free backing, nominal total thickness of minimum 6.50 mm, pile height minimum 3.4 mm, minimum Total Pile weight – 800g/sqm). Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content complying to GRIHA requirement, including fixing with GRIHA compliant adhesive of approved make, all complete as per drawings, manufacturer's specifications and direction of Engineer in Charge.

Corian top: Providing & fixing cladding with 'Corian' finish using Acrylic solid surface of 6 mm thickness on top of tables, facia storage units, columns etc etc. where directed. The rate to include all materials, labour, transportation, wastages etc. complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm

Providing and fixing of wallpaper with approved texture and minimum 350 gsm (gm/sqm) over an existing wall using Adhesives , including all complete as per direction of Engineer-in-Charge

PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm thick IS 710 ply fixed on frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO or equivalent conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered with approved make plywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick Gurjan/green ply/centurian ply or equivalent) with semiglossy PU polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect. The rate shall be in Sq.mt of actual paneling work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation area shall be measured and paid.

Supply of Luxalon in position suspended false-ceiling system using U Baffle Aluminium panel ceiling manufactured by competent manufacturer Adhering to TAIM quality standards and progreen certificate to be submitted by the manufacturer, of approved colour wood finish consisting of panel size 100 mm deep X 50 mm width,100mm module using 0.6mm thick, panel length upto 4 mtr, Powder Coated to required Colour from corrosion resistance Aluminium alloy AA 3105 (Al. Mg) for higher strength and good roll forming characteristics.(100% Recycleable),Powder coating should be in house. Panels shall be connected using a slotted angle suspension",&longer length to be connected by Baffle splice and the ends to be fixed with End Caps.Progreen certification and material test certificate to be submitted to the client.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square 12.5 mm thick tapered edge gypsum moisture resistant board.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mm long of approved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge.

Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete.

Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete.

Providing and fixing film etching with plotter cutting and application of 3M/LUMAR/GARWARE make or equivalent as per approved design on glass surfaces all complete as per instructions and patterns and design of the Architect.

Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Counter with storage:Providing and fixing of counter with storage cabinet formed of 18mm thick prelaminated MDF board formwork/carcass/adjustable shelves/shutters with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing . Top of cabinet to be formed of 19mm thick commercial plywood/board. The storage also to have drawer pedestals made of 18mm thick prelaminated MDF board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as shown in drawing. Top of cabinet to be formed of 19mm thick commercial plywood/board. Rear backing of cabinet to be formed with 12mm thick marine plywood. Counter top, facia and 200mm high partial splash board to be finished with Prepolished Granite Stone of approved shade & make as per details. All laminate shades to be of approved shade and colour. Cabinet to have concealed dustbin behind flap door formed of stainless steel in hairline finish as approved.All exposed wood surfaces to be finished with spray applied melamine polish. Also to provide skirting in laminate finish as per details. (Front area upto counter top to be measured and paid for). Storage to be complete with hardware installed as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. Each set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc.Hardware: The storage to have all necessary hardware/ Locks/ Handles D type Hettich (1180121 )/ Sensys Hinges or equivalent with opening 165 degree hettich(9243040) complete as per details drawing & shall be as per the approved model/make. (Hettich make or equivalent).Counter with storage of size 600mm (D) x 850mm (H)( approximately) with 19mm thick prepolished Granite stone

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm)

Supplying and installing roller blinds of approved make, model and shade at all heights and location and required width and comprising of approved shade and quality fabric, 1 mm thick anodized extruded Aluminium alloy roller tube of 38-mm O.D , a bidirectional operating Clutch mechanism designed for adjustment-free, slippage-free, crash proof smooth operation for all heights, high strength fiber glass reinforced polyester idler, powder coated steel Insert type brackets fitted with roller tube, round bottom rail, control unit engrooved with a Ball Pitch of minimum 6.5mm, Stainless Steel Ball Chain, and powder coated atomized steel installation brackets. The clutch mechanism comprises of a SS beaded chain and carbon steel spring wrapped by means of a high strength fiber glass reinforced polyester assembly to transmit motion from driving to driven members. The installation brackets shall facilitate overhead, side or face mounting with clutch assembly on either end of the roller. Idler shall consist of a centre shaft and outside sleeve which provide bearing surface for roller tube and rotate freely on centre shaft for smooth and quiet operation. Bottom rail along with the fabric shall be enclosed in a suitably created pocket and shall be of powder coated aluminium tube and closed from sides with end caps. The item includes all fittings, accessories, brackets, screws, anchor fasteners, fabric as per approved sample and shade all complete as per drawings, tender specifications, relevant standards and direction of Engineer in charge. (Height of blind from top bracket to bottom tube and width from bracket to bracket shall be measured for payment) Manual Roller Blinds with following specification: Composition- 30% Polyester (max),70% PVC on Polyester(min), Openness factor- 3-5%(as approved), Weight (gram/ sqm)- min 440 gm/sqm, Thickness- min 0.60 mm, Fire Classification- Class A( NFPA 101 or Class 1 (UNE EN 13773) or equivalent as per relevant, standards and specifications, Fastness to light- 6-7/8 or higher, Indoor Air Quality- GreenGuard / Eco-Codice Certified. Manufacturer's warrantee- minimum 5 years

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: Two coats

Providing and fixing of 4mm thick Veneer cladding of Maple or approved shade on existing partitions/panelling fixed with adhesive, matching grains and including spray applied matte melamine polishing. Veneer to be fixed in panels of width as specified and 4mm grooves as shown in drawings.

Supply and installation of approved shade Glossy Laminates paneling over 12mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing the golden plated metallic strips made of 201 stainless steel in the wall panelling system with finished width as per desgin of the wall panelled surface and the work shall be done as per instruction of Engineer-in-Charge

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in charge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing stainless steel ( Grade 304) railing/framing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing/framing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying and placing in position of conference table with Dimension: 2400X1200X750MM as per image/drawing enclosed in Tender Document. The work surface top should be of thickness 42mm top prelaminated particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm thick prelaminated particle & modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying and placing in position of 360 degrees revolving medium back chair as per image enclosed in Tender Document. The Craze chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying, and placing in position of reception Table with Diemension 1500 X 750 X 1050 mm as per Image/drawing enclosed in Tender Document . The table top made up of 36mm thick pre-laminated particle board and understructure shall be made of 25mm thick prelaminated particle board with 2mm thk pvc edge banding . Modesty & side panel shall be 25mm thk prelam particle board with 2mm thk pvc edge banding . Table top height will be 750mm from the floor level & one additional top at the height of 300 mm above the table top rest on SS stud/prelam vertical panel . overall ht of the table 1050mm. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Prelam particle board Mobile pedestal of size 400mm(L)x 450mm(D)x600mm(HT) (2 drawer + 1filling). Pedestal Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. 28D. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x 1100mm(H) as per image/photograph enclosed in Tender Document. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust Movement). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying, and placing in position of study table with Dimension(L) 1050mm X (D) 600mm X (H) 760mm as per image/ drawing enclosed in Tender Document . Easier And Organised With The Multi- Functional study table are made From Premium Quality Engineered Wood, It Features A Smooth Top With A Spacious Drawer And Shelf, To Keep Your Things Organised. The Walnut Brown Colour And Matte Finish Add An Elegant Look To Your Rooms Which Easily Compliments Any Interior. Material & Subtype:Engineered Wood - Particle Board, Colour & Colour Family:Brown - Walnut. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying, and placing in position of sofa with 3 seater Dimension (L)1905mm X (D)890mm X (H)870mm classic Contemporary design and slender curves as per image/photograph enclosed in Tender Document. The Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa. The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Supplying and placing in position of centre table with Dimension(W)1150mm X (D)550mm X (H)450mm as per image/photograph enclosed in Tender Document. The wooden centre table celebrates a marriage of simplicity and functionality. Resting atop a clear glass, it create a stunning contrast of modern and rustic. Timeless design that elevates your space. Open storage space for books or magazines with Kiln- dried solid wood is highly durable are made from sustainably sourced beech wood. The product should be from the manufacture which have BIFMA Compliance Certification, GREENGUARD/GREENPRO/FSC Certification,AIOTA Certification and from the approved make of Durian, Godrej,HNI. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. 3 X 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. 3 X 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. 3 X 4.0 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connection, testing and commissioning etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and erecting modular pop up Box 8 module suitable for AV/HDMI , RJ 45,6 A electrical sockets and switch on provided table and floor. Make Legrand, Havells, Polycab, or equivalent.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing 8 Module (125mmX125mm), GI box

Supplying,installation,testing an d commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply, Installation, testing & commissioning of Track mounted LED light with modern design, Compact size with high power COB LED Light, 25W with dia cast aluminium housing complete with driver & all fixing accessories as required on provided Track of suitable size. Ref. HAVELLS : UNECOTRACKLIGHTTS25WLED830S60WHT or apporoved equivalent.

Supply, Installation, Testing and commissioning of 1 Mtr Track suitable for track light along with all accessories

Supply, Installation, Testing and commissioning of 2 Mtr Track suitable for track light along with all accessories

Supply installation, testing and commissioning of 25W Techzone LED Tube light. Uniquely clean & simple lighting system offering continuous light for armstrong techzone ceiling system. Housing in aluminum extrusion and CRCA in white powder coated finish and metal End caps. Fixture size: (LxWxH) in (1195x146x50) mm Ref. HAVELLS : TZLR25WLED857SPSWH1195 or apporoved equivalent.

Supply, installation, testing and commissioning of 25W SUSPENDED CIRCULAR LIGHT. The fixture shall be of circular shape Dia-400 MM & Height 70mm complete with all fixing accessories mounting kit, Suspension kit etc as required of Cate. Ref. HAVELLS : MONDO400RDP/S25WLED830SPSWH or apporoved equivalent.

Supply, installation, testing and commissioning of 25W SUSPENDED CIRCULAR LIGHT. The fixture shall be of annular shape Dia-600 MM & Height 78mm complete with all fixing accessories mounting kit Suspension kit etc as required of Cate. Ref. HAVELLS : TORUS600RDP/S25WLED830SPMMAWH or apporoved equivalent.

Supply of 20W surface and wall mounted LED Tube light with aluminium housing & integrated electronic driver.

Supply, installation, testing and commissioning of 7 W LED Surface/recessed mounted LED round/square shape down light luminaire with pressure die casr housing for single phase supply voltage. Ref. HAVELLS : INTEGRAHEDLR7WLED857S or apporoved equivalent.

Supply, installation, testing and commissioning of Ultra modern recess mounting 36 watt (2' x 2') luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete with all fixing accessories as required of Cate. Ref. HAVELLS : PLANO2X2PLR36WLED865S or apporoved equivalent.

Supply, installation, testing and commissioning of Ultra modern recess mounting 24 watt (2' x 2') luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete with all fixing accessories as required of Cate. Ref. HAVELLS : PLANO2X2PLR24WLED865S or apporoved equivalent.

Supply, installation, testing and commissioning of Surface mounted 30 watt LED Panel light (4' x 1') provides soft light and glare free symmetrical illumination complete with integrated electronic driver & LED directly on ceiling.complete with all fixing accessories as required of Cate. Ref. HAVELLS : PLUTONEO4X1PLR30WLED840S or apporoved equivalent.

Supply, installation, testing and commissioning of profile light consisting of 1) FLEXIBLE LED STRIPS 70W per 5 Mtrs- 5mtrs 2) ALUMINIUM PROFILE HOUSING of required size compitable with LED Strip- 5mtrs 3)Diffuser shal be Clear/Opal or frosted Polycarbonate.- 5mtrs 4) Driver for Led Strip 96W (24V) or as required- 1No complete with all fixing accessories as required Make Jaquar, Havells, or approved equivalent

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4+24), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40A

Supplying and fixing following rating, double pole, 230 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 40A

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 8 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 14 way, Double door SPN MCBDB

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required

Supplying and installation of following sizes 2.0 mm thick GI Raceways with plain cover in recess/ on surface including chasing the wall/floor complete with horizontal & Vertical Bend as required 300 mm x50 mmx2.0mm /2 comportment

Supplying and installation of following sizes 2.0 mm thick GI Raceways with plain cover in recess/ on surface including chasing the wall/floor complete with horizontal & Vertical Bend as required 200 mm x40 mmx2.0mm /2 comportment

Supplying and installation of following sizes 2.0 mm thick GI Raceways with plain cover in recess/ on surface including chasing the wall/floor complete with horizontal & Vertical Bend as required 150 mm x50 mmx2.0mm /2 comportment

Supplying and installation of following sizes Junction box on surface including chasing the floor complete as required. complete as required 250 mm x 250 mmx 60mm x 2.0mm /2 comportment

Supplying and installation of following sizes Junction box on surface including chasing the floor complete as required. complete as required 150 mm x150 mmx 60 mm x 2.0mm /2 comportment

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (For Electrical Panel)

Providing and fixing 25 mm X 5 mm G.I. stip in 40 mm dia. G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 150 sq. mm (50mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2 3.5c x 150 sqmm

Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2 3.5c x 70 sqmm

Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2 4c x 16 sqmm

UPSDB Supply, Installation, Testing & Commissioning , of cubicle type compartmentalised board made out of 16 gauge CRCA sheet, totally enclosed, floor/wall mounted with channel base frame, dust and vermin proof, indoor, suitable for operation on 415 V, 50Hz AC supply with extensible busbars on both sides including control wiring with 2.5 sq mm size wires/cable, interconnection, duly powder coated painting, earthing, labelling etc. including supply & installation of following switchgears,metering instruments and accessories as per specifications. INCOMING: 1 Nos. 100Amps FP MCCB With Double Neutral 16kA With thermal magenetic release for O/C,& S/C Protection. One (1) Set of Phase Indication & ON/OFF Lamp with 2A SP MCB. BUSBAR: 200 Amps TP&N aluminum conductor bus bar (BPTM type Heat-shrinkable busbar insulation) supported by DMC / FRP insulators. OUTGOINGS: 5 nos. 32A DP MCB 10kA 4 nos. 32A DP MCB 10kA LED ON Indication Lamp with 2A Fuse. UMDB above & as per SLD

UPS: Supply,installation, testing & commissiong of 15kVa online UPS three phase input and single phase output power syatem of input voltage range 110V AC+/-5%, - 300V AC +/- 5%, Frequency range 40Hz- 60Hz, power factor>= 0.90@ full load, and output voltage range 200V/208/220/230/240V A, Voltage regulation +/-1%, ewquency range50Hz +/- 0.25Hz or 60Hz +/-0.3Hz harmonic distortion< 2% THD (Linear Load): 4% THD (Non-Linear Load). Efficency- 88/83%. UPS system shall consist of Sealed Lead Acid Maintenance free 12V batteries with suitable size Rack for 15kVA UPS with 30 Mins (Min). backup time on each UPS module with inerconnectors as per specification. Battery shall be covered under 24 Months Replacement Guarantee.

Supply, Installation, Testing and Commisioning of RJ45 Connectors

Supply, Installation, Testing and Commisioning of Modular socket for CAT 6

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25MM

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

Supply and fixing of ACP base for 3D/2D Board

Supply, installation, testing and commissioning of Acrylic Letter with Light (3D)

Supply, installation, testing and commissioning of Acrylic Letter with Light (2D)

Supply, installation, testing and commissioning of Translit Board

Air Cooled Condensing Units: OUTDOOR CONDENSING UNITS: Supply, installation, testing and commissioning of top- discharge Variable Refrigerant Flow (VRF) Air- conditioning system suitable for heating & cooling by inverter driven capacity control compressor complete with indoor and outdoor units with individual controller, refrigerant cooled PCB and with fittings etc. as per quantity given below i.e. full charging of R-410A refrigerant gas complete with duly powder coated etc. as required. Each module should have minimum one inverter scroll compressors up to 24HP and two or more above 24HP. The system will operate stably at extreme temperature ranging from -5°C to 54°C DB for cooling operation and -25°C to 24°C DB ; tentative capacity of the individual condensing units can be 8/18/20/22/24/28/30/32 HP. Total capacity should be 40HP. Capacity of individual condensing unit may vary as per manufacturer's design making total capacity of outdoor condensing unit 40 HP.(Make: Mitsubishi Heavy, O General, Voltas, Toshiba, Trane or approved equivalent)

Supply, installation & Commissioning of 1 way type cassette unit complete with Grill & cordless remote of Nominal capacity of 1.45 TR each

Y-joints: Supply, installation, testing and commissioning of Y- Joints with insulation to connect indoor / outdoor units with main header (1 Set will comprise of 2 Nos Y- Joints each for suction & discharge side)

Refrigerant Piping: Supply, Installation, testing & commissioning of interconnecting hard / soft drawn seamless pair of refrigerant copper pipe work of variable dia as per air conditioning norms silver soldering joints as required at site & as per specifications insulated with 13mm/19mm thick class "1" closed cell electrometric nitrile rubber tubular insulation between Indoor Unit & outdoor units as per specifications. (Make: Mandev, Max Flow, Rajco) 12.7mm

Refrigerant Piping: Supply, Installation, testing & commissioning of interconnecting hard / soft drawn seamless pair of refrigerant copper pipe work of variable dia as per air conditioning norms silver soldering joints as required at site & as per specifications insulated with 13mm/19mm thick class "1" closed cell electrometric nitrile rubber tubular insulation between Indoor Unit & outdoor units as per specifications. (Make: Mandev, Max Flow, Rajco) 19mm

DUCTING: Supply, installation, balancing and commissioning of site fabricated GSS/GP sheet rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications complete as required with thicness 1.00 mm sheet (Make: TATA, SAIL)

ACCOUSTIC LINING OF DUCT: Supply and fixing of acoustic lining of supply air duct with 10mm thick open cell nitrile rubber insulation as required as per specifications. (Make: A-Flex, K-Flex, Supreme)

THERMAL INSULATION OF DUCT: Supply and fixing of 15mm thick nitrile rubber for thermal insulations per site requirement etc. complete as per specifications. (Make: A-Flex, K-Flex, Supreme)

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supply, Fixing, testing and commissioning of 16 G Frame blade with 100mm depth Volume control duct Damper as required

Supplying, Fixing, testing and commissioning of fire dampers as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. (Including Actuator, sensor and all other required accessories) Fire damper

Supplying, Fixing, testing and commissioning of fire dampers as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. (Including Actuator, sensor and all other required accessories) Actuator

Fresh air louver of extruded aluminium construction (min 100 mm deep), Powder coating finish colour.

Drain piping: Supply, fixing & testing of uPVC condensate drain pipes insulated with 9mm thick nitrile tubular insulation complete with all necessary fittings such as elbows, tees, supports etc as required.

Supply & fixing of 2C x 1.5 Sqmm copper shielded control/communication cabling inside pvc conduit pipe from indoor units to outdoor units.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supply & commissioning with Refrigerant.

HVAC Power Distribution Board: Design, Supply, Installation, Testing & Commissioning , of cubicle type compartmentalised board made out of 16 gauge CRCA sheet, totally enclosed, floor/wall mounted with channel base frame, dust and vermin proof, indoor, suitable for operation on 415 V, 50Hz AC supply with extensible busbars on both sides including control wiring with 2.5 sq mm size wires/cable, interconnection, duly powder coated painting, earthing, labelling etc. including supply & installation of following switchgears,metering instruments and accessories as per specifications.(Panel Suitable For Outdoor Type - IP54), Location Near ODU 7 and for AHU Unit(Make: Havells, Simens, Schneider) Input, output & busbar rating may vary as per actual requirement but not less than as stated below: I/C- 100a MCCB- 1 No bus bar-200A, OG- 63A MCCB- 4 NO's 32A DP MCB-2 NO's alongwith all other accessories such as indiation lamp,multimeter ct pt etc complete.

Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender. For VRV Outdoor Units 4C x 16 Sq. mm Copper Conductor (Unarmoured)

Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender. For VRV Indoor Units 3C x 2.5 Sq. mm Copper Conductor

Supply & Fabrication of MS constructed structure for VRF Outdoor base made of channels and angles.

Comprehensive annual maintenance cost for 1st year after successful completion of 1 year of warranty.

Comprehensive annual maintenance cost for 1st year after successful completion of 1 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 2 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 3 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 4 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 5 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 6 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 7 year of CAMC.

Comprehensive annual maintenance cost for 1st year after successful completion of 8 year of CAMC.

Total impact of GST for the purpose of CTC

S.S. CONSTRUCTION