Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹75.5 L
EMD Value
₹5.8 L
Closing Date
26 Nov 2026, 12:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
basti circle
basti circle
SR OF BHADARIYA BADHNI CHAFA ROAD TO BAYTAAL ROAD
2026_CEUBZ_1209776_10
6303/4E-NIVIDA-BASTI CIRCLE/2026-27 DATED-31-10-2026
Open Tender
Civil Works
Percentage
60 days
basti circle
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹5.8 L
basti circle
18 Nov 2026
18 Nov 2026
26 Nov 2026
18 Nov 2026
26 Nov 2026
18 Nov 2026
20 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting stone aggregates of pot holse filling with 22.4-53mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, Type - B screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.as per Technical Specification Complete in all aspects or as per direction of E/I.(Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects. | 207 | Cum | 5,000 | ₹10,35,000 |
| 2 | Providing and applying tack coat with bitumen VG-10 using bitumen distributor @ 3.00 Kg/10sqm. on the prepared bitumenious surface cleaned with hydraulic broom as per Technical Specification Clause 503. as per Technical specification complete in all aspect or as per direction of E/I. (Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects. | 6,450 | Sqm | 25 | ₹1,61,250 |
| 3 | Providing laying and rolling of open - graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm (crushed stone chipping 13.20mm @ 0.18 cum./10 sqm. and crushed stone chipping 11.2mm @0.09 cum/10sqm.)aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a Three wheel 8-10 KN static roller capacity finished to required lavel and grades to be followed by seal coat either type C as per technical specification clause 508 by manual means (1) Bitumen (VG-10) @ 14.60 Kg/10 sqm. as per Technical specification complete in all aspect or as per direction of E/I. (Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects. | 6,450 | Sqm | 270 | ₹17,41,500 |
| 4 | Providing and laying seal coat sealing the voids in a bitumenious surface laid to specified levels, grade and cross fall using Type C with 6.7 mm crushed stone chipping @ 0.09 cum/10sqm. as per Technical Specification Clause 510. Bitumen (VG-10) @ 6.50 Kg/10 sqm. as per Technical specification complete in all aspect or as per direction of E/I. (Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects. | 6,450 | Sqm | 99 | ₹6,38,550 |
| 5 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per approved job mix formula by competent authority of approved drawing and Technical Specification Clause 1501. (Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects | 382.5 | Cum | 10,000 | ₹38,25,000 |
| 6 | Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50 mt. in depth and work in embankment to been 20 cm. layers includding ramming and dressing the surface to required level and slope and also including 1.5 mt. lift and 30 mt. lead as per SL. No.253 detailed specification & direction of E/I. for Embankment work.(Rate are Excluding G.S.T. but including All Taxes Royality, Labour Cess, Material & T&P) with all aspects. | 985 | Cum | 77 | ₹75,845 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.70 MB
BOQ_2297313.xls
BOQ • 0.26 MB
10.pdf
Tender Documents • 4.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .