Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹37.0 L+₹3.0 L (8.74%)Rejected-Finance CHENNAI | CHENNAI | TAMIL NADU | 600001 | L2 | Rejected-Finance Being L1 Not Bidder | |
| 3 | L3₹39.6 L+₹5.6 L (16.3%)Rejected-Finance C 150 ADG P CHENNAI | L3 | Rejected-Finance Being L1 Not Bidder | |
| 4 | L4₹41.3 L+₹7.3 L (21.5%)Rejected-Finance 109 D ALLAI SALT COMPOUND OLD LAKSHMI THEATRE KRISHNAPURAM COONOOR 643102 THE NILGIRIS | COONOOR | THE NILGIRIS | TAMIL NADU | 643102 | L4 | Rejected-Finance Being L1 Not Bidder |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDN/ALTN TO SERVANT QTRS OF BLDG NO XXVI, XVIII, XIX, XII AND NILGIRI 5 TO 8 AT DSSC WELLINGTON
2022_MES_559621_1
8272/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹59,000
Yes
17 Dec 2022
22 Oct 2022
19 Nov 2022
22 Oct 2022
17 Nov 2022
5 Nov 2022
Amount
B/R PORTION Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.
Dismantling timber scantlings as in fillets, rails, posts rafters, purlins etc in framed/unframed work, not exceeding 40 sqcm in section in any position, complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed.
M&L for Reinforced cement concrete M-15 (Nominal mix), type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, cooking platforms, beams etc complete all as specified and directed.
M&L pre-cast cement concrete block in cement concrete masonry 1:3:6 type B-1 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.
Demolition of floor hearth or wall tiling including cement mortor bedding(but not backing) removing serviciable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick PCC type B-0 1:2:4, using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and directed
M&L for Glazed ceramic coloured tiles 300 mm x 600 mm x 6 to 7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cement plaster 1:4 complete all as specified and directed.
All as per item No 15 above but in skirting/dado over 15 mm thick screed bed or bedding layer of mortar in cement plaster 1:4 complete all as specified and directed.
M&L for non skid ceramic tiles 8 to10mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bed in CM 1:4 including rounding to the ends of granite and making holes for inserting the gas pipe complete all as specified and directed.
Form work to soffits of suspended slab such as roof slab, floor slab, shelves and similar works, finishing rough the concrete surfaces complete all as specified and directed.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls , floors and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works and similar works, finishing rough the concrete surfaces complete all as specified and directed.
M&L for TMT bars 10mm dia and over in re-inforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Ditto, but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venneers: supplied, 35 mm thick fitted to chowkats, complete all as specified and directed.
M&L for factory made Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.
M&L for Steel windows/ventilators (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.
M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.
M&L for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.
S&F for Aluminium, anodised, barrel tower bolts of extruded section, 200mm long, complete all as specified and directed.
S&F for 300 mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
S&F for Mild steel cold rolled Butt hinges, medium weight, 100 mm long, complete all as specified and directed.
S&F for Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed.
S&F for stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
M&L for PCC type B-0 (1:2:4) as in filling of steel chowkhats or frames or hold fast etc complete all as specified and directed.
S&F framed work such as grills, grating, guard bars etc. and similar works conforming to Fe-290 Gde-E 165 complete all as specified and directed.
S&F Tubular towel rail, 20 mm dia, 60 cm long, chromium plated with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs (fixed in repair), complete all as specified.
S&F Roof tubular trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, chaneel or flat section), column including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified and directed.
S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A), cleats etc complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and directed
S&F for Galvanised, corrugated mild steel sheeting of 0.60mm thickness with two corrugations side lap fixed with coach screws and washers, in roof, walls etc with grade of zinc coatingh 275 and fixed with L type or J type or cranked hook bolts in lieu of screws complete all as specified and directed
S&F for Plain, galvanished, mild steel sheeting of 0.60mm thickness, in ridges, hip, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
M&L Hardwood 2nd class clean sawn battens at 30 cm centres exc 15 & n exc 25 Sqcm complete all as specified and directed
M&L 2nd class hardwood plain fillets square, rectangular or traingular in triangular in section, clean sawn, secured with nails or brads exc 13 and n.exc 25 sqcm complete all as specified and directed
M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed
All as per item No 43 but fixing only complete all as specified and directed
M&L for ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1 : 3 or cement mortar 1:6 complete all as specified and directed
M&L Providing, plain cement concrete type C1 (1:3:6) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and directed
M&L for preparation of old mangalore pattern tile surfaces and applying one coat of anti fungal paint weather coating (tile guard of Asian Paints or equivalent in Berger/Shalimar) surfaces, complete all as per manufactured instruction
M&L for preparation of new mangalore pattern tile surfaces and applying two coats of anti fungal paint weather coating (tile guard of Asian Paints or equivalent in Berger/Shalimar) surfaces, complete all as per manufactured instruction all as specified
M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed
M&L for 75 mm thick plain cement concrete type C-2, 1:3:6 (using 20mm graded aggregate) as in plinth protection finished fair & even without using extra cement, complete all as specified and directed
Taking down cement plaster, any description, on brick or stone walls, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L and rendering 15 mm thick cement plaster 1:6, on stone masonry surfaces other than fair face of brick work or on one side lathing and finishing the surface even and smooth w/o using extra cement. complete all as specified and directed
M&L for preparation of newly plastered surfaces of walls including preparation and applying two coat of OBD on new surface over a coat of primer on walls and over a coat of wall care putty complete all as specified and directed
Complete removal of existing treament from old plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper over a coat of primer on walls and over a coat of wall care putty complete all as specified and directed
M&L for preparation of newly plastered surfaces of walls including preparation and applying two coats of weather coating external emulsion (APEX ULTIMA of Ashian Paints or equivalent in Berger/Shalimar) over a coat of primer on walls complete all as specified and directed
M&L for complete removal of existing treatment from external walls and applying two coats of weather coating external emulsion (APEX ULTIMA of Ashian Paints or equivalent in Berger/Shalimar) over a coat of primer complete all as specified and directed.
M&L 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed
M&L 4 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed
M&L for prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed
M&L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed
Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and directed
S&F Steel tubes, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed
Taking up/down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes complete all as specified and directed
S&F Steel tubes, 20 mm bore, galvanised, medium grade' with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor incl cutting chases for concealed work etc, complete all as specified and directed
S&F for Rotational moulded polythene water storage tanks, triple layered 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F for cast copper alloy chromium plated 15mm dia bib tap of Make : Prayag, Cat No : 7206 or equivalent in Parryware / Hindware/ Cera, with wall flange complete all as specified and as directed.
S&F for 15mm bore Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F for cast copper alloy chromium plated 15mm dia angle cock of Make : Prayag, Cat No : 7210 or equivalent in Parryware/ Hindware/ Cera, with wall flange complete all as specified and as directed.
M&L for 20 mm bore stop valves, cast copper alloy,chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed
M&L for Ball valves high pressure of PTMT for 20mm bore pipe with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) (fixed in repair), complete all as specified and directed
S&F for sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed
M&L for Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and directed
S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/wall 110 mm mm dia complete all as specified and directed
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors/wall 75 mm mm dia complete all as specified and directed
S&F 75mm PVC (SWR) floor trap, plain with SS grating including jointing complete all as specified and directed
S&F 110mm PVC (SWR) junction single, bends with access door type complete all as specified and directed
S&F 75mm PVC (SWR) bends with access door type complete all as specified and directed
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed
S&F stainless steel curtain rod 25mm dia incl side caps and single/double brackets of same material, as in repairs including end bushes complete all as specified and directed.
M&L for 2nd class Hard wood decorative Weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed including dismantling of weather borarding complete all as specified and directed
Surface dressing n. exc 15 cm deep and getting out in hard/dense soil complete all as specified and directed
M&L for Hardcore of gauge n exc. 63mm (broken stone or boulders ), deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and direction
M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm gradded stone aggregate as in sub base of flooring complete all as specified and directed
M&L for Machine pressed pre polish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade concrete with grey cement and pigment laids over and including 50mm thick sand compacted layer complete all as specified and directed
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out hard/ dense soil complete all as specified and directed The Quoted rate deemed to include clearing away vegetation, saplings, under growth, roots and removing rubbish complete all as specified and directed.
Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.
Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. Note for Item Nos 89 to 91 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Bajaj plast/Finolex
(a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.
(b) One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No 92 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Note for Item Nos 92 & 93 : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit-Precision/Bajaj plast/finolex. NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW065, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma.
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor NOTE for Item Nos 100 to 103 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor
S&F in repairs call Bell, AC, Bul bul chime type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells
S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No:ENDURALINEARNE OBS10WLED865SPCWHor techno-commercially equiv In Jaguar/Philips
S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARNE OBS20WLED865SPCWH or techno-commercially equiv In Jaguar/Philips
S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857 SSYMBOPC or techno-commercially equivalent in Philips/Jaguar
Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc. complete all as specified & as directed incl taking down old/unsv fittings. Make: Cat No ENDURASUNDOWNSL30WLED757PASYBOPC OF HAVELLS or techno-commercially Equivalent in Jaguar/Philips
Supply, fix and test LED Flood light fittingssuitable for fixing on poles any type, of capacity 120 Watts, CRI>70, Power factor >0.95 colour temperature 5700K, luminous Efficacy not less than 100 lumens/watt, colour temperature 5700K, 12000 lumens output, IP-66 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cast aluminium housing and finishing epoxy powder coated with all accessories as per manufacturer's instructions and connecting up ncluding necessary fixing arrangement, in the form of MS Clamps complete all as specified and directed. Make: Havells, Cat No:JETAIRISFLS 120WLED757APWBLTG or techno-commercially equivalent in Philips/Wipro
S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOECE1TZ1O014, Model - Stylo or techno-commercially equivalent in Philips/Jaguar
Supply and fixing in repairs LED lamps of the 10W, 6500K with B-22 base cap all as directed by the Engr-in- Charge Make : Havells//Jaguar/Philips
Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens
S & F 2 Way Enclosure, IP43, IK09, Metal single door type fitted without busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T or techno-commercially equiv in Legrand/Siemens
S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.
S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.
Imp Note for Item Nos 106 to 117 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. incl taking down old unsv earthing complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete. Make of GI Pipe : TATA/Jindal/Prakash
Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil.
Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.
Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.
Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces). Make:Tata/Jindal/Prakash
M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 16 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 2 Core 6 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab
Supply, spreading and compacting of Riddled sand in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge
M&L for 2nd class harsd wood (Sal/Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge, etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, Clause 8.24(a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based materials of any description not otherwise described over 10CM width or girth and applying one coat of Synthetic Enamal Paint including filling of holes by filler (fevicol and woode dust) complete all as specified and as directed.
JK BUILDERS
S.RAMACHANDRAN
K.AYYAPPAN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .