GE/SRA/T-39/2025-26

Amount

SCHEDULE 'A' PART-I (REPAIR/MAINT OF OLD MONSOON DRAIN)

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. And removal of debris from site complete all as specified and as directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brick work using Serviceable Bricks obtained from Item No. 01 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:4, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc and removal of debris outside AF land complete all as specified and directed.

M&L for rendering, 15mm thick, in cement mortar 1:4 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in coping incl necessary form work and surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Paving, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for Cement Concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate) as in foundation filling & mass concrete, sub base of drains etc complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C1 (20 mm graded crushed stone aggregate), for bedding inside of drains, surface channels etc, made to shape required and inner surfaces of drain finished even and smooth using extra cement complete all as specified and directed.

M&L for surface dressing not exc 15 cm deep in soft/loose soil, including removal of vegetation, shrubs etc and disposal of debris outside AF premises complete all as specified and directed.

M&L for removal of accumulated silt/soil (depth of silt/soil n. exc 40cm) alongwith grass/bushes if any, from the beds of R/way/PTT side open drains (depth of drain up to 1.5 m), girth of drain bed not exceeding 1.50 m, getting out including removal of excavated material from the sides of drain to outside Air Force premises and disposed off as per Municipal Corporation/State Govt regulations complete all as specified and as directed. Note : Depth of silt/soil only shall be measured for payment. Rates of removal of grass / shrubs / vegetation etc from inside of drain are included in the item and no extra depth shall be measured for the height of grass/shrubs/vegetation removed.

M&L for bringing suitable approved earth from outside AF land, breaking of clods and stacking on site for measurement complete all as specified and directed. NOTES :- (1) Earth required for embankment/filling shall be of approved quality and shall be brought from outside the AF land by contractor under his own arrangement. No extra shall be admissible on this account. (2) Quoted rate shall be deemed to included for all labour required for excavation, removing the soil, loading and unloading, transportation to site, making temporary profiles, levelling etc. (3) Density of finished earth in embankment, traverse etc shall be as directed by GE/Engr-in-Charge. (4) Necessary deduction for voids in terms of Para 3.6 on Ser page No 21 of SSR Part-II, 2020 (Rates) shall be carried out from the finished quantity of earthwork. Contractor's quoted rate shall be deemed to be inclusive of the above aspect and no claim shall be entertained at a later date in this regard.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming and finishing to required size, shape, slope etc., n exc. 1.5 m high or deep from base/ground level complete all as specified and directed.

SCHEDULE 'A' PART-II (REPAIR/MAINT/CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS & SOAKAGE WELLS)

M&L Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Cleaning of Manhole) by deploying Tradesmen as per Stipulated Time Frame from 9.00 AM to 5.00 PM and maintaining proper Records of COMPLETED and PENDING Complaints including updating status of Complaints through SMS/Manually for TECHNICAL AREA of AF STATION SIRSA, complete all as specified and as directed. NOTES : (a) If the Complaint is not attended / removed within a Day, Recovery @ Rs 50/- per day per complaint will be levied on the Contractor for non-complelion of the Complaint. (b) It is mandatory on the Part of Contractor to deploy minimum 02 No. of Safaiwala/Mazdoor with requisite T&P throughout the Entire Contract Period. However required manpower and T&P, if required more to meet the requirement as mentioned in BOQ Item is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra will be admissible on this account other than Quoted Rates for BOQ Item. In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.

M&L for Cleaning of Choked Sewer Lines of size 100mm to 150 mm Dia at any depth, Manually and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed. NOTE : (a) If the Complaint is not attended within a Day, Recovery @ Rs 50/- per day per complaint will be levied on the Contractor for non-complelion of the Complaint. (b) It is mandatory on the Part of Contractor to deploy minimum 02 Nos Safai Wala/Mazdoor with requisite T&P throughout the Entire Contract Period. However required manpower and T&P, if required more to meet the requirement as mentioned in Item is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra will be admissible on this account other than Quoted Rates for Item. In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.

All as per Item No. 2.02 above but for cleaning of sewage line of size 200 mm dia to 250 mm dia

Cleaning of Manhole chamber of any size, up to depth 1.0 metre each, manually, removing muck / sludge / silt / mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge/debris/rubbish out of MOD land complete all as specified and directed. (NOTE: This item shall be executed only under emergency requirement)

Cleaning of Manhole chamber of any size, up to depth 1.0 metre each, by mechanical means, removing muck/sludge/silt/mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge/debris/rubbish out of MOD land complete all as specified and directed.

Cleaning of Manhole chamber of any size, of depth exceeding 1.00 metre but not exceeding 3.0 metre each, by mechanical means, removing muck / sludge / silt / mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge/debris/rubbish out of MOD land complete all as specified and directed.

M&L Dewatering Sludge from Soakage Wells by Pumping out as required to keep the Complete Sewage System in order and as to avoid any Over flowing of Sewage Water including removing of Soak Well water pumped out as such out side of Defence Land by means of Pumps and Tankers (Capacity of Water Tanker shall be 5000 Litres) as required including Operating and Supervisory Staff(s) so as to keep the whole Station area Pollution Free, complete all as specified and as directed. NOTE : In/out register for tanker should be updated at the Guard Room by the contractor and signature of Security Guard and contractor are mandatory for payment of the item.

M&L Desilting/Cleaning of Septic Tank and the like including Sludge Water and Solids Mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank and disposal of the same to Outside of MD/AF Land, complete all as specified and as directed. NOTE : Desilting/Cleaning of Septic Tanks shall be done for TWICE in the entire Contract Period.

Demolition Cement Concrete (reinforced) of any description (above or below Ground Level) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. (NOTE: Reinforcement of the demolished RCC members shall be measured under Sch of Credit.

M&L Reinforced Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) in Bands, etc., finished Even and fair complete all as specified and as directed. NOTE : Formwork & Reinforcement will be Measured and Paid separately under relevant Items.

M&L Reinforced Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) in Slabs supported on Walls, etc., finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Formwork & Reinforcement will be Measured and Paid separately under relevant Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs, Manhole Cover Slabs, etc., set in Cement Mortar 1:4, with necessary formwork including dismantling and removal of damaged precast slabs etc complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid separately under relevant Item. Old reinforcement will be measured under Sch of Credit.

M&L for Use and Waste of Formwork to Soffits of Suspended Slab and similar work not exc. 200mm thick, Fair Finished surfaces, complete all as specified and as directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and similar work exc 10 cm but n exc 20 cm wide for rough finished surfaces complete all as specified and directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified & directed.

M&L TMT Bars 6.0mm to 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified & directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. and removal of debris from site complete all as specified and directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Fly-Ash Bricks (Old Size Bricks) in One Brick thick Walls Honey Comb Walling, built in Cement Mortar 1:4, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls/Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for preparing New Plastered Surfaces of Walls, applying a coat of suitable cement primer followed by a Coat of 2.0 mm thick Wall Putty (in two layers of 1mm thick) including rubbing down with Sand Paper to obtain a smooth finish surface and finishing with Two Coats of Acrylic/Oil Bound Distemper (as approved) as per desired shade/tint complete all as specified and as directed.

M&L for preparing old treated/decorated surfaces of walls and applying One Coat of White Wash, complete all as specified and directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (up to any height) for external surfaces complete all as specified and directed. NOTE : Water Proofing compound shall be measured and paid separately as "Supply only".

Supply only Liquid Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L for preparation of newly plastered surfaces and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, up to 4 storey height incl necessary scaffolding safety gear etc complete all as specified and directed.

Demolition & breaking up Drain Pipe 150mm dia (Salt Glazed Ware, AC or Reinforced Concrete) set in Cement Mortar, along with concrete bedding complete all as specified and as directed.

Supply and laying Reinforced Concrete Pipes 150mm (internal dia), Class NP-3, laid in Trenches on Concrete Bed, to required Slope, jointed with jute & cement mortar 1:1, complete with collars all specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 150mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Excavating Over Areas exc 1.5 Metre but not exc. 3.00 Metre deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, filling in approved Soft/Loose Soil including spreading levelling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed.

M&L Loose Filling with Aggregates of gauge 80mm to 150mm (Broken Bricks) in Soakage Pits, Soakage Wells, etc., complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC pipe clips complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC pipe clips complete all as specified and as directed.

S&F in repair PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 75mm bore OD, jointing with Solvent Cement and fixed, complete all as specified and as directed.

-ditto- but 75 mm OD bend with access door

S&F in repair PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 110mm bore OD, jointing with Solvent Cement and fixed, complete all as specified and as directed.

-ditto- but 110 mm OD bend with access door

S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.

S&F in repairs PVC (SWR) Floor Trap 75mm bore (dia) including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

S&F in repair stainless steel Grating Round 100mm Dia with waste hole jointing with Solvent Cement complete all as specified and directed.

S&F in repairs Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.

M&L Cutting into existing Manholes for Connecting New Drain Pipes of 150mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

Desilting/Taking out Brick Bats, Pebbles, Silts, Muds, Clay etc from bottom of Drains including Cleaning Grasses, Vegetations, etc, depth up to 3.00 Metre including removing excavated materials from the sides of Drain including removing RCC drain cover and refixing after cleaning of drain and removing debris to outside MD/AF Land where directed, complete all as specified and directed.

S&F in repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision Concrete Bedding and Making Good to disturbed surfaces complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) including plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for the cost of PVC seat cover)

S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and as directed. NOTE: This item shall only be measured for replacement of only seat cover on existing EWC.

S&F in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC flush Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3, complete all as specified and as directed.

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.

S&F in repairs Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe complete all as specified and directed.

S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and as directed.

S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square / rectangular), area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, tiles laid over and including screed bed for fixing of ceramic floor tiles in cement mortar 1:4, 15mm thick complete all as specified and directed NOTE : Cost of Cement Screed Bed shall be deemed to be included in the quoted rate.

M&L Vitrified Coloured Tiles 9-10mm thick (Square/ Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set in Neat Cement Slurry, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, laid with spacers to provide a uniform spacing of 3mm between the tiles and after setting of adhesive, removing the spacers and filling the joints with suitable epoxy grout and pointed with grout complete all as specified and directed. NOTE : Cost of cement screed bed and epoxy grout shall deemed to be included in the quoted rate.

M&L Vitrified Coloured Tiles 9-10mm thick (Square/ Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in skirting, etc. Set in Neat Cement Slurry, fixed over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, laid with spacers to provide a uniform spacing of 3mm between the tiles and after setting of adhesive, removing the spacers and filling the joints with suitable epoxy grout and pointed with grout complete all as specified and directed. NOTE : Cost of cement screed bed and epoxy grout shall deemed to be included in the quoted rate.

M&L for Coloured Glazed Ceramic Tiles in vertical surface 450mm X 350mm X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Paving, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for Cement Concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate) as in foundation filling & mass concrete, sub base of drains etc complete all as specified and directed.

M&L Cement Concrete 1:2:4 Type B1 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block etc including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, finished even and smooth without using extra cement complete all as specified and as directed.

M&L Cement Concrete 1:2:4 Type B1 (20mm graded stone aggregate) as in benching to manholes including forming channel, laid to shape and slope, etc including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, finished even and smooth using extra cement complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 type C1 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including use and waste Formwork as ordered, complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L cleaning and removing all scales and dirt from the Tank and mouth of the circulating pipes, etc. after draining out water from the Tank of capacity exc. 250 litre and n exc. 500 litre , cleaning the tank by scrubbing the deposits with Wire brush, re- Fixing Inlet and Outlet pipes in the same position and Writing Letters "CLEANED ON DD.MM.YY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.

M&L cleaning and removing all scales and dirt from the Tank and mouth of the circulating pipes, etc. after draining out water from the Tank of capacity exc. 500 litre and n exc. 1000 litre , cleaning the tank by scrubbing the deposits with Wire brush, re- Fixing Inlet and Outlet pipes in the same position and Writing Letters "CLEANED ON DD.MM.YY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.

M/s Satguru Traders (BID ID -3400933)

M/S GOYAL CONSTRUCTIONS (BID ID -3403398)

M/s Shree Bala Ji Construction Company (BID ID -3398169)

M/S Aggarwal construction co. (BID ID -3404167)