WELCOME MAINT TO VARIOUS QUARTERS OF DGQA BADARPUR AND REPAIR TO STEEL FURNITURE AT AF STN TUGHLAKABAD AND DGQA BADARPUR UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-in-Charge

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-Charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Anodized powder coated aluminium frame for doors, windows, ventilators, portion wall with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge. Note: Thikness of powder coating is 50 micron.

S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for glass pan without sash bar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified handles 1 Nos in each window, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for wire mesh without sash bar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each window, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-Charge.

S&F 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and directed by Engr-in-Charge.

S&F 4.0 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks ro galvanised wire staple complete all as specified and directed by Engr-in-Charge.

M&L for complete removing of existing treatment by scrapping with Wall Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engr-in-Charge.

M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted what after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7" or 9" to make the surface free from dust etc by skilled labour complete all as specified and directed by Engr-in-Charge. Step 1) Mix the putty powder by adding 40-50% water and mix it with Putty mixer with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of having a DC electric motor of 3.3 KW having flow speed of max 6 ltr per minutes with a maximum pressure 230 bar having maximum tip size 0.041. Step 3) Allow 6-8 hrs time to dry the putty Surface

M&L for one coat of acrylic water based interior grade primer 0.80 Ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of having an electric motor of min 1 HP with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engr-in-Charge.

M&L For applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-Charge. Note-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer Proper mashing to be carried out before primer and paint application.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

S&F for Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engr-in-Charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast , filling back side of pressed steel door frames etc complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber /frame work with rebate suitable for cupboard shutters complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.

S&F in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

Demolition of old existing loose/unsound weaken mixture of binding material such as cement and fine aggregate(<4.5mm retained on IS sieve) of any description and in any position from existing internal surface of RC components or any surface having average profundity of 15mm by hand tool that has a long metal blade with a sharp edge at end chisel and hammer or user robust pneumatic chisel/hand tools and removal from MoD land including M&L for applying one coat of mixture of two monomer unsaturated liquid hydrocarbon and gaseous hydrocarbon and polymesrized them to get the high polymer dispersion emulsion can be successfully bond to cement mortar, which improved adhesion to concrete, offers the better durability, reduces the shrinkage and increase the flexibility and resistant to emulsification oin damp condition modified. Ensuring no porosity in new/old surface on dilapidated girders or reinforcement encased in concrete complete all as specified and directed by Engr-in-Charge.

M&L for applying hydraulic binders, osmotic and complexing admixture passivation additives passivating protective matrix and welded MS wire cloth weigh not less than 1Kg/Sqm with 20mm thick one component chloride free shear thinning fibre reinforced polymer modified, additives reduce or eliminate internal rust and corrosion by neutralizing acids and forming a chemical protective barrier to repel moisture from metal surface corrosion inhibiting additive, primer MUCIS for exposed corroded visible steel forming a continuous film not less than 250 micron of single component conforming to EN 1504-7-2006 and preparing the surface to receive the bled of epoxy and sand including providing necessary proportions complete all as specified and directed by Engr-in-Charge.

M&L for taking out old broken glass of any description from old wooden or metal frame,or stones, concrete or brick surrounds glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

S&F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

S&F in repair PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including, waste fitting and union complete all as specified and directed by Engr-in-Charge.

S&F in repair pillar tap cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed with 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engr-in-Charge.

S&F in repair angle valves CP screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F in repair of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-Charge.

S&F in repair bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 125mm dia grating doom with/without waste hole of chromium plated complete all as specified and directed by Engr-in-Charge.

S&F in repair for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-Charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slurry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

Taking down or up 15 mm bore galvanised iron tubing and connection and S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-Charge.

All as per serial item 57 here in before but 20 mm bore complete all as specified and directed by Engr-in-Charge.

Taking down and refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed by Engr-in-Charge.

All as per serial item 59 here in before but 20 mm bore complete all as specified and directed by Engr-in-Charge.

M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-Charge.

M&L for rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down Cement plaster and raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smooth without using extra cement including taking down Cement plaster and raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note: Disposal of all demolished material from outside the MOD land. All works to be carried out up to Approx 12 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 12 mtr height from ground floor. No extra claim by the contractor for same. All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling even and smooth without using extra cement including taking down Cement plaster and raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and apply three coat white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Ditto- as per item No 67 above but two coat of cement base paint on new wall surface complete all as specified and directed by Engr-in charge.

M&L for making good broken edges of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 10 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including dismantling and hoisted and fixed in position etc complete all as specified and directed by Engr-in-Charge.

S&F 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including dismantling and hoisted and fixed in position etc complete all as specified and directed by Engr-in-Charge.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) etc complete all as specified and directed by Engr-in-Charge.

S&F in repair gun metal gate valves with iron wheel head 20 mm complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair 1.00 mtr long Aluminiumn door seal width of 1.50 inch with nylon brush fitted with screw complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pal (pedestal pattern) white (excluding fixing bolts flushing cistern and slush pipe) with seat cover with CP screw complete all as specified and directed by Engr-in-Charge.

S&F in repair A Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repair existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-Charge.

S&F in repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair of wall mixture 15 mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair Basin mixture 15 mm bore dia cast copper alloy with cap capstan chromium plated screwed down high pressure with or without "Hot" or "Cold" long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs 2 way angle cock double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of Cement base paint of approved tint, complete all as specified and directed by Engr-in-Charge. Note :- All works to be carried out up to Approx 12 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 12 mtr height from ground floor. No extra claim by the contractor for same.

M&L for preparation of plastered or unplastered old surfaces of walls and filling cracks hole by applying walls and ceiling putty (multipurpose mixer will be user for uniform and proper mixing of putty) and applying one coat of distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary complete all as specified and directed by Engr-in-Charge. Note: Work will executed by mechanized means/tools as required for smart periodicals services

M&L for preparation of old plastered surfaces of walls and one coat white wash on ceilings complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No 89 above but on steel surface over 10 cm or girth complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel kitchen rack plate rack overall size 24" x30" complete all as specified and directed by Engr-in-Charge.

Charpoy GI pipe (FD-220) Taking out unserviceable/ broken long rail from Charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken short rail from Charpoy GI pipe and fixing short rail made out of long rails retrieved out of Srl Item 1 above as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken leg from Charpoy GI pipe and fixing leg made out of short rails retrieved out of Srl Item No 2 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken 3 way elbow from Charpoy GI pipe and S&F new 3 way elbow of 32mm bore ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken GI check nut from Charpoy GI pipe and S&F new check nut of 6mm thick 32mm bore as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable plastic/nylon newar from charpoy GI pipe and S&F Plywood of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with suitable flat headed bolt, nut and washers 08 Nos of suitable size as per requirement including provision of 02 Nos stiffeners made out of 35x6mm flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex. All as specified and directed by Engr-in-Charge.

Taking out unserviceable ply top from charpoy GI pipe and S&F of new Ply of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with flat headed bolt, nut and washers 08 Nos of suitable size as per ground requirement including provision of 02 Nos stiffeners shall be provided made out of 35x6mm Flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex all. All as specified and directed by Engr-in-Charge.

Teapoy Verandah (FD-383, 255) & FD/E6/MAP/17 Taking out unserviceable top from Teapoy verandah and S&F new top made out of pre-laminated particle board both side white shade exterior grade 18mm thick including 4mm thick teak wood beading all around the top as per existing shape & size complete all as shown in drg & directed by the Engr-in-Charge.

Taking out unserviceable rubber shoes from leg of Teapoy verandah and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Table office clerk steel (FD-84 & 1004) Taking out of unserviceable top from Table office clerk steel and S&F new top made out of pre-laminated particle board of one side teak face, exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawer from the Table office clerk steel and S&F new drawer made out of 1mm thick mild steel sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable lock from the table office clerk steel and S&F new brass lock of 04 levers with duplicate key complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable rubber shoes from the legs of Table office clerk steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.

Table office Officer steel (FD-84 & 1003) Taking out unserviceable top from the Table office officer steel and S&F new top made out of pre-laminated particle board of one side teak face exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawer from Table office officer steel and S&F new drawer made out of 1mm thick MS sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable lock from the table office officer steel and S&F new brass lock of of 04 levers with duplicate key complete. All as shown in drg.

Taking out unserviceable rubber shoes from the leg of Table office officer steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Stool revolving steel adjustable (FD-103) Taking out unserviceable mild steel plate from stool and S&F new mild steel plate of 100mm dia 6mm thick by way of welding as per the existing shape & size duly applying two or more coats of approved paint to match with the existing complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable seat from stool revolving steel adjustable and S&F new seat made out of seasoned hard wood 38mm dia of 25mm thick with foam having 32 density of 50mm thick duly covered with approved rexene cloth of 1.2 mm thick of cost not less than Rs 125.00 per Sqm shall be used in seat as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable rubber shoe from leg of stool revolving steel adjustable and S&F new rubber shoe (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.

Almirah large /Medium steel with shelves (FD-67,1031 & 1032) Taking out the unserviceable lock from the Almirah large/ medium steel and S&F new brass lock, six levers godrej pattern with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Almirah large/medium steel and S&F new handle of chromium plated of CP size 100mm long with 25mm long steel pin, to make 3 way locking system operational, of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable steel clamp from the almirah large/medium steel and S&F new steel clamp including fixing of loose shelves as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah large steel and S&F new 3 way locking device including MS rod 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah medium steel and S&F new 3 way locking device including MS rod of 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Cabinet filing Steel /Cabinet to hold cards/cabinet cordex steel (FD-67) Taking out unserviceable handle from the cabinet and S&F new handle chromium plated size 100mm long of approved quality complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable lock from cabinet and S&F new brass lock of six levers with duplicate key as per trade pattern including repair to complete locking device with rolling function smoothly complete all as specified and directed by Engr-in-Charge.

Chair revolving lab cum computer with or without arm/off size/any type (TP) Taking out unserviceable wheel Base from any type of chair revolving and S&F new wheel base of different types as per trade pattern with existing shape & size of 600 to 650 material complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as per trade pattern to make the chair functional as per existing shape and size complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable tapestry cloth, foam cushion and plywood from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade of cost not less than 250 per Sqm including replacement of the foam cushion of 75 mm thick and 12mm thick plywood etc. as required complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair revolving and S&F new hand rests (set of 02 Nos for left and right each) as per the trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge.

Chair office/visitor / Executive (TP) Taking out unserviceable tapestry cloth from seat & back of chair office/visitor and S&F new tapestry cloth of approved quality & shade of cost not less than Rs 250.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair Office/visitor and S&F new hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge.

Chair revolving office officers high back with PU arm (TP) Taking out unserviceable wheel base from any type of chair revolving and S&F new wheel base as per trade pattern made out of metallic powder coated & metal base and the existing complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as required as per trade pattern and the existing to make the chair functional complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable Leathrite or tapestry cloth from seat & back of chair revolving and S&F new Leathrite or tapestry cloth of approved quality & shade of cost not less than Rs 300.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required as per the existing complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair revolving and S&F new of hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge..

Book case steel (FD-90 & 1028) Taking out unserviceable lock from Book case steel and S&F new six lever brass lock with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Book case steel and S&F new chormium plated steel handle of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable glass from the Book case steel and S&F new plain glass of 4mm thick of approved quality matching with the existing glass complete all shown in drg and directed by Engr-in-Charge.

Locker bed side steel (FD-257 &1029) Taking out unserviceable hasp & staple from Locker bed side steel and S&F new hasp and staple of size 75x40x4mm of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Locker bed side steel and S&F new chromium plated steel bow handle of 100mm long of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable hanging rod from the Locker bed side steel and S&F new chromium plated steel hanging rod of 19mm dia approved quality complete all shown in drg and directed by Engr-in-Charge.

Chair tubular steel with and without arms (FD-75) Taking out the unserviceable seat from chair tubular steel and S&F new seat made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable back from the chair tubular steel and S&F new back made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable flat iron from the chair tubular steel and S&F new flat iron of size 25x3mm as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hand rests from chair tubular steel and S&F new hand rests (Set of 02 Nos) made out of hard wood shisham of existing size duly applying two or more coats or french polish of in required shade complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable Caps and rubber shoes from chair tubular steel and S&F new caps & rubber shoes (Set of 02 Nos Caps and 04 Nos rubber shoes) of best quality matching with the existing complete all shown in drg and directed by Engr-in-Charge.

CHAIR VARANDAH Taking out the unserviceable leg from the chair verandah and S&F new leg (front or rear leg) made out of 19mm MS Tube of 1.6 mm wall thickness along with hard rubber shoes at the bottom of legs complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable mild steel round bar from front and back side and S&F new mild steel Bar round of 10 mm dia shall be welded to both front and back side legs of chair Varandah complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hard rubber shoe from chair verandah and S&F new rubber shoe (Set of 04 Nos) of approved quality in white colour complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable cane from the chair verandah, supply & re-canning with new cane of 4mm wide as per Mat pattern complete all shown in drg and directed by Engr-in-Charge.

Table laboratory cum work bench size 2000x1000x1350mm /1500x1000x800mm (TP) Taking out U/S drawers from table laboratory cum work bench and S&F new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR including knob etc. All as directed by Engineer-in-Charge.

Taking out U/S shutter from table laboratory cum work bench and S&F new shutter made of 19mm thick block board commercial exterior grade BWR duly covered with 4mm thick teak wood edging all around the shutter including piano type hinges 19mm wide, knob as directed by GE/ Engineer-in-Charge matching with the existing shape &p size.

Taking out U/S rubber shoe from Table laboratory cum work bench and S & F new rubber shoe of best quality matching with the existing shape & size.

Taking out U/S Top from table laboratory cum work bench and S&F new top made of 19mm thick block board commercial exterior grade BWR paste in double duly fixed laminated sheet in required shade and covered with aluminum channel of size 40x40mm 2mm thick all around the top. All as directed by Engineer-in-Charge.

Finish:-Painting of complete Table Lab cum work bench after removing of all dent/rust by scratching & applying one coat Synathic Enameled paint colour as approved by Engr-In-Charge

M&L for preparation of old painted surfaces by rubbing down with emery paper clean thoroughly to remove all dust/oily spots, dentings etc and applying one coat of synthetic enamel paint of existing shade with mechanical spray gun of all sides and inside with shelves door shutters for Almirah large steel complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 148.00 but for Steel Almirah medium size.

All as per Sl item No 148.00 but for Steel Book case.

All as per Sl item No 148.00 but for Teapoy verandah.

All as per Sl item No 148.00 but for Table office clerk.

All as per Sl item No 148.00 but for Table office officer.

All as per Sl item No 148.00 but for Steel Locker bedside.

All as per Sl item No 148.00 but for Steel Chair tubular.

All as per Sl item No 148.00 but for Chair verandah.

Table dining 8 persons (FD-239, 273 & 376) Taking out unserviceable top from table dining 8 persons and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from table dining 8 persons and S&F new leg made out of well seasoned teak wood as per the existing shape & size (set of 04 Nos) complete including PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from table dining 8 persons and S&F new long rail made out of well seasoned teak wood as per the existing shape & size (set of 02 Nos) complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable short rail from table dining 8 persons and S&F new short rail made out of well seasoned teak wood as per the existing shape & size (set of 02 Nos) complete all as shown in drg and directed by Engr-in-Charge.

S&F of new bracket 100mm triangular on two sides shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs (set of 08 Nos to each table) all as directed by GE/Engr-in-charge.

Table Centre (FD-274) Taking out unserviceable top from table centre and S&F new top made out of pre-laminated particle board one side teak face exterior grade of BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from the table and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable top rail from the table and S&F new top rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

S&F of new bracket of 50mm triangular on two sides shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and (legs set of 08 Nos to each table) all as directed by GE/Engr-in-charge.

Sofa set to seat five (FD-281) Taking out the torn out unserviceable cushion set of one seat & one back from Sofa set (FD-281) and supply new foam cushion set made of superior quality cushion of 40 density 100mm thick of size 530x560mm including tapestry cloth cover stiched on all sides with tapestry cloth of approved shade/texture costing not less than Rs 450/- per Sqm complete all as shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable long rail from the sofa set of three seater (FD-281) and S&F of new long rail made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

Taking out the unserviceable short rail from the sofa set three seater (FD-281) and S&F of new short rail made out of well seasoned first class hard wood without changing the shape and dimensions complete all as per drg

Taking out the unserviceable legs from sofa set of three seater (FD-281) and S&F of new leg made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

Taking out the unserviceable strip from the back of sofa set three seated (FD-281) and S&F of new strip made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

M&L for preparation of old polished wooden surfaces duly scrapping the old polish completely with chemical/emery paper & cleaning the old surface. Applying polish to get perfect glossy finish duly applying two or more coats of french polish to three seater Sofa set complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 171 but for Table dining 8 persons.

All as per Sl item No 171 but for Table centre.

M/S S.K.Electricals (BID ID -3324627)