Providing toilet and bathing arrangements for the construction of Fire and Rescue Service station at Rayakottai in Krishnagiri District.

EW-AS-NC-IR: Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

EW-SDR-NC-IR:Earth work excavation for foundation in soft disintegrated rock, soft laterite rock or Kankar soft rock not requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150 mm thick layers

FL-FB-EA Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick well watered rammed and consolidated complying with relevant standard specification etc

Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

PA-CE-WW-SL 3C White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects.

MW-MS-GR Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete

PA-Ex-IW-2C EP Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost.

WS-EX-WST-HDPE Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

WS-EX-ASTM-PVC Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 a) 32mm dia

b) 25mm dia

EL-IN-EP-PS Supplying and fixing 15amps 3 pin plug type socket on a suitable size PVC box (Fire retraded box) of required thickness concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials.

ST-FB&S-PC-AT Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete.

FL-FB-GR supplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications

FL-FB-SCS supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness

CN-FB-PCC-1:5:10 Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc.

BW-FB-KB-CM 1:5 Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement

CN-F&S-RCC-M20 Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works a) In Foundation and basement

b) In Ground Floor

BW-MW-KB-CM 1:6 Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure b. In Stilt / Ground Floor

BW-PW 114mm-KB-CM 1:4 Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors b. In Stilt / Ground Floor

FW-FW-WOS-RCC Providing Form work and centering for reinforced cement concrete works including supports a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

FW-SS-WS-PS b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

FW-SS-WS-CO c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

JN-PVC D-SL-L Providing and fixing factory made polyvinyl chloride ( PVC ) Door Frame of size 50X47mm with a wall thickness of 5mm, made out extruded 5mm rigid UPVC foam sheet, mitred at two corners and joined with 2 nos of 150mm long brackets of 15X15mm M.S square tube. The two vertical and horizontal door profiles are to be reinforced with 19X19mm M.S Square tube of 19 gauge with primer coat

CN-FL-PCC-1:5:10 Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

PL-FL-CM 1:4-20mm Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

TL-WL-GZT-CM 1:2 Supplying and fixing of Colour glazed tiles over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

TL-FL-CT-CM 1:3 Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

PL-OU-CM 1:5-12mm Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PL-CL-CM 1:3-10mm thick Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PL-OU-CM 1:5-Bor Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border b) 75mm wide border

c) 50mm wide border

PA-IN-PEP-2C BPC Painting the false ceilling / New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc

PA-Ex-EEP-2C BPC Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc

RE-RTS-Fe-NC Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., all complete and as directed by the departmental officers.

WS-IN-HW-20 UPVC Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials b. 20mm dia UPVC pipe

SA-IN-WB-P Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories

WS-IN-CP-LBT Supplying and fixing of 15mm dia C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc,

WS-IN-HCP-SBT Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc

SA-IN-IWC-GF Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) In Ground floor.

SA-IN-EWC-W Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap including cost

SA-Ex-SWR P-Dia Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA-Ex-SWR P-75 b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA-IN-NT-PVC Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications

SA-Ex-SN8-Dia Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety a. 110 mm UPVC Non Pressure pipe

EL-IN-EP-LP Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable a) Light point with ceiling rose

b) Light point with bakelite pattern type holder

EL-IN-WR-2x2.5m2 Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable

EL-IN-EF-EF Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality 225 mm dia sweep AC exhaust fan

IN-FT-BM-PVC supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size shelf type mounted in the PVC/ FIBRE GLASS FRAMED with necessary hard board backing including labour for fixing in position etc, b) 600mmx450mm shelf type

EL-IN-LED.F-LB Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. a) 9 watts LED bulb

EL-IN-LED.F-TL Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position etc.

EL-IN-EF-BH Supplying and fixing of water tight 15 watts bulb for Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc.,

Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. b) 15 watts LED bulb

EL-EX-EF-SL Supply and fixing of 25 W LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet

Supplying and fixing of CP Two Way Bip Cock with health Faucet approved quality ISI mark including cost of material all accessories and Labour charges for fixing in position etc.,

CN-TEC-WC-NS Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab with proportion of brick jelly to lime (fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters for giving the required slope and thickness complying with relevant standard specification

TL-RO-PT-CM 1:3 Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick

WS-EX-RWD-PVC Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe b. 110mm dia PVC SWR pipe

Please Enable Macros to View BoQ information