Karnataka

Active

Works

Buildings

Construction of external stairs and installation of sheet roofing & Providing furnitures for PWD circuit house building in Udupi.

Public Works Department

PWD Division Office Udupi | Udupi, Karnataka

Amount: ₹6.7 LCloses: 15 Sept 20264d left

Timeline

Published29 Aug 2026
Closes15 Sept 2026

Tender Value

₹6.7 L

EMD Value

₹16,900

Closing Date

15 Sept 2026, 5:30 pm4d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Shanta Patgar

Office Number

Mobile Number

Work Description

Construction of external stairs and installation of sheet roofing & Providing furnitures for PWD circuit house building in Udupi.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT40051

Reference Number

PWD/2026-27/BD/WORK_INDENT40051

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Udupi

Source Website

Subscribe to view

Documents Required

3 documents required · 3 mandatory

Technical Bid

RequiredTo qualify for award of this contract, each tenderer in his,her name should have in the last five years period i.e. 2021-22 to 2025-26 and achieved in at least Two financial years an average annual financial turnover of Rs. 6.75 Lakhs attach annual turn over certificate along with profit and loss statement from CA.

RequiredKPWD Class-IV and above Registeration Certificate

RequiredGST Declaration certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor should be registered with KPWD class-IV and above Registration

Conditional tenders are not accepted

The employer reserves the right to reject one and all tenders without assigning any reason there of

The employer is not responsible for any delay in accessing E- procurement portal

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender

PERFORMANCE SECURITY The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the contract price, security for unbalanced tender shall be provided within 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of Bankers Cheque,D.D,Pay order Bank in the nature of EXECUTIVE ENGINEER PWD Udupi Division

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Contractors should follow strictly prevailing rules of labour act.

In case of the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work

The tenderer should bear all cost associated with the preparation and submission of his tender and the employer will in no case be resposble and liable for those cost.The cost of the tender form shall not be refundable

The Successful bidder has to fallow the prevailing Government orders regarding royalty Charges. The contractor has to submit Material Dispatch Permit (MDP) for all naturally available Resources/ Materials along with the running contract bills, otherwise necessary action will be taken as per GO/Circulars

The contractor has to quote the same rate to the same repeated items of work with same rate (same item code and rate) that has to be executed at different chainages If in case, the contractor quotes different rates for the same repeated items with the same rate appearing in BOQ then, the lowest quoted rate for the same repeated items will be considered for that particular item for evaluation and payment.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore, amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender , tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, contractor shall quote the rate excluding GST and GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

Rates are Including cost and conveyance of all materials with all lead and lift, loading and unloading, usage of Machinery and equipments, transportation charges, curing, labour charges and all other incidental charges etc., complete as per standard technical specification, design and directions of the Engineer incharge of work

Contractor shall bare the expenditure/charges towards design mix paid to quality control sub division

As per G.O.letter No:AD417 expenditure 12 2024 Dated 9.8.2024 tender called excluding GST

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹16,900

Important Dates

Last Activity

4 Sept 2026

Published

29 Aug 2026

Download Ends

11 Sept 2026

BOQ Preview

•

Construction of external stairs and installation of sheet roofing & Providing furnitures for PWD circuit house building in Udupi

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including cost and conveyance of all materials with all lead and lift, loadin...

•

Providing and laying 500x500x40 mm thick Turf paver on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick fine sand, incl...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing precoated galvanised steel sheet roofing accessories

•

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per di...

•

Providing and supplying pillow polyester fibre with good sleeping

•

comfort of size 60cm x 40cm as per direction of engineer in charge ---- including cost and conveyance of all materials with a...

•

Providing & supplying 100% Polyester machine wash capable blanket 66x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materi...

•

Providing & supplying 100% Polyester machine wash capable blanket 80x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materi...

•

Teak Wood Sunrise Cot Single : Of size 6.5'x3'. Made out of Teak wood leg size 2"x3" . Side bars 4"x1.5". Leg side height 18". Head side 33". Head and leg side Teak wood patti. Cot shall be neatly fin...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GST declaration.pdf

Instructions to Tenderers • 0.34 MB

Roof sheet PWD circuit house-40051.doc

Tender Document • 0.19 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .