Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | L1 | Accepted-AOC 1st lowest bidder | |
| 2 | Rejected-Technical | - | Rejected-Technical Not qualified as per clause no. 2.7 of NIT | |
| 3 | Rejected-Technical VPO SHARA SANDHAR TEHSIL BASHOLI DISTT KATHUA J K | KATHUA | JAMMU AND KASHMIR | 184101 | - | Rejected-Technical Technically non responsive and not qualified |
Tender Value
₹5.2 L
EMD Value
₹10,000
Closing Date
27 Feb 2020, 4:00 pmClosed
Senior Manager (Contracts)
Contracts Division, Sewa-II Power Station, Mashka, District-Kathua, Jammu and Kashmir, P.B. No. 2, P.O. Khairi, District-Chamba, Himachal Pradesh, PIN 176325.
Construction of a new Community Centre complex including 02 nos Toilets at Khaddi Panchayat, Tehsil - Basohli, District-Kathua, J and K (CSR-406)
2020_NHPC_535945_1
NH/Sewa-II/Cont/CSR406/2020/48
Open Tender
Civil Works - Buildings
Works
90 days
Khaddi Panchayat, Teh. Basohli, Distt. Kathua
Please refer tender documents
5 documents required · 5 mandatory
₹590
Yes
NHPC Limited, Sewa-II Power Station
₹10,000
Yes
28 Mar 2020
15 Jan 2020
3 Mar 2020
15 Jan 2020
27 Feb 2020
15 Jan 2020
Amount
Earth work in excavation in foundations, trenches or drains(not exceeding 1.5 m in width ) an d for shaft, wells, cess pits and the like not exceeding 10sqm on plan depth upto 1.5m including disposal of excavated up to 1 m from cutting edge disposed earth to levelled and neatly dressed (All kinds of soil)
P/L in position cement concrete of specified grade excluding the cost of centering & shuttering - all work upto the plinth level. 1:3:6( 1 cement:3 coarse sand:6 graded stone aggregate 20mm. Nominal size.(a) Crushed
P/L in position cement concrete of specified grade excluding the cost of centering & shuttering - all work upto the plinth level. 1:2:4( 1 cement:2 coarse sand:4 graded stone aggregate 20mm. Nominal size.Crushed agg
Random rubble masonary,with hard stone in foundation and plinth including levelling up with cement concrete 1 :6 :12( 1 cement :6 coarse sand : 12 graded stone aggregate 20 mm nominal size at plinth level with cement mortar 1:6 (1 cement : 6 fine sand )
Providing and laying damp proof coarse 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates 20mm nominal size).b) Crushed agg
Boulder filling dry hand packed
Supply and filling in plinth with fine sand under floor including watering, ramping, consolidating and dressing complete
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth l in cement mortor 1:6 (1 Cement : 6 fine sand)
Extra for brick work in superstructure above l pinth level upto floor v level (by manual means)
Centring and shuttering including strutting propping etc. and removal of form for Suspended floors roofs landings, balconies and access plateform.
Centring and shuttering including strutting propping etc. and removal of form forEdges of slabs and breaks in floors and walls Under 20 cms walls
Centering,shuttering strutting,proping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15, landings , balconies,shelves, chajjas, lintels, bands,plan window sills, stair casses and spiral stair casses upto floor five level ex-cluding the cost of centring shuttering finishing and reinforcement with 1:2:4 ( 1 cement :2 coars sand :4 graded stone aggreagate 20 mm normal size.
Reinforcement for R.C.C.work including straightening,cutting, bending, placing in position and binding all complete. THERMO-MECHANICALLY TREATED BARS
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth
Structural steel work welded in built up sections, trusses and framed work, fixed including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing 1st quality ceramic glazed Tiles conforming to IS. 13753 of minimum 5mm thickness of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dado over 12 mm thick bed of cement mortar 1: 3 ( 1cement : 3 coarse sand ) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 1st quality ceramic glazed floor 300 x300 Tiles conforming to IS. 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour such as White.Ivory, fume red , Brown laid on 20mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand ) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand)
6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand)
Finishing walls with Acrylic smooth exterior paint of required shade ; New work ( two or more coats applied @1.67 litres/10sqm over and including base coat of water proofing cement paint applied @2.2 kg/10sqm
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.New work (two or more coats) over and including priming coat with cement primer.
Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two of more coats)
P/F to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19x19mm for styles top and bottom rails, MS frame shall have a coat of steel primers of approved make
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltscurved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washersor with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate .(a) Crushed
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 100 mm diameter.Phinolex made
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 15mm
Poviding and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 20mm
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20mm nominal bore
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
P/F C.P. Brass Bib cock of approved quality confirming to IS 8931, 15mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex)
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. each
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .