SPL REPAIR OF PIPELINE OF BATHROOM AND COOK HOUSE OF BLDG NO P-261, P-266 AND P-271 UNDER GE (WEST), DELHI CANTT-10

Amount

Dismantling wrought iron or mild steel or similar work of any description not otherwise provided for complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning or removal from the site of work complete all as specified and directed by Engr-in-Charge.

All as per item No 2 above but 20mm dia complete all as specified and directed.

All as per item No 2 above but 25mm dia complete all as specified and directed.

All as per item No 2 above but 40mm dia complete all as specified and directed.

Taking down cement or cement lime plaster, any description, any thickness on ceiling or brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete including floor finishes and lime concrete of any description in any position complete all as specified and directed.

Dismantling of spun pipe/Cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches or walls or slabs, if required complete all as specified & directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar/lime mortar in any position/situation of wall/parapets complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan 'Orissa' pattern,size 580X440mm, white, with intergral foot rests (excluding flushing cistern and flush pipe) including connection to trap & to flushing pipe,anti syphonage pipe etc including making good to floor to match with adjoining area complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size incl making necessary connection to water supply pipeline, including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous chinaware under counter wash hand basin (WHB), white, oval shape size 560x480x150mm complete including provision of 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting hole in granite slab for fixing of WHB and Pillar cock etc including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia swan neck fancy type pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified and directed.

S&F in repair for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F for Vitreous China ceramic gents Urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including CP angle of 15mm bore and Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm- 45gms for urinal), complete all as specified and directed.

S&F in repair 15mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore dia pipe stope valve/angle valve chromium plated fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed.

S&F galvanized steel tubing, 15mm bore, medium grade including all fittings and short pieces, fixed complete to walls and ceiling or laid in floors, complete all including cutting chased for concealed pipe line complete all as specified and directed by Engr-in-Charge.

All as per item No 23 above but 20mm bore tubing complete all as specified and directed.

Refixing only 20mm steel tubes, any grade, to walls and ceilings or laying complete all as specified and directed.

All as per item No 23 above but 25mm bore tubing complete all as specified and directed.

Refixing only 25mm steel tubes, any grade, to walls and ceilings or laying complete all as specified and directed.

All as per item No 23 above but 40mm bore tubing complete all as specified and directed.

Refixing only 40mm steel tubes, any grade, to walls and ceilings or laying complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 6 to 7 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 300x450x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Screed bed or bedding layer of mortar 10 mm thick in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in Cement Mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rough cast plaster after applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick cement plaster in Cement Mortar 1:3 on brick work or concrete surfaces finished even and smooth as in ceiling surface (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M&L for aplying two coat of cement base paint including preparation of new surface of wall complete all as specified and directed.

M&L for applying three coat of white wash on new plastered surface of wall including preparation of surface complete all as specified and directed.

M&L for applying three coat of white wash on new plastered surface of ceiling including preparation of surface complete all as specified and directed.

S&F in repair 100mm bore spun pipe waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete all as specified and directed.

All as per Item No 39 above but except pipes complete all as specified and directed.

M&L cast iron floor trap 75mm outlet diameter long body with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

All as per Item No 41 above but exept traps complete all as specified and directed.

M&L salt glazed stone ware gully traps 150x150mm , square mouth "P" type including cast iron grating and fixed, including necessary excavation and earth work, concrete in bed, surrounds, kerbs etc and jointing to drain in cement mortar 1:1 complete all as specified and directed.

S&F in repair 100 mm bore dia Cast iron cowls complete all as specified and directed.

S&F 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joint complete all as specified and directed.

S&F in repair 100mm Bends with oval acess door (any radius), diminishing pieces or tapers (larger bore measured) with cement joint complete all as specified and directed.

S&F in repair 75 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm Bends with oval acess door (any radius), diminishing pieces or tapers (larger bore measured) with cement joint complete all as specified and directed.

S&F in repair 75mm bore dia cast iron Branch pieces , single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in repair 100mm Cast iron Single 'Y' junctions laid and jointed, complete all as specified and directed.

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L for providing lead joints in lieu of cement joints for CI pipes embeded in masonary or concrete complete all as specified and directed.

S&F for 18-20mm thick Black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, counter slab for WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting holes for fixing WHB and Pillar tap etc complete all as specified and directed.

M&L for Marble work (table rubbed and polished) for urinal partition /wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, in Cement Mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

Refixing of Chowkats with shutters (without taking shutter from frame) of any description n. exc 1.50 sq. m in other opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube, edges will be painted to match with printed sheet, supplying and fixing in opening as per specification & drawings and making good damaged jambs complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain printed PVC `C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) of exposed portion of PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per specification and drawings complete all as specified and directed by Engr-in-Charge.

M&L for 1000Ltr capacity Rotational moulded polyethylene water storage tanks tripple layers white colour (cylindrical vertical with closed top) hoisted and fixed in position including all necessary tank connection and cover,reducer, 25mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed including dismantling of water tank complete all as specified and directed.

All as per Item No 59 above but except water storage tank complete all as specified and directed.

S&F in repair 5mm thick rounded and polished edge looking mirror mounted on 6mm thick AC building board or commercial plywood and fixed to wooded plugs with chromium plated brass scruew and cup washers size of each mirror exc 0.40 sqm but not exc 1 sqm complete all as specified and directed.

Demolition of reinforced cement concrete of any description and any position not otherwise mentioned complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to rough finish surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm rough finish surface of oncrete complete all as specified and directed.

S&F mild steel deformed or twisted TMT bars 10mm dia and over cut to length bent to shape required including cranking bending etc and binding with mild steel wire (annealed) not less than 0.1mm dia complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. (Rate of WPC shall be included in unit rate)

M&L for rendering 10mm thick in Cement Mortar 1:3 on fair face of wall and conrete surface in sunken floor reatment using water proofing compound complete all as specified and directed.

M&L for supply and apply glass fibre reiforced acrylic modified cementitius coating system in sunken floor treatment on floor and wall including cleaning the surface bt air compressor to remove loose particle, grinding any sharp edge and sealing/treating the pipe penetration surface of wall by applying solvent free, moisture intensive epoxy resing based patch repair putty (Sika gand 694) with 20mm thickness around the hole complete all as specified and directed as per manufacturer instruction:- Base coat : Sika Top® Seal- 107 Consumption base coat 1.50Kg/sqm Reinforcement Sika® Fab-1 Top Coat :Sika Top® Seal-107 Consumption top coat :1.5Kg/sqm System requirement : density 2.00 Kg/Ltr Comprssive Strength 20N/mm2 Bond strength :2.0 N/mm2 Water to be use : Potable water (Note: Ponding test for leakage/seepage will be carried out by filling the sunken floor with water for a period of 72 hours by the contractor in the quoted rate.) Make: Ms Sika India Pvt Ltd or equivalent in Ms Fosroc Chemicals/ Ms STP Limited as approved by GE

M&L for cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in filling sunken floor complete all as specified and directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement with roduct Sika Rust Off 100 or equivalent in Fosroc/ STP limited and apply a epoxy based zinc rich rebar corrosion protection system with product Friazinc R or equivalent and finally mixing and applying two component epoxy resin concrete bonding coat with product Sikadur-32 LP or equivalent on prepared RCC surface as in ceiling, chajjas, slab, column, beam etc as per manufacture specification including preparation of surface by chipping and thoroughly cleaning of surfaces wherever required complete all as specified and directed by Engg-in-charge.

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit complete all as specified and directed by Engr-in-charge for the following :-

One light/fan/Exhaust fan/bell point controlled by one switch.

One 5 Amp socket out let on independent board.

One 5 Amp socket out let on same board

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of syenthetic enamelled black paint with new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board complete all as specified and directed.

S&F in repair switch Piano flush type SP, one way 5 Amps complete all as specified and directed.

S&F in repair switch Piano flush type SP, one way 15 Amps complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type complete all as specified and directed.

S&F in repair celling rose 65x50 mm bakelite 2 to 3 terminal with bakelite body complete suitable for 25 volt complete all as specified and directed.

S & F in replacement Lamp holder with insulated body with back plate suitable for batten fitting complete all as specified and directed.

S&F in replacement of 7 Watt LED vlamp 6500K complete all as specified and directed. Make: Havells Cat Part No: LHLDERUEML 8X007 or equivalent in Bajaj/ C&S Electric/ Philips/ Crompton Greaves/ Polycab/ Halonix

S & F in replacement Building Street light fitting new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 45W LED 5700k roadway luminaire with high power LEDs as light source and electronic driver along with a bracket of G.I pipe suitable of size NBV having approx length of 1.5 M bent to shape and fixed to wall with clamps, nut bolts etc of approxiate size complete all as specified and directed. Make: Havells Cat Part No: LHETAXUU7PN6J045 or equivalent in Bajaj/ C&S Electric/ Philips/ Crompton Greaves/ Polycab/ Halonix

Supply and Fixing in replacement Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated 20W LED 6000K (4 ft.)With LED Tube Rod complete all as specified and directed. Make: Havells Cat Part No. LHEXBXPNINN1W020 or equivalent in Bajaj/ C&S Electric/ Philips/ Crompton Greaves/ Polycab/ Halonix

Supply and Fixing in replacement Surface mounting 9W LED mirror light fitting of 2 ft length connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed.

Supply and fixing factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs complete all as specified and directed. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete and conforming to IS: 8623 alongwith cable end box for above DB complete all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply & Fixing in repair single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 'B' curve 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F in repair SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable conforming to IS 8828 of 1996 complete all as specified and directed.

Supply & Fixing in repair single pole MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 'B' curve 10 KA breaking capacity and terminal box suitable upto 25 sqmm cable conforming to IS 8828 of 1996 complete all as specified and directed.

Supply & Fixing in repair MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified and directed.

Taking dowan sub main wiring off any sizes complete all as specified and directed.

S&F submain concealed wiring alongwith earth wire with 2 runs of 6 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of multistranded unsheathed colour code FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of size 25 mm dia with all fittings and accessories complete all as specified and directed.

Supply & Fixing in repair ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F Exhaust fan metallic type ventilating single phase 230/240V of 300mm sweep including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.

Taking down existing ceiling fan, sealing cable end dismantling blades and Rewinding of ceiling fan motor, painting with synthetic enamel paint by spraying andwriting MES Number including filling cavities with filler one coat after cleaning, hanging , connecting up and provision of cable from ceiling rose or connector to fan complete all as specified and directed.

SAAZ ENTERPRISES