Upgradation of Tribal Residential School at Topslip

Improvement of Boys Hostel Building for School at Topslip in Ulandy Range

Dismantling the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Dadooing the walls with colour Glazed Tiles of size 300 x 600 x7 mm best quality in Cement Mortar 1:2 and pointed with same colour cement neatly to full depth of tiles

Supplying and fixing in position of of colour glazed Indian WATER CLOSET with "P" or "S" strap including all internal fittings fixed to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Supplying and fixing in position Indian make Wash Hand Basin of size 550 x 400mm of approved quality

Providing and fixing outlet P.V.C. pipes of 110mm dia with necessary shoes, bend and specials clamps,nails. Teakwood plugs

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Supplying fabrication and placing in position steel rods for reinforced including cost of steel all works

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Plastering in cement Mortar 1:5-12 mm thick including cost and conveyance of all materials at site labour charges curing etc…, complete

Finishing with in Cement Mortar 1:5 -20 mm Thick including cost and conveyance of all materials at site labour charges curing etc .., complete

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Painting two coats plastered surface with two coats of emulsion paint over one coat of emulsion primer

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Reparing country wood fully paneled door single leaf

Repairing country wood partly glazed and partly paneled window several leaf and rail

Dismantaling - Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers

Reroofing of Best tiled roofing with mangalore tiles over GI sheet of best quality including country wood reepers - 10m2

Flooring with Vitrified tiles with approved colour and quality over C.M 1:3 as per standard specification.

Improvement of Toilet and Bath room complex for School at Topslip in Ulandy Range

Dismantling the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Dadooing the walls with colour Glazed Tiles of size 300 x 600 x7 mm best quality in Cement Mortar 1:2 and pointed with same colour cement neatly to full depth of tiles

Supplying and fixing in position of of colour glazed Indian WATER CLOSET with "P" or "S" strap including all internal fittings fixed to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Supplying fixing and errecting of steel roof trusses and roof truss purlins fixing for PPGI / Gavalume sheet roofing using MS. Tubular section of Required sizes for rafter,and purlins etc.,The trusses shall have welded joints only at all guessets plate junctions except gussets at bottom chords to have bolts and nuts to permit transportation of trusses as directed. The foundation anchor bolts of trusses will be fixed in concrete at wall in bed blocks and well cured, labour for erection of trusses of approved quality transportation, priming coat for all members, cutting, bending, and welding etc. complete complying with standard specification.

Supply and fixing of ISI marked PVC water tank including all to site

Supplying and fixing in position Indian make Wash Hand Basin of size 550 x 400mm of approved quality

Providing and fixing outlet P.V.C. pipes of 110mm dia with necessary shoes, bend and specials clamps,nails. Teakwood plugs

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Supplying fabrication and placing in position steel rods for reinforced including cost of steel all works

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Plastering in cement Mortar 1:5-12 mm thick including cost and conveyance of all materials at site labour charges curing etc…, complete

Finishing with in Cement Mortar 1:5 -20 mm Thick including cost and conveyance of all materials at site labour charges curing etc .., complete

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Painting two coats plastered surface with two coats of emulsion paint over one coat of emulsion primer

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Supplying and fixing Galvalume Colour Sheet of size 0.47mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed.

Improvement of School Old and New Building at Topslip in Ulandy Range

Dismantling the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Flooring with Vitrified tiles with approved colour and quality over C.M 1:3 as per standard specification.

Painting two coats plastered surface with two coats of emulsion paint over one coat of emulsion primer

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Reparing country wood fully paneled door single leaf

Repairing country wood partly glazed and partly paneled window several leaf and rail

Dismantaling - Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers

Reroofing of Best tiled roofing with mangalore tiles over GI sheet of best quality including country wood reepers - 10m2

Providing art painting work including all material and labour charges.,

Supply and fixing of 4' 40W Flu. Fitting complete with Electronic ballast with T.W round block on wall or ceiling with flu. Tube with PVC unseathed copper leads from terminal to the fitting (make: Philips/ Crompton/ Wipro/ Equivalent)SD 88

Improvement of Kitchen and Dinning Complex for School at Topslip in Ulandy Range

Dismantaling - AC Sheet Roofing without roof timber

Dismantaling - Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

R.R. Masonry in CM 1:5 using new stones including necessary provision of bond stones from approved quarry including simultaneous flush pointing with the same mortar as directed by the departmental officers and as per standard specification.

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Plastering in cement Mortar 1:5-12 mm thick including cost and conveyance of all materials at site labour charges curing etc…, complete

Painting two coats plastered surface with two coats of emulsion paint over one coat of emulsion primer

Flooring with Vitrified tiles with approved colour and quality over C.M 1:3 as per standard specification.

Supplying fixing and errecting of steel roof trusses and roof truss purlins fixing for PPGI / Gavalume sheet roofing using MS. Tubular section of Required sizes for rafter,and purlins etc.,The trusses shall have welded joints only at all guessets plate junctions except gussets at bottom chords to have bolts and nuts to permit transportation of trusses as directed. The foundation anchor bolts of trusses will be fixed in concrete at wall in bed blocks and well cured, labour for erection of trusses of approved quality transportation, priming coat for all members, cutting, bending, and welding etc. complete complying with standard specification.

Supplying and fixing PPGI sheet roofing with 0.47 mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Reparing country wood fully paneled door single leaf

Repairing country wood partly glazed and partly paneled window several leaf and rail

Improvement of Girls Hostel Building for School at Topslip in Ulandy Range

Dismantling the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Dadooing the walls with colour Glazed Tiles of size 300 x 600 x7 mm best quality in Cement Mortar 1:2 and pointed with same colour cement neatly to full depth of tiles

Supplying and fixing in position of of colour glazed Indian WATER CLOSET with "P" or "S" strap including all internal fittings fixed to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Supplying and fixing in position Indian make Wash Hand Basin of size 550 x 400mm of approved quality

Providing and fixing outlet P.V.C. pipes of 110mm dia with necessary shoes, bend and specials clamps,nails. Teakwood plugs

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Brick Work in Cement Mortar 1:5 using country bricks of size 8 3/4"x 4 1/4" x 2 3/4" including cost and conveyance of all materials at site ,labour charges, curing, etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Supplying fabrication and placing in position steel rods for reinforced including cost of steel all works

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

Plastering in cement Mortar 1:5-12 mm thick including cost and conveyance of all materials at site labour charges curing etc…, complete

Finishing with in Cement Mortar 1:5 -20 mm Thick including cost and conveyance of all materials at site labour charges curing etc .., complete

Special ceiling Plastering in cement Mortar 1:3-10 mm thick for RCC exposed surfaces such as RCC slaps sun shade including cost and conveyance of all materials at site labour charges curing etc…, complete

Painting two coats plastered surface with two coats of emulsion paint over one coat of emulsion primer

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Reparing country wood fully paneled door single leaf

Repairing country wood partly glazed and partly paneled window several leaf and rail

Dismantaling - Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers

Reroofing of Best tiled roofing with mangalore tiles over GI sheet of best quality including country wood reepers - 10m2

Supplying and fixing Galvalume Colour Sheet of size 0.47mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed.

Flooring with Vitrified tiles with approved colour and quality over C.M 1:3 as per standard specification.

Painting two coats to iron work with one coat of red oxide and two coats of enamel paint

Special Repais and Maintenance of Indoor stadium in GTRM School at Topslip in Ulandy Range

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Finishing with in Cement Mortar 1:5 -20 mm Thick including cost and conveyance of all materials at site labour charges curing etc .., complete

Providing ventilation with sunshade using wired grill including materials, Machiners, welding, painting, labours cost etc., complete.,

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Suppling and fixing of tape connections

Supplying and fixing of health faucets

Providing and fixing outlet P.V.C. pipes of 110mm dia with necessary shoes, bend and specials clamps,nails. Teakwood plugs

Supplying and fixing in position of of colour glazed european WATER CLOSET with "P" or "S" strap and double flapped seat cover ,12.50 litre capacity PVC loe level FLUSHING TANK including all internal fittings fixed on C.I. Brackets, 12 mm PVC or brass nipple, chromium plated brown headed stopcock, 12 mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling the masonry and re-doing the same to the original condition

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 3mm thick hylum sheet cover with T.W switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulator) (5 points per coil) -SD 25

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall 150 x 100 x 113mm with T.W switch box with 3mm thick hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point -SD 38

Supply and fixing of 4' 40W Flu. Fitting complete with Electronic ballast with T.W round block on wall or ceiling with flu. Tube with PVC unseathed copper leads from terminal to the fitting (make: Philips/ Crompton/ Wipro/ Equivalent)SD 88

Supply and fixing fancy glass shade with 11w CFL for BH point SD 80

Manufacturing supplying and fixing of steel Gate with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Purchase of Wooden bench and Desk to the GTRM School at Topslip in Ulandy Range

Supplying Three setter writing desk and setting bench including Materials, Fixing and painting including Labours., etc., complete.

Supplying of Table including Materials, Fixing and painting including Labours., etc., complete.

Transportation Charges

Purchase of Industrial Washing machine to the GTRM School at Topslip in Ulandy Range

Purchase of Industrial Washing Machine

Transportation Charges

Please Enable Macros to View BoQ information