SPECIAL REPAIRS TO SUNGLE JCO ACCN BLDG NO P 246 AND P 259 AT MILIT GIRINAGAR PUNE

Amount

Complete removal of entire existing water proofing treatment in any position, any thickness including tarfelt, Plaster, lean concrete, gravels etc. and removing the debries out side MD land all as specified and directed.

M&L for cement concrete type B1,1:2:4 (using 20mm graded stone aggregate) as in kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), 40mm thick complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100ml/sqm all as directed and specified including vertical surface complete all as specified and directed.

Supply only WPC of approved make complete all as specified and directed.

Demolition of Brickwork or stone masonary built in cement mortar inlcuding all quions, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc. 6mtr mean radius built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in skirting/vertical surfaces etc. and joineted neat in cement slurry and pointed in white or colour cement to match over with & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over with & including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 20mm thick machine cut kota stone slab flooring as in staircase tread, landings laid over and including 20mm thick screed base in CM 1:6 and jointed in with grey cement to match the shade of the slab including rubbing, cutting and polishing complete and including 3 Nos horizontaly anti skid cutting to tread including preparation of old surfaces complete all as specified and directed.

M&L for 20mm thick machine cut kota stone slab as in riser of steps, skiting, dado and pillar laid over and including 15mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab inlcuding rubbing, cutting and polishing complete all as specified and directed.

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed, one edge rounded and polished) in staircase steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of one edge and polishing complete all as specified and directed.

M&L for coloured glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set and jointed and pointed in neat cement slurry in floors over with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.

M&L for PCC 1:5:10 type C-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.

M&L for 100mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate), Using dewatering trimix method finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel window not exc 1.5 sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 125X60mm complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling steel frames etc. incl necessary form work complete all as specified and directed.

M&L for 35mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for factory made 35mm thick H/wood gauged and skeleton shutters, open rebated and prepared to receive gauge etc. (with sash bars) edges of ramming plain, chamfered or grouted, fitted with cut of and mitred beads for securing gauge etc of size of members of shutters as specified in SSR Part-I section 8 clause No. 8.2(a) and fitted to chowkats complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia wire & average width of aperature 1.18mm complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete all as specified and directed.

M&L for brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) length 300mm fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

M&L for 450 mm long brass, skelton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and directed.

M&L for door stopper of brass body 150mm long complete all as specified and directed.

S&F 150mm long extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and directed.

S&F 125mm, double action spring hinges, mild steel with steel wire spring, stove enamelled complete all as specified and directed.

S&F anodised powder coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etccomplete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

S&F Stainless steel fancy type chromium plated 25mm dia as in curtain rod and including stainless steel decorative end cap/brackets, fixed to 25mm dia stainless steel pipe complete all as specified and directed.

S&F Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. complete all as specified and directed.

S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete all as specified and directed.

S&F readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent.

S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed.

S&F 40mm width of flaps (when open) in mm continous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

S&F 150mm Hasp and staples safety type brass with mild steel hinge pin inlcuding bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F 16mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to wooden frame work for cup board doors, partitions, cabinets, cupboards, wall panelling, cladding etc. including screws and all screw finish with lambi etc. All as specified and directed.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off completed all as specified and directed.

M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on brick masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on brick masonry/concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling complete all as spescified & directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new or old plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on new surfaces of wall complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of wall complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on new surfaces of ceiling complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of ceiling complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/new surfaces of wall including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

S&F in repair vitreous china orrisa pan squatting pattern 580x440mm with integral foot rests including P or S trap, including PVC low level flushing cistern 10 ltr capacity complete all as specified and directed.

S&F in repair Wash hand basin, vitrous china, coloured flat back of size 550 x 400mm encluding cutting for and pining in ends of brackets or erecting stand including brass waste coupling waste pipe, 15mm dia bore swan neck fancy type pillar taps, cast copper alloy chromium plated fancy type fixed complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs long body Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. Make :- Cera/Prayag/Jaguar.

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed. Make :- Cera/Prayag/Jaguar.

S & F stainless steel grating doom 125mm dia complete all as specified.

S&F sheet glass shelf assembly consisting of 6mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make :- Cera/Prayag/Jaguar.

S&F in repair 150mm chromium plated shower roses with shower arm with or without swivel joints, any size including fixing to UPVC/GI pipe complete all as specified and dierected. Make :- Cera/Prayag/Jaguar.

S&F Brass CP mixer including connection pipes for mixing hot or cold water screwed down for uPVC/GI pipe and fixed complete all as specified and directed. Make :- Cera/Prayag/Jaguar.

S&F brass chromium plated tubular towel rail 20mm dia including brackets both side complete all as specified and directed.

S&F brass chromium plated bracket for towel rail complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified & directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete. Including taking up or down steel tubing and connections or removal to store all as specified & directed. Make :- Prince/Astral/Plasto.

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.

S&F 500 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) ISI Marked hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 110mm bore including taking down old pipe complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 75mm bore including taking down old pipe complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) brach piece, single (single Y) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) brach piece, single (Single Y) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F PVC (SWR) gully traps 125/100mm setting and jointed in cement solvent complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred to windows, iron door, ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L for framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as directed and complete with locking arrangement.

M&L for mild steel black sheet in door 1.25mm thick in steel gate and similar work cut to size, holes punched, including round headed screws, cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams including or turning up, mitred complete all as specified and directed.

M&L for 150mm dia Reinforced concrete pipes, class NP2 with one collar per length of pipe as in sewage line including jointing of pipe with CM 1:4, including demolition of old existing pipe complete all as specified and directed.

M&L for concrete bed to drain pipes including pipes under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm Graded stone aggregate) as in surface channels and drains including necessary form work for sauccer drain complete all as specified and directed.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred /stopped ends etc complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new/old steel surfaces exc. 10 cm width or girth etc complete all as specified and directed.

E&M (INTERNAL ELECTRIFICATION) Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material to store for keeping in safe custody for taking credit & making good disturbed wall / floor etc complete all as specified and directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates and modular flush boxes for mounting for housing the switches, socket outlets, fan regulators etc complete all as specified and as directed . (a) One light point controlled by one way switch.

(b) One light point controlled by two way switch.

(c) One fan/Exhaust fan point controlled by one switch and one regulator.

(d) One bell/buzzer point controlled by one bell push button on independent.

(e) One 3 pin switch socket outlet point 5 Amps on independent board.

(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item 103.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch1 way 6A, 1 module

S & Fix modular switch2 way 6A, 1 module

S & Fix modular switch1 way 16A, 1 module

S & Fix socket out let 6A 2/3 on combined 2 module

S & Fix socket out let 6A/16A-2/3 pin combined 2 module

S& Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4 step complete all as specified and directed.

S & Fix Bell push modular type SP 6 Amps complete all as specified and directed.

S & Fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and directed.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed. Make :- Bajaj Cat Part No - BLRB DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

S&Fix LED Tube Light Fitting 10 watt, 230 volts, complete with all accessories all as specified & directed. Make :- Bajaj Cat Part No - BCLSB WH 10 NT or eqvt in Wipro/Havell/Crompton.

S&Fix LED wall mounting fancy Light fitting,14 watt, 230 volts, complete with all accessories pre-wired and including connecting and including suitable LED retrofit 9 Watt Bulb and connecting up with twin core twisted flexible copper conductor cable with suitable size. all as specified & directed.Make :- Havells Cat Part No.LHFOECE1TZ1O014 or equivalent model of WIPRO / Philips / Bajaj and Jaquar

Taking down fan,sealing cable end dismantaling blades and removing fan and blades to MES store complete all as specified and directed.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer complete all as specified and directed.

S&F Ceiling fan complete with all accessories 230 Volts,1200 mm sweep (white colore),5 star rated complete and includeding suitable size of fan rod, and MS Clamps with all fixing arrangement to ceiling and roof etc all as specifide & directed. Make : Havelles, Bajaj and Usha .

S & Fix Heavy duty Exhaust fan AC single phase 230 volt 900 RPM of size 300 mm sweep with louver and fixing arrangement complete all as specified & directed. Make : Havells/Bajaj/Usha/Crompton

S & Fix water heater storage type, electric capacity 25 liters BEE 5 Star rated and bracket, nut,bolt,clamp, fasner etc, complete all accessories and fixing arrengenment all as specified and directed. Make : Bajaj/Havells/Recold

Supply & fix MCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface complete all as specified and directed. : Legrand or eqvt make of ABB/Siemens

S & F MCCB Four pole, 415 volts, 100 Amps, rupturing capacity 16 KA, complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN 4 ways 240 volts with IP 43 protection and single door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN 2 ways 240 volts with IP 43 protection and single door, suitable for mounting MCBs all as specified and as directed.

S & F of MCB single pole, 240 volts, 2 to 32 Amps, rupturing capacity 10 KA, ‘B’ series complete all as specified and directed.

S & Fix MCB ,single pole & neutral, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and bracket, nut,bolt,clamp etc complete all accessories and fixing arrengenment all as specified and directed. Make - Bajaj Cat Part No - ENXT P 30L WH CR PC SD Havells Cat Part No -ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC / Crompton Cat Part No - LTRUMP0030XW.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping/conduit (including concealed) with its accessories all as specified and directed for the following :- (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

(b) 2x6.0 sq mm and 1x6 sq mm as earth wire

Taking down the existing electric meter of any capacity and make after disconnecting electricty and examine carry out the servicing and refixing testing in all respect for smooth running complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less that 1.5 M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe withand funnel, PCC 1:3:6 Type C-1 chamber with 40mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars 8mm dia @ 150mm c/c both way with GI protection pipe complete all as specified and directed. Note : Cost of earthlead & protection pipe upto 7.5m shall deemed to be included in quoted rate.

EXTERNAL ELECTRIFACTION Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as directed.

All as per item No 133.00 above but 6 sqmm 2 core cable.

All as per item No 133.00 above but 35 sqmm 4 core cable.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Hard / dense or any type of soil including forming bottom surface etc complete all as specified and directed.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as speified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.

Supply & Laying 40 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement and as directed

S & Fix outdoor type FRP junction box light weight of size 230x170x105mm suitable for pole mounting inclduing MCB SP 6 Amps single pole, flat iron clamp duly painted with two coats of aluminium paint over a coat of red oxide primer and GI nut, bolts, washers and necessary connector for loop in loop out cable connection and suitable size galnds complete all as specifed and directed. Make - Syntex/ Anchor

M &L for GI pipe ''light grade'' for road crossing / on wall / on pole for cable protection of following size :- Make : TATA/JINDAL/ PRAKASH SURYA (a) 40 mm dia

S & Fix LED RUBY (clear) 25 W LED Post top fitting, IP - 65 new genration, post top,energy saving, environmental friendly, long life aesthetically designed with symmentrical light distribution spun aluminium landscape luminaire with high powder LEDs as light source compartable for all gate piller and including GI pipe required to sizes to fixed at site by growting in wall/roof /piller/boundary wall and PCC foundation as per site requirement and as directed. Make :- Havells cat part no - RUBYPT25WLED757PSYMTOPC or eqvt in Bajaj/crompton /wipro

Dismantling the old unserviceable LT Panel Board and Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA poweder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet Make: Any CPRI approved (a) LED/Neon indicator bulb in RYB Colour - 1 Set. b) 4 No aluminium Bus bar 200 amps with chamber c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 125A with breaking capacity 25 KA - 01 Nos

PAWAN B SHINDE

Mehta and Co.

Sky Vision Construction