PROVISION OF STAND BY UG CABLE FROM THD POWER HOUSE TO RADAR AT AF STN SINGARSI

Amount

Note : Prior to commencement of the subject works, the contractor needs to submit valid Electrical Liscence in the name of himself/themself or Aggrement with agency having valid Electrical Liscence alongwith Agency's Electrical Liscense to the Accepting Officer for his approval through GE/AGE(I). In absence of such documents, no work will be executed at site and to be treated as defaulter on the Contrctor's part . In addition, Supervisor for execution of electrical works employed by the Contractor shall posses Supervisory Certificate of competancy issued by concerned State Govt/Union Territory and the Worker/Tradesman for execution of Electrical Works must hold necessary permit issued by concerned State Govt/Union Territory.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth for taking out/laying of under ground cables/pipes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out and in hard/dence soil complete all as specified and directed.

M&L for cutting roads, hard standing and similar nature etc, not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth for taking out/laying of under ground cables/pipes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth complete all as specified and directed.

Returning, filling in soil including spreading leveling watering and well ramming in layers n.exc.25cm thick after laying and testing of cable complete all as specified and directed.

Removing excavated materials n.exc.50 mtr and depositing where directed at a level n.exc.1.5 mtr above the starting point complete all as specified and directed.

M&L providing sand cushioning with a layer of clean, dry, fine sand for protection of electric cable laid in trenches/ducts, punned down to desired thickness complete all as specified and directed. (Note: For payment purposes only punned down thickness of sand shall be measured )

Supply and laying un-reinforced pre cast concrete cable cover class HV type 1 flat size 300 x 180 x 40 mm for cable cable protection.

Supply laying or Fixing or Passing through Pipe, XLPE insulated, Armoured, Electric Power UG Cable (Heavy Duty) with Aluminium Conductor, 11000 Volt Grade (Earth), Nominal Cross-Sectional Area 95 sqmm 3 core and Testing, including Brass Compression Cable Gland, Terminal Lugs, etc. complete all as specified and as directed. (NOTE : Earth Work shall be Measured and Paid for separately under relevant Items). .

Supply, laying and fixing GI pipe light grade for cable protection , laid in trenches or fixed on pole/wall for passing HT cables of sizes 100 mm dia. Make : TATA/BANSAL/JINDAL

M&L 10 cm dia, 8 mm thick cast iron cable route indicator, HT/LT in round shape to 45 cm long angle iron of sixe 25x25x4mm complete embedded in PCC 1:3:6, type C-1(using 20 mm graded stone aggregate) block of size 250 x 250 x 250mm, duly marked/engraved HT CABLE 11 KV/1.10KV of circular cast iron plate including painting in blue colour, necessary excavation & earth work in soft/loose soi complete all as specified and as directed.

M&L cable jointing kit for 11 KV (Earthed) grade cable for indoor end termination, heat shrink type joint complete with jointing material and accessories, suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed.

M&L for straight through heat shrinkable type cable jointing kit for 11 KV (Earthed) grade cable complete with jointing material and accessories, suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed.

M&L for cement concrete type C2 1:4:8 using 40 mm graded aggregate for making good surfaces in road cutting, Hard standing etc complete all as directed

M&L for cement concrete type B1 1:2:4 using 20 mm graded aggregate for making good surfaces in road cutting, Hard standing etc complete all as directed

M/S AMARNATH AGARWALLA

AAY JAY ENTERPRISE

Neha Enterprise