REPAIR TO ROOF LEAKAGE SEEPAGE AND ROOF TREATMENT IN CERTAIN MD ACCN AT UMROI MIL STN UNDER GE UMROI

Amount

Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.

Supply & Fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws(heavy duty) with inbuilt washers and neoprene and EDPM washers as in roofs, walls etc with grade of zinc coating @ minimum 120 gm /sqm etc complete all as specified and directed. (Make- Tata/Jindal/Sail)

Fixing only plain or corrugated steel sheet of any guage or thickness as obtained from dismantling item and shall be fixed with self tapping screws(heavy duty) with inbuilt washers and neoprene and EDPM washers as in roof, walls etc. complete all as specified and directed. NOTE :- The existing Hole shall be filled with the Silicone sealant/ bitumen and the quoted rate shall be inclusive of the same.

Supply & Fix 0.63mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, crumple joint and similar works with grade of zinc coating @ minimum 120 gm /sqm etc complete all as specified and directed. (Make- Tata/Jindal/Sail)

Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws(heavy duty) with inbuilt washers and neoprene and EDPM washers complete all as specified and directed. (Make- Tata Bluescope/CRIL/JSW)

Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws(heavy duty) with inbuilt washers in roofs, walls , complete all as specified and directed. (Make- Tata Bluescope/CRIL/JSW)

Material & Labour applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth incl preparation of surface etc. complete all as specified and as directed.

Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for min Seven days (without any movement). Make : - Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof or as equivalent approved by GE. Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) The work shall be executed through well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE

Dismantling wall and ceiling board any thickness including cover fillets, complete all as directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section (Galvanized @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instructions/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-Charge.

Supply & Fixing 20 mm thick 2nd class hard wood boarding fixed with nails in any situation and planed one side as in eave board, complete all as specified and as directed.

Material & Labour for preparation of old wooden surfaces over 10 cm width of girth and applying two coats of synthetic enamel paint over a coat of pink primer, , complete all as specified and as directed.

Demolition of Cement concrete (un-reinforced) of any description n exc 15 cm thick (below or above ground level), , complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal to store complete all as directed

Supply & Fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls etc all as specified & directed.

Supply & Fix 110mm bore PVC (SWR) bends any radius all as specified & directed.

Supply & Fix 10mm bore PVC (SWR) branch pieces, single 'Y' , equal or unequal all as specified & directed.

Supply & Fix 110mm bore PVC (SWR) junction single, (single T) equal or unequal all as specified & directed.

Schedule of Credit

Dayamonki Kyndiah

MOINUL HOQUE CHOUDHURY

M/S UTTAM SAHA

M/s Nishi Kumar Das

M/s Sohini Construction

Bharara construction

S K Construction

MS HO Shadap