PROVN OF IRON SPIRAL STAIR CASE TO TBRL OFFICE BLDG, PROVN OF LADDERS FOR QTRS, OFFICE CABINS IN RSG 5TH FLOOR, REPLACEMENT OF EXISTING TAP AND APPROACH ROAD AT HIM PARISAR CHANDIGARH

Amount

Supply and fixing for cast copper alloy CP self closer pillar tap fancy type screwed down high pressure for iron pipe as fixed and in repair complete all as specefied and directed of make: Prayag, ESS ESS, Jaquor, CERA and equvalent Cat number BSC-02 .

Supply and fixing for cast copper alloy CP extension nipple of 36mm to 40mm for self closer pillar tap as fixed and in repair complete all as specefied and directed of make: Prayag, ESS ESS, Jaquor, CERA and equvalent Cat number BEN-03/1.5INCH

Taking down aluminium partition/window/ ventilator of any size including dismantling (glazing) sheet glass and old laminated boards complete all as specified and directed.

Supply and fixing in repairs venition blinds, sheer demount blinds with aluminium roller tube, cassettee colour white fabric weight 140 gms, light control 70% fabric composition 100% polyester complete all as specified and directed. (Make : Vistra or equivalent as approved by GE)

Supply and fixing in repair for 5.5 mm thick sheet glass best quality tinted and glazing with al beds complete all as specified and directed.

Supply and fixing in reppair for prelaminated particle board 18/19mm thick intirior grade laminated both side complete fixed as directed.

Supply and fixing of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

Material and labour for cutting out concrete blocks, slabs, brickwork or stone masonry (in alter nate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials entering old wall of Type B-1 (1:2:4)(20mm graded) set in CM 1:4

Material and labour for two coat of synthetic enamel paint including preparation of new or previously untreated surfaces priming with red oxide zinc chrome of any description, over 10cm in width or girth,not otherwise described

Material and labour for Cement concrete in foundations, filling and mass concrete of Type C2 (1:3:6)(40mm graded aggregate)

Supply and fixing of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10 cm long

Excavation overareas, n.exc 1.5m deep and getting out in soft and loose soil

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc n exc 10sqm on plan and n exc 1.5 mtr in depth and getting out in soft and loose soil

Supply and fixing for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Supply and fixing for MS steel work in tubular trusses, post, rafter and purlin including tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240

Supply and fixing for MS plain plates square cut or notched forming holes with out any attachments FE-410W (Gde-E-250) quality B

Material and labour for sub class B brick straight or curved on plan exc 6m mean radius in CM 1:6

Material and labour for two coat of Cement base paint of newly plastered surface including necessary preparation

Material and labour for 15 mm thick cement plaster in CM 1:4 on fair faces or brickwork surfaces on finished surface even and smooth without using extra cement with two coats of cement base paint over a coat of white wash inculding prepration complete as directed

Demolition of cement concrete (unreinforced) any thickness below or above ground floor

Removing excavated material and depositing where directed at a level n exc 1.5 m above the starting point at a total distance beyond 500m and upto total distance of 1.5km from starting point

Material and labour for 150mm Thick soling (or sub base with broken boulders or uarried stone, inter stices filled surface formed and rolled and consolidated to required gradient spread.

Material and labour for 100MM Thick PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate 100mm thick

Material and labour for concrete work in pavement/ hardstanding of 100mm thick PCC M-25 Design Mix finished far and even using extra cement complete all as specified and directed

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brusing neat cement slurry with 3 kg of cement per sqm

Material and labour for forming construction joints of 30mm deep 10mm wide filled with sealing compound of grade `A' complete all as secified and directed

Forming Contraction (Dummy)joints 65mm deep x 10mm wide,filled with sealing compound of grade A complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate as in roof/path kerbs or mud stops, cills, steps, seismic and other similar bands, plinth courses, string courses lacking courses parapets and railing upto 60cm in height coping kneeers appx stones bed plates, kerb water troughs and the like including weathering slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block ultra finish any shape and size confirming to IS 15658-2006 of 60mm thick of m-35 grade with gray cement and pigment over 25MM Sand cusion complete all as specified.

Demolition of Brick masonary built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings

Material and labour for two coat of Cement base paint of newly plastered surface including necessary preparation.

Material and labour for cement concrete in foundations filling and mass concrete Type D2 (1:4:8) using 40mm graded aggregate.

Material and labour for cement concrete as in walls, columns etc (1:2:4) Type B1 (using 20mm graded aggregate).

Material and labour for formwork to flat sides of column of concrete foundations footings bases complete all as specified.

Supply and fixing for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking beding spirally for hooping ends and binding with and including ms wire (annealed) not less than 0.9mm dia or securing clips

Supply and fixing for mild steel TMT bars 6mm to 8mm dia and over cut to length bent to shape required including cranking beding spirally for hooping ends and binding with and including ms wire (annealed) not less than 0.9mm dia or securing clips

Material and labour for flush pointing in CM 1:4 to brick wall

Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished for wall lining (veneering to wall)12mm thk in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Supply and fixing of Aluminium composite panel of superior quality interior grade metallic/solid series to wall (ACP thickness should be 4mm minimum and laminated with aluminium foil of minimum thickness of 0.50 mm fixed on aluminium grid of size 50mm x 25mm x 2.5mm thick (thickness of grid 2.5mm) by suitable fixing arrangement SS screw, silicon (weather sealant and joints between panels shall be filled by silicon based sealant complete all as specified and directed by GE. Note : Colour and design of composite panel will be approved by GE/user authority before incorporation of the work).

shree balaji builders

GOODWILL ENGINEERS

MAGOTRA BUILDERS