MANNING, OPERATION AND COMPREHENSIVE MAINTENANCE OF MECHANICAL LAUNDRY AND OIL FIRED INCINERATOR AT MH JALANDHAR CANTT UNDER GE (EAST) JALANDHAR CANTT

Amount

Manning & operation of steam boilers - two nos Non-IBR of make Fabtech Engineering capable of generating 600Kg per hour P & A 100 degree C. Coil type design having reverse fuel technology, cleaning of photocell glass, cleaning of vision glasses of burner, cleaning or changing of diesel filter as required,filling of fuel in tank, descaling of steam coil of boiler, decarbonisation of burner complete as and when required, cleaning of resin of water softening plant with salt solution, cleaning of steam header, tightening and adjustment of fan belt, greasing to piston of water pump, rectification of leakage of steam if any, including daily checking of all safety equipment, rectification of problem if any to generate required quantity of steam for 8 hours in a day, with one operator having ,ITI in respective trade with minimum 02 years experience in trade or 5 years field experience in the trade. (wef 0800 hrs to 1600 hrs) complete all as specified and directed by Engr-In-charge.

Manning and operation of oil fired incinerator model PY-300 having burning capacity 130-185kg/hr, comprising of Primary chamber, Secondery chamber, ID Fan, including filling in chamber and burning of all bio waste of military hospital, including cleaning of photocell glass, cleaning of vision glasses, cleaning/replacing of diesel filter,,filling of fuel in tank,cleaning of chimney,cleaning of ash/residuals from primary and secondary chamber and dispose it in ground by digging in ground, cleaning of chimney, checking of all safeties and rectification of problem if any for the smooth and safe working of inceninerator for one month, in one shift per day from 0800 hrs to 1600 Hrs by one operator ITI qualified in respective trade with 2 years experience or with 5 years field experiencein trade complete all as specified and directed by Engr-In-charge. Make thermax.

Material and labour for routine preventive and periodical maintenance of washing machine of capacity 100 kg as mentioned below, mechanical laundry equipments such as retightening and adjustment of belt, cleaning of solenoid valve, rectification of water/ steam leakage through valves/pipe, joints greasing of bearings replacement of rubber gasket of front door, checking of all electrical connections, tightening of all nut bolts etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Machine No - 1

Machine No - 2

Machine No - 3

Material and labour for routine preventive and periodical maintenance of washing machine of capacity 50/60 kg as mentioned below, mechanical laundry equipments such as retightening and adjustment of belt, cleaning of solenoid valve, rectification of water/ steam leakage through valves/pipe, joints greasing of bearings replacement of rubber gasket of front door, checking of all electrical connections, tightening of all nut bolts etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.charge.

Machine No - 1

Machine No - 2

Material and labour for routine preventive and periodical maintenance of washing machine of capacity 25/30 kg-01 Nos, mechanical laundry equipments such as retightening and adjustment of belt, cleaning of solenoid valve, rectification of water/ steam leakage through valves/pipe, joints greasing of bearings replacement of rubber gasket of front door, checking of all electrical connections, tightening of all nut bolts etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Material and labour for routine preventive and periodical maintenance of hydro extractor top loading machine of capacity 25 Kg as mentioned below such as tightening of nut lolts, checking of electric connection, replacement of thrust load absorbing rubber base etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Hydro No -1

Hydro No -2

Hydro No -3

Hydro No -4

Material and labour for routine preventive and periodical maintenance of Drying Tumbler of capacity 50 Kg as mentioned below such as tightening of nut bolts, checking of electric connection cleaning of radiator, cleaing of lint dirt from blower unit, cleaning of trap, checking of heating elements etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Tumbler No -1

Tumbler No -2

Tumbler No -3

Material and labour for routine preventive and periodical maintenance of Drying Tumbler of capacity 60 Kg as mentioned below such as tightening of nut bolts, checking of electric connection cleaning of radiator, cleaing of lint dirt from blower unit, cleaning of trap, checking of heating elements etc or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Tumbler No -1

Tumbler No -2

Material and labour for routine preventive and periodical maintenance of Flat work Ironer chest type as mentioned below such as tightening of nut bolts, checking of electric connection, checking of air cylinders, checking of all seals, replacement of air pressure flexible pipes and rectification of air leakage if any or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Flat Ironer No -1

Flat Ironer No -2

Material and labour for routine preventive and periodical maintenance of Flat bed press as mentioned below such as tightening of nut bolts, checking of electric connection, checking of air cylinders, checking of all seals, replacement of air pressure flexible pipes and rectification of air leakage if any or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Flat Bed Press No -1

Flat Bed Press No -2

Flat Bed Press No - 3

Material and labour for routine preventive and periodical maintenance of Air compressor of capacity 5 HP double stage as mentioned below such as tightening of nut bolts, checking of electric connection, adjustment of belt, rectification of air leakage if any or any other petty repair required for smooth functioning of machine installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge.

Compresser No -1

Compresser No -2

Material and labour for routine preventive and periodical maintenance of water softening plant 02 Nos such as tightening of nut bolts, checking of electric connection, checking of water leakage through pipes/valves and their rectification, cleaning of resin of water softening plant with salt solution and make water completely soft and clean suitable for steam boilers or any other petty repair required for smooth functioning of water softening plant installed at Military Hospital JRC complete upto the entire satisfaction of Engr-in-charge. Note :- (i) Resins of water softening plant in full qty will be replaced after every three months (quarterly). (ii) cleaning of resins with salt solution will be done daily. (iii) Cost of resins and salt shall be deemed to be included in quoted rate of this item.

Material and labour for routine preventive and periodical maintenance of steam boilers as mentioned below Non-IBR of make Fabtech Engg and of make Thermax 02 Nos capable of generating 600Kg per hour P & A 100 degree C. Coil type design having reverse fuel technology, cleaning of photocell glass, cleaning of vision glasses of burner, cleaning or changing of diesel filter as required, filling of fuel in tank, descaling of steam coil of boiler, decarbonisation of burner complete as and when required, cleaning of resin of water softening plant with salt solution, cleaning of steam header, tightening and adjustment of fan belts, greasing to piston of water pump, replacement of oil of pump, rectification of leakage of steam if any, replacement of all spare parts including daily checking of all safety equipment, rectification of problem if any all as specified and directed.

Boiler No -1

Boiler No -2

Material and labour for routine preventive and periodical maintenance of oil fired incinerator model PY -300 having burning capacity 130-185 Kg/hr,comprising of Primary chamber, Secondery chamber, ID Fan, including filling in chamber and burning of all boi waste of military hospital, cleaning of photocell glass, cleaning of vision glasses, cleaning /replacing of diesel filter, filling of fuel in tank, cleaning of chimney , cleaning of ash/residuals from primery and secondary chamber and dispose it in ground by digging in ground, replacement of all spare parts, checking of all safeties and rectificaitons of problem if any for the smooth and safe working of inceninerator all as specified and directed. Note for item No 3 to 14 :- (i) Contractor shall deploy sufficient trademen (minimum 03 ) in addition to Boiler and Incinerator operator having experience to repair all above mentioned machines from Ser No3 to 14 with helpers for daily/weekly/monthly/quarterly maintenance. (ii) Rate of grease/pump oil/descaling acid/diesel filters/salt solution for water softening plant/cleaning cloth shall be deemed to be included iun the quoted rate of concerned item. (ii) Contractor shall stored sufficient spare parts required for machineries (Srl No 3 to 14) which shall be measured & paid for separately as "Supply and fixing in replacement" under the respecive items of BOQ

Supply and fixng in replacement air regulator and filter to regulate air presure upto 10 KG/ sqcm or 0.1 mpa to 0.7 mpa and to filter and trap moisture in the air suitable for Calendering machine. Flat bed press and washing machine's air cylinders etc.

Supply and fixing in replacement steam solenoid valve 15mm valve 230 volts AC complete all as specified and directed. Make: Falcon/Techno or as per existing make & type.

Supply and fixing in replacement steam solenoid valve 25mm valve 230 volts AC complete all as specified and directed. Make: Falcon/Techno or as per existing make & type.

Supply and fixing in replacement water solenoid valve 25 mm dia bore 230volts AC complete all as specified and directed. Make: Falcon/Techno or as per existing make & type.

Supply and fixing in replacement water solenoid valve 40 mm dia bore 230volts AC complete all as specified and directed. Make: Falcon/Techno or as per existing make & type.

Supply and fixing in replacement water solenoid valve 50 mm dia bore 230volts AC complete all as specified and directed. Make: Falcon/Techno or as per existing make & type.

Supply and fixing in replacement brass steam stop valve 15 mm Bore for steam with wheel head complete all as specified and directed. Make: Sant/Scud/leader

Supply and fixing in replacement brass steam stop valve 25 mm Bore for steam with wheel head complete all as specified and directed. Make: Sant/Scud/leader

Supply and fixing in replacement brass steam stop valve 50 mm Bore for steam with wheel head complete all as specified and directed. Make: Sant/Scud/leader

Supply and fixing in replacement mild steel spocket 450 mm Outer teeth with key base complete all as specified and directed. Make: Fabtech/ Fabcare/ Stefab

Supply and fixing in replacement steel sprocket 80mm outer teeth with key base complete all as specified and directed. Make: Fabtech/Fabcare/Stefab

Supply and fixing in replacement V-belt Size A-57 complete all as specified and directed. Make : Fenner/Dunlop

Supply and fixing in replacement V-belt size A-85 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size A-74 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size B-102 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size B-105 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size B-97 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size B-79 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size B-126 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement V-belt size A-112 complete all as specified and directed. Make : Fenner/Dunlop.

Supply and fixing in replacement diode 10HI CN 25D suitable for Hyodro Extractor as per existing make and size complete all as specified and directed.

Supply and fixing in replacement indicator LED type in red/blue/green colour complete complete all as specified and directed. Make: Vaishno/BCH/Caltron

Supply and fixing in replacement limit switch for door closer & opener of Washing machine . 100 Kg, 50Kg, 30 Kg, 25Kg, drying tumbler 50 Kg, 60 Kg Cap complete with wiring as per existing make and size complete all as specified and directed. Make : Vaishno/BCH/Caltron

Supply and fixing in replacement time switch reversing type 20-5-25 size as per existing make and size complete all as specified and directed. Make : Mukand or equivalent

Supply and fixing in replacement TD trap. PMO 21 bar TMO 285 degree centigrade size 15 mm complete all as specified and directed. Make : Spirax/Sant/Leader

Supply and fixing in replacement TD trap. PMO 21 bar TMO 285 degree centigrade size 25 mm complete all as specified and directed. Make : Spirax/Sant/Leader

Supply and fixing in replacement solenoid coil set 15 mm 230volts AC suitable for Steam solenoid valve complete all as specified and directed. Make: Falcon

Supply and fixing in replacement solenoid coil set 25 mm 230volts AC suitable for Steam solenoid valve. As per existing make & type complete all as specified and directed.

Supply and fixing in replacement solenoid coil set 40 mm 230volts AC suitable for Steam solenoid valve. As per existing make & type complete all as specified and directed.

Supply and fixing in replacement solenoid coil set 50 mm 230volts AC suitable for Steam solenoid valve. As per existing make & type complete all as specified and directed.

Supply and fixing in replacement push button in green/red/yellow colour for on/off complete all as specified and directed. Make : Vaishno

Supply and fixing in replacement push button red colour for emergency stop or reset complete all as specified and directed. Make : Vaishno

Supply and fixing in replacement over load relay 2.5 to 4 Amps complete all as specified and directed. Make : L & T

Supply and fixing in replacement over load relay 5 to 9 Amps complete all as specified and directed. Make : L & T

Supply and fixing in replacement over load relay 10 to 15 Amps complete all as specified and directed. Make : L & T

Supply and fixing in replacement ball bearing for both side of Calendaring drum bearing No. 6264 complete all as specified and directed. Make : NBC/SKF

Supply and fixing in replacement ball bearing for both sides of Calendaring drum bearing No. 6217 complete all as specified and directed. Make : NBC/SKF.

Supply and fixing in replacement pneumatic solenoid valve suitable for air pressure 0.15 to 0.8 Mpa, with 05 air terminal points and 02 Nos silencers for pneumatic cylinder for lifting of chest and press head of flat bed press Model J4V410-15 of JELPC or equivalent of Britch/ Konark.

Supply and fixing in replacement pneumatic solenoid valve suitable for air pressure 0.1 to 0.7 Mpa, with 05 air terminal points and 02 Nos silencers for pneumatic cylinder for lifting of chest of flat work ironer or for opening drain of washing machines Model F52104 of Tecno or equivalent of Britch/ Konark.

Supply and fixing in replacement solenoid coil set sutable for pneumatic solenoid 230 V, AC 50 HZ, model Best-Nr.0200 of Techno, ED 100 % IP-65 all as specified and directed.

Supply and fixing in replacement solenoid coil set sutable for pneumatic solenoid 3.5 VA, 230 V, AC 50 HZ, ED 100 % IP-65 all as specified and directed.

Supply and fixing in replacement contactor ML 1.0 with auxiliary contacts with standard operating coil 440/ 240 volts complete all as specified and directed Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement contactor ML 1.5 with auxiliary contacts with standard operating coil 440/ 240 volts complete all as specified and directed Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement contactor ML 2.0 with auxiliary contacts with standerd operating coil 440/ 240 volts complete all as specified and directed Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement contactor ML 3.0 with auxiliary contacts with standard operating coil 440/ 240 volts complete all as specified and directed Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement power contactor electrical operated 220v 50Hz suitable for sequence set Control (peter CEM-MA810) including overload relay of suitable rating as per existing make and type complete all as specified and directed by Engineer-In charge.

Supply and fixing in replacement power contactor 4 pole 25 Amp with auxiliary contact block normally complete all as specified Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement Electrical contactor 4 pole 18 Amp with auxiliary contact block normally complete all as specified Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement Electrical contactor 4 pole 32 Amp with auxiliary contact block normally complete all as specified Make : L&T/Seimens/GE/ Schneider/ BCH.

Supply and fixing in replacement crank shaft for gear box coupling (for jointing) of both the gear box drive for rotating drum- 01 set as per original type and size complete all as specified and directed.

Supply and fixing in replacement standard operating coil 240/415 volts suitable for contractor AC complete all as specified and directed. Make : L &T/Siemens/GE/ BCH/ Scheneider.

Supply and fixing in replacement pneumatic air cylinder for Calendaring machine and flat bed press air pressure 0.1 to 0.7 Mpa Model SC125X400 of Techno or equivalent of Hindustan/Jelpec/Akari

Supply and fixing in replacement transformer cap, 1000 VA, 415V/52V, for Hydro extractor for brake system as per sample complete all as specified

Supply and fixing in replacement DOL starter in sheet steel enclosure, AC 415 volts 50 C/S 3 phase with single phasing protection of capacity 5 HP complete all as specified and directed. Make : L&T/Siemens/GE/BCH

Supply and fixing in replacement Flexible air pipe male screwed both end connection 15mm bore 100mm long as per sample complete all as specified and directed.

Supply and fixing in replacement flexible air pipe male screwed both end connection 15mm bore 550mm long as per sample complete all as specified and directed

Supply and fixing in replacement counter pulley with key, pulley made of mild steel 18", 03 groove Suitable for drying tumbler machine 50 Kg as per existing type and size sample complete all as specified.

Supply and fixing in replacement gear box pulley with key, pulley made of mild steel 8", 03 groove Suitable for drying tumbler machine 50 Kg as per existing type and size sample complete all as specified.

Supply and fixing in replacement counter shaft made of mild steel Suitable for drying tumbler 50 Kg as per sample complete all as specified.

Supply and fixing in replacement coupling assembly for gear box to motor with turning, nuts, bolts and washers, coupling made of mild steel Number 11 suitable for drying tumbler 50 Kg as per existing type and size sample complete all as specified

Supply and fixing in replacement tyre coupling Number 11 suitable for Drying tumbler 50Kg as per existing make & type complete all as specified and directed.

Supply and fixing in replacement gear box complete with shaft suitable for Drying tumbler 50 Kg as per existing make & type complete all as specified and directed

Supply and fixing in replacement gear box complete with shaft suitable for calendering machine as per existing make & type complete all as specified and directed

Supply and fixing in replacement Spring assembly with bracket plate on both ends including welding and fixing job work suitable for flat bed press all as specified and directed

Supply and fixing in replacement Flexible air pipe for air compressor suitable for air pressure 10 Kg sqcm 15mm dia as per existing all as specified and directed

Supply and fixing in replacement timer 0-60mm. suitable for Washing machine.100 Kg, 50 kg, 30 Kg,25 Kg drying tumbler 50 Kg, 60 Kg Cap as per sample complete all as specified.

Supply and fixing in replacement reversing timer for forward and reverse suitable for Washing machine.100 Kg, 50 kg, 30 Kg,25 Kg drying tumbler 50 Kg, 60 Kg Cap as per sample complete all as specified.

Supply and fixing in replacement time delay 0 to 1 minute suitable For hydro extractor 25kg as per sample complete all as specified. Make : BCH/L &T/GE

Supply and fixing in replacement digital temperature controller 0-600C along with complete wiring for Washing machine. 100 Kg, 50 kg, 30 Kg,25 Kg drying tumbler 50 Kg, 60 Kg Flat bed press, flat work ironer etc as per existing specitifications complete all as specified and directed. Make: L&T, Siemens.

Supply and fixing in replacement digital temperature controller 0-1100C along with complete wiring for incinerator chambers as per existing specitifications complete all as specified and directed. Make: L&T, Siemens.

Supply and fixing in replacement temprature sensor/thermo couple suitable for Digital temperature controller along with complete wring for incinerator's primary and secondary chamber, venchury inlet and outlet as per existing sspecifications complete all as specified and directed. Make : L&T, Siemens

Supply and fixing in replacement temprature sensor/thermo couple suitable for Digital temperature controller along with complete wring for Washing machine. 100 Kg, 50 kg, 30 Kg,25 Kg drying tumbler 50 Kg, 60 Kg Flat bed press, flat work ironer etc as per existing specitifications complete all as specified and directed. Make: L&T, Siemens.

Supply and fixing in replacement single phase preventer, suitable for electric motor/circiur upto 10HP of mechanical laundry machnes all as specified and directed. Make : Minilec/ Vashnavi

Supply and fixing in replacement trolley wheel suitable for wash Room trolley/dry, linen trolley size 6” dia as per sample complete all as specified. Make : Senson/Satyam/Rolin

Supply and fixing in replacement steam press single phase, stainless steel base heavy duty complete all as specified

Supply and fixing in replacement pneumatic cylinder repair kit Suitable for flat bed press and calendaring Machine as per existing make & type all as specified and directed.

Supply and fixing in replacement hydro rubber buffers as per sample complete all as specified. Make : Fabtech/Stefab/Fabcare

Supply and fixing in replacement drain assembly suitable for Washing machine 100 Kg/ 25 kg/ 50 kg including sealing washer, steel rod from pneumatic cylinder, pneumatic solenoid valve, and coil to drain release with GI cover pipe 20mm dia medium grade, complete MS heavy grade drain pipe of size 100 mm dia duly painted with 2 coats of enameled paint over a coat of red oxide inside and outside and cover pipe Make : Supershine or equivalent as approved by GE.

Supply and fixing in replacement hydro balancing spring as per sample complete all as specified.

Supply and fixing in replacement Brass door handle suitable for washing Machine 100 kg, 50 kg, 30 Kg, 25kg all as specified and directed

Supply and fixing in replacement Brass door handle lock suitable for drying Tumbler 50Kg all as specified and directed

Supply and fixing in replacement bearing hosing suitable For washing machine 100 kg, 50 kg, 25 kg and tumbler 50kg as per existing make & type all as specified and directed.

Supply and fixing in replacement steam radiator made of stainless steel Min 18 SWG tubing & aluminium fins suitable for dryingTumbler 50Kg as per existing make & type all as specified and directed. Make : Radicon/ Elicon/ Shanti/ Shakti/ Fabtech/ Supershine

Supply and fixing in replacement electric motor 3 Phase, 440V, AC, 50Hz, 2 HP,1440rpm, NGEF suitable to couple with gear box of drying tumbler 50 Kg all as specified and directed

Supply and fixing in replacement electric motor 3 Phase, 440V, AC, 50Hz, 2 HP, 1440rpm, NGEF with and including blower completed with fan, nuts, bolts and washers etc suitable for drying tumbler 50 Kg all as specified and directed

Supply and fixing in replacement electric motor 3 Phase, 440V, AC, 50Hz, 5 HP, 1400rpm, completed with fan, nuts, bolts and washers etc suitable for washing machine 100 Kg as per existing all as specified and directed

Supply and fixing in replacement MCB TPN 40 to 63 Amp, 10 KA, C –Curve complete all as specified and directed Make : L&T/Legrand/Schneider

Supply and fixing in replacement tullu pump with motor 1/2 HP with suction steel pipe 40mm dia 1.2 mtr long staines at end and delivery flexible pipe all as specified and directed

Supply and fixing in replacement lgnition transformer suitable for the steam boiler 600Kg all as specified and directed. Make : Thermax/Fabtech/GURU

Supply and fixing in replacement optimizer suitable for the steam boiler 600Kg/ Hrs made Fabtech Model FE-BLR-CO as per original make and size all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement burnner nozzle suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement electrode assembly suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement electrode cap suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement Burnner gun suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement pressure switch for water suitable for the steam boiler 600Kg all as specified and directed Model 520-400 of Indfoss or equivalent in L&T/BCH/Vaishno

Supply and fixing in replacement pressure guage 0-21Kg/sqcm suitablee for the steam boiler 600Kg all as specified and directed Model 520-400 of Indfoss or equivalent in GURU/Thermax/Donfoss

Supply and fixing in replacement oil flter suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement water level switch suitable for the steam boiler 600Kg all as specified and directed. Make: Indfoss/Thermax/Donfoss

Supply and fixing in replacement steam header suitable for the steam boiler 600Kg all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement steam trap assembly of moisutre separator suitable for 50mm size pipe line all as specified and directed. Make : Thermax

Supply and fixing in replacement economiser suitable for 600Kg/hr steam boiler all as specified and directed. Make: Thermax/Fabtech

Supply and fixing in replacement diffuser plate assemblty MI burner as per existing type and size all as specified and directed

Supply and fixing in replacement burner nozzle GHP at 800 to 1200 degree Centigrade all as specified and directed

Supply and fixing in replacement ignition transformer of burner of primary /secondary chamber as per exisitng type and size all as specified and directed.

Supply and fixing in replacement electrode front pair of burner of primary /secondary chamber as per exisitng type and size all as specified and directed.

Supply and fixing in replacement electrode rear pair of burner of primary /secondary chamber as per exisitng type and size all as specified and directed.

Supply and fixing in replacement electrode cap (02 Nos) cat part No 86111111200 as per exisitng type and size all as specified and directed

Supply and fixing in replacement cable electrode cat part No 0034121100 as per exisitng type and size all as specified and directed

Supply and fixing in replacement fuel oil pump suitable for 600Kg/hr steam boiler as per exisitng type and size all as specified and directed

Supply and fixing in replacement pressure guage 0-40 Kg per Sq.cm-1/4 BSP each cat part No.8451114100 all as specified and directed.

Supply and fixing in replacement electrode holder of burner of primary /secondary chamber as per exisitng type and size all as specified and directed.

Supply and fixing in replacement sequence controller cat part No 860511600 as per exisitng type and size all as specified and directed

Supply and fixing in replacement photocell cat part No 86031111400 as per exisitng type and size all as specified and directed

Supply and fixing in replacement thermocouple K type KER 710 for secondary chamber cat part No WM00042092 all as specified and directed

Supply and fixing in replacement thermocouple K type SS310 for primary chamber cat part No WM00042083 all as specified and directed

Supply and fixing in replacement RTDPT-100 temp. sensor outpur cat part No WM00042073 all as specified and directed

Supply and fixing in replacement contactor for burner /ID fan make siemens cat part no 3 TF-30-02-0D 12.5 to 2 Amps capacity or equivalent in L&T/Thermax

Supply and fixing in replacement Relay for ID fan motor-1 make siemens cat part No .34A5200-IB8- 12.5 Amps capacity

Supply and fixing in replacement Contactor for main control and burner chamber 3TF 2001-QAPO-4 all as specified and directed

Supply and fixing in replacement Contactor for P fan motor siemens cat part No 3TF 3200 A1 all as specified and directed.

Supply and fixing in replacement Timer cat part No . 3PU 6020 as per existing type and size all as specified and directed

Supply and fixing in replacement DOL starter for 0.5 HP complete all as specified

Supply and fixing in replacement DOL starter for 1 HP complete all as specified

Supply and fixing in replacement DOL starter for 1.5 HP complete all as specified

Supply and fixing in replacement pressure switch PMI cat part No 890254102 as per existing type and size all as specified and directed

Supply and fixing in replacement electronic sequence timer Cat Part No 894841250 all as specified and directed

Supply and fixing in replacement Electric copper cable single core Teflon coated heat proof sutable for steam boiler burner all as specified and directed.

Supply and fixing in replacement temp controller (DTC) 0 ot 400 Degree centigrade for 600 Kg boiler all as specified and directed.

Supply and fixing in replacement Finnel strip heater made of GP sheathing having terminals at one end and two holes for horizontal installation of capacity 3 KW in Drying tumbler complete all as specified and directed. Make: Daspass/Lazer/Usha

Supply and fixing in replacement door closing lock for hydro extractor and washing machine 100Kg stainless steel, male threads on one end and wheel/rod on other end to close the door tightly as per existing all as specified and directed. Make: Supershine/Stefab/Fabtech

Supply and fixing in replacement gasket /lipping for hydro extractor lid covering complete circumference of lid as per exising all as specified and directed. Make: Supershine/Stefab/Fabtech

Supply and fixing in replacement rubber gasket for main window of washing machine 100 Kg as per exising all as specified and directed. Make: Supershine/Stefab/Fabtech

Supply and fixing in replacement rubber gasket for viewing small window of washing machine 100 Kg as per exising all as specified and directed. Make: Supershine/Stefab/Fabtech

Supply and fixing in replacement Hooter for panel of steam boiler 600 Kg/Hr solid state buzzer multi voltage & multi current type Model SSBM-9696 of SCI or equivalent

Supply and fixing in replacement main pulley bush suitable for Washing machine 100 Kg, 50 kg, 25 Kg as per sample complete all as specified.

Supply and fixing in replacement tie rod suitable for washing Machine 100 Kg, 50 kg,25 Kg Cap as per sample complete all as specified.

Supply and fixing in replacement gear box pulley with oil seal and gasket for flat work ironer as per sample complete all as specified

Supply and fixing in replacement star coupling assembly as per existin type and size all as specified and directed

Supply and fixing in replacement Copper control wire duly PVC insulated and overall sheathed, duly thimble, lugs of sutiable size with stranded copper conductor of size 16 sqmm 3.5 core all as specified and directed.

Supply and fixing in replacement high pressure fuel hose SAE 100 R1 ID 1/2", WP 160 bar/2320psi, 01 Mtr long suitable for steam boiler fuel line all as specified and directed

Material and labour for rewinding of electric motor 1HP 3 phase 440 V AC 1400RPM including the following jobs:- (a) Rewinding of electric motor of washing Calendaring machine/flat bed press etc. Using super enameled copper winding wire of existing gauge, replacement of insulating material, sleeves and varnishing the same after rewinding. (b) Cleaning washing ball bearing with kerosene Oil, greasing and filled fresh grease of existing grade Make : Castrol, refixing to its original position and testing commissioning complete all as specified.

All as per item No 155 here-in-before but for electric motor of capacity 2 HP, 3 Phase 440 V

All as per item No 155 here-in-before but for electric motor of capacity 3 HP, 3 Phase 440 V

All as per item No 155 here-in-before but for electric motor of capacity 5 HP, 3Phase 440 V

All as per item No 155 here-in-before but for electric motor of capacity 7.5 HP, 3Phase 440 V

All as per item No 155 here-in-before but for electric motor of capacity 10 HP, 3Phase 440 V

Material and labour for cross arms cable tray Angle iron / MS hollow pipes (round or square) bracings, supports, clamps and back plates fabricated from structural steel sections including nuts and bolts, washers, selding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive or one primer coat, and one under coat and one finishing coat of paint. all as specified and directed

Supply, laying, testing and commisioning in replacement of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 95 sqmm 3.5 core all as specified and directed

Material and labour for earthing in replacement complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI strip 25x4 mm as earthing lead connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth strip will be protected by 40 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI strip meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Material and labour in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in gound or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32mm x 6mm galvanised iron or steel stip all as specified and directed

M&L in replacement of ID fan of incinerator including SS 304 impeller,shaft,bearings 02 Nos, with pulley, suitable for 3000 rpm, including fabrication of body of ID Fan made out of Hot dip galvanized MS plate of suitable size, including fixing with separator incinerator with MS sheet and flanges nuts, bolts and washers after dismantling of old ID fan complete all as specified and directed. Make : Thermax / Fabtech engineering.

Supply and fixing MS tubing 15mm bore dia heavy grade suitable for steam boiler line with encessary fittings such as tees, elbow, bends unions fixed by welding and threading in position existing U/S pipe located including cutting and taking out to existing U/S pipe/fitting and covering with insulator 50mm thick all Around glass wool and cladding with 36 SWG Aluminium sheet complete all as specified and directed.

All as per item No 166 here-in-before but 20mm Bore dia tubing.

All as per item No 166 here-in-before but 25mm Bore dia tubing.

All as per item No 166 here-in-before but 40mm Bore dia tubing.

All as per item No 166 here-in-before but 50mm Bore dia tubing.

Supply and covering in replacement steel rollers with steel wool padding for covering all suface area of two steel roller for flat work ironer length 3000mm and dia 850 mm each roller as per existing make & type complete all as specified and directed

Supply and covering in replacement with cloth bed sheet thick best quality light brown colour of two rollers of flat work ironer size length 3.5 mtr and dia 850 mm including nefa 50mm on 3.5 mm side to outer of drum complete for 02 rollers of machine all as specified and directed as per existing make & type

Supply and covering in replacement bed of flat bed press with cloth 2mtr x 1mtr of machine including replacement glass wool, thick blanket, thick conon cloth and Reymond outer cover of bed and cover of head with high quality cover suitable for temperature upto 250 degree centigrade all as specified and directed as per existing make & type

Material and labour for repairing to outer body of chimney/incinerator by cutting, curving from factory curving machines as required in size for incineator parts and replacing the MS sheet 5mm thick including welding and fabricating work, machining welding joints, filling cavities with filler, painting with super enameled paint with hold upto temperature 20000 C over a coat of red oxide with same specification all as specified and directed

Material and labour for preparation of surface for painting of steam boiler (Model FE/BLR/CO of Febtech Engineering) all accessories, connected items i.e Boilers outer shell, moisture separator, economiser, Chimney, Flue gas duct, main header for flue gas, other MS/Alumiinium structure, MS pipes for fuel and water , other E/M eqpts etc by preparationof surface by scraping old paint with sand paper and blower, filling of cavities with suitable putty and applying two coat of super enamel synthetic heat rsistance paint, with hold upto temperature 20000 C properly paint over one coat of red oxide paint with same specification complete all as specified and directed

Material and labour for painting of MS surface of Chimney of steam boilers and incinerator, surface of iincinerator chambers, and other surface of incinerator parts by preparation of surface by scraping old paint with sand paper and blower, filling of cavities with suitable putty and applying two coat of super enamel synthetic heat resistance paint, with hold upto temperature 20000 C properly paint over one coat of red oxide paint with same specification complete all as specified and directed

Material and labour for Overhauling of Venturi Scrubbing system by removing nuts and bolts with replacement of old/defective parts and reassemble the same, repalcement of old gasket, nuts and bolts with new gasket, nuts and bolts replacement of SS 304 filter web type 800mm x 600mm high pressure water solumn shower system with SS 304 lining of venturi scrubbing shower system and testing of the machine complete including replacement of the following spares:- (a) MS bush 100mm dia suitable for lower fan - 01 No (b) SS tube 15mm x 700mm with shower - 05 Nos (c) SS filter web type dia 800mm x 600mm - 01 No (d) Asbestos tape 40mm x 10mm x 200mm - 04 Nos

Supply and replacement of power backup of UPS consisting 12 Volt 7.2 AH 06 Nos batteries in Microtek online UPS 3 KVA all as specified and directed . Make: Schneider/Microteck

Supply and fixing in replacement main transformer 5 KVA online UPS 15 KVA of Microteck all as specified and directed

Supply and fixing in replacement battery 12 V 180 AH for DG Sets all as specified and directed Make : Amron/ Exide/ TATA

Material and labour for servicing of online UPS 15 KVA 3 phase in 3 phase out of model 9 LLTEM of Microtek by engineer of Microtek company on monthly basis by cleaning dust from all electronic parts with blower and cleaning brush checking serviceability of all electronic parts including IGBT's SCR diode, HBC fuses, Capacitors, charger card, IP sense TX PCB, O/P sense TX PCB, protection card, SMPS card, driver card, LED display module, DC capacitors, AC fans, CD MCB's wiring, copper strips and replace if any part found defective, cleaning and greasin battary terminals of 30 Nos batteries all as specified and directed. Note:- (i) Successful bidder will have to submit AMC from OEM i.e. Microtek within one week of acceptance of contract. (ii) AMC will cover complete repair/replacement of parts of UPS except main transformer 5 KVA

Material and labour for servicing of online UPS 3 KVA single phase 4 Nos of Microtek by engineer of Microtek company on monthly basis by cleaning dust from all electronic parts with blower and cleaning brush checking serviceability of all electronic parts including IGBT's SCR diode, HBC fuses, Capacitors, charger card, IP sense TX PCB, O/P sense TX PCB, protection card, SMPS card, driver card, LED display module, DC capacitors, AC fans, CD MCB's wiring, copper strips and replace if any part found defective, cleaning and greasin battary terminals of 30 Nos bateries all as specified and directed. Note:- (i) Successful bidder will have to submit AMC from OEM i.e. Microtek within one week of acceptance of contract. (ii) AMC will cover complete repair/replacement of US parts of UPS

S&F in replacement of stay wire ropes made out of stranded steel wire rope 8 mm dia maximum 25 mtr in length, jointing with 18 mtr long chimney of boiler, including construction of PCC foundation for grouting of M S Angle for supporting stay wire rope complete all as specified and directed.

R K ENTERPRISES