REPLACEMENT OF DAMAGED/NON REPAIRABLE LED STREET LIGHT 25, 45 WATT AND 200 WATT FLOOD LIGHT IN VARIOUS SECTOR-18, 21 and 25 T/NAGAR U/E KAITHAL.(INCLUDING THREE YEAR FREE MTC. AND DEFECT LIABILITY PERIOD FREE OF COST)

S/E of 200 Watt LED Flood light luminaries of with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened glass, IP-66 level as per specification attached. (With 3 years free replacement warranty at site including labour charges free of cost). (Make: Philips/Bajaj/LT/Panasonic/Wipro or equivalent approved make in HSVP) (Excluding GST)

Supply, Installation Testing and Commissioning of LED Street Light Fixture with Wattage range of (45 Watt) with body made of High Pressure Single Piece Die Cast Aluminum Alloy and cover made of PMMA (polymethymethacrylate) having system Lumen)120Ipw with inbuilt Protection against Short Circuit, Miswiring, Over Voltage and Surage Protection of 6 KV. The IP of fixture and Driver Compartment should be IP66 and same for the LED Compartment. The driving current should be ( 700mA with THD ( 5% and PF ). 90 and Operating Voltage between 120-270V and CRI ) 70 and Impact Resistance of IK)05. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect) (Including Three Years replacement warranty and three years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. (Make: Bajaj / Philips / LT/Panasonic/Wipro or equivalent make approved in HSVP).

Supply/erection/Installation/Commissioning of LED Street Light fixture with wattage range of (25 Watt) with Body made of Pressure Die Cast Aluminum Alloy and Cover made of PMMA (Polymethymethacrylate) having system lumen )100lpw with inbuilt protection against short circuit, Miswiring, over voltage and surge protection of 6kv. The IP of fixture and driver compartment should not be less than IP66. The driver should have THD ( 5% and PF ). 95 and Operating Voltage between 100-270V and CRI ) 75 and Impace Resistance of IK 08 as per approved make in HSVP. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacuturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years replacement warranty, mtc. defect liability period free of cost for three years Including Driver against any manufacturing defect). The logo of company should be embossed on the fixture. Make:- Phillips, Bajaj, GE, LT, PANASONIC