Construction of Shops 2nos at Sivanthangal knowledge centre Eastside(centre)

Amount

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Refilling the excavated earth including watering and consolidation layer by layer with all incidental charges etc complete

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification.Centering with Steel Plates including strutting,lining and levelling etc complete

a)For Plinth Beams and footings sides

b)Columns

c)Beams

RCC 1:1.5:3 mix using 20mm HBG Jelly from approved quarry

Supply and fabrication of RTS rods in various dia including cutting and bending etc

Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Filling with Well Gravel including watering and consolidation layer by layer with all incidental charges etc complete

Plastering for brickwork surfaces using cement mortar 1:5 (One part of cement, Five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation fin walls, manholes, inspection chambers, entrance & staircase steps etc., finished smoothly to one level including scaffolding, curing etc., complete, at all leads and at all heights.

Plastering for brickwork surfaces using cement mortar 1:3 (One part of cement, three parts of sand by volume) thickness 10mm (average) etc complete as per the direction of departmental officer

Fixing of Steel rolling shutters including cost and conveyence to work site and labour cherges etc complete

Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

Supply and Run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. conduit pipe concealed in wall and ceiling with continuous earth Wire connection by 14 SWG TC wire and making good of the concealed portion wiith suitable colour (SD 45)

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of box type 4' 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flurescent tube with PVC un sheathed copper leads from terminals to the fitting

Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300W regulator with 300mm down red on the existing clamp

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for requuired slope and the thickness of roof as required and well beaten with wooden beaters etc., completed

Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work M- 0668

M/S.VASANTHAM ENTERPRISES (BID ID -1095857)