Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.5 LAccepted-AOC | L-1 | Accepted-AOC Lowest and Reasonable | |
| 2 | L-2₹23.7 L+₹1.8 L (8.44%)Rejected-Finance NAROO PO ICHIGAM BADGAM KASHMIR 191111 J K | ICHIGAM | BADGAM | JAMMU AND KASHMIR | 191111 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹24.8 L+₹2.9 L (13.1%)Rejected-Finance | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹25.0 L+₹3.1 L (14.0%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest | |
| 5 | L-5₹26.7 L+₹4.8 L (21.9%)Rejected-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-5 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | M/S NAZIR CONSTRUCTION L9 | M/S maqsood enterprises L6 | M/S ABDUL REHMAN RATHER L10 | M/S FAROOQ AND SONS L1 | M/S GHULAM MOHAMMAD AND CO. L5 | M/S WANI AND SONS L14 | M/S ZAHOOR ENTERPRISES L11 | M/S GULZAR ENTERPRISES L8 | M/s PARVAZ CONSTRUCTION COMPANY L12 | M/S Abdul Ahad Rather L2 | M/S A.R TANTRAY L7 | M/S TARIQ AHMAD SHEIKH L3 | M/S M.R. Construction L13 | M/S SA INFRATECH L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down old existing plaster including scaffolding upto triple storey height, complete all as specified and as directed. | 82 | Square Metre | 100 ₹8,200 | 130 ₹10,660 | 150 ₹12,300 | 100 ₹8,200 | 50 ₹4,100 Lowest | 80 ₹6,560 | 200 ₹16,400 | 140 ₹11,480 | 90 ₹7,380 | 65 ₹5,330 | 98 ₹8,036 | 120 ₹9,840 | 100 ₹8,200 | 130 ₹10,660 |
| 2.00 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement including taking down old existing plaster, complete all as specified and directed. | 20 | Square Metre | 100 ₹2,000 | 140 ₹2,800 | 180 ₹3,600 | 90 ₹1,800 | 50 ₹1,000 Lowest | 70 ₹1,400 | 220 ₹4,400 | 140 ₹2,800 | 100 ₹2,000 | 70 ₹1,400 | 90 ₹1,800 | 125 ₹2,500 | 100 ₹2,000 | 120 ₹2,400 |
| 3.00 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. | 82 | Square Metre | 50 ₹4,100 | 40 ₹3,280 | 30 ₹2,460 | 50 ₹4,100 | 10 ₹820 Lowest | 25 ₹2,050 | 45 ₹3,690 | 30 ₹2,460 | 40 ₹3,280 | 70 ₹5,740 | 25 ₹2,050 | 30 ₹2,460 | 40 ₹3,280 | 28 ₹2,296 |
| 4.00 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. | 20 | Square Metre | 5 ₹100 Lowest | 10 ₹200 | 10 ₹200 | 12 ₹240 | 5 ₹100 Lowest | 7 ₹140 | 15 ₹300 | 6 ₹120 | 5 ₹100 Lowest | 15 ₹300 | 10 ₹200 | 12 ₹240 | 10 ₹200 | 19 ₹380 |
| 5.00 | Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring/changing of builders hardware, complete all as specified and directed. | 164 | Each | 50 ₹8,200 | 50 ₹8,200 | 100 ₹16,400 | 30 ₹4,920 | 120 ₹19,680 | 50 ₹8,200 | 50 ₹8,200 | 120 ₹19,680 | 135 ₹22,140 | 30 ₹4,920 | 30 ₹4,920 | 20 ₹3,280 | 50 ₹8,200 | 5 ₹820 Lowest |
| 6.00 | Demolition of cement / lime concrete from sunken portion in ground floors and paving n exc 15cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazzo tile / tiles, complete all as specified and directed. | 43 | Cubic Metre | 300 ₹12,900 | 50 ₹2,150 | 500 ₹21,500 | 30 ₹1,290 Lowest | 70 ₹3,010 | 100 ₹4,300 | 300 ₹12,900 | 1,000 ₹43,000 | 40 ₹1,720 | 90 ₹3,870 | 90 ₹3,870 | 800 ₹34,400 | 100 ₹4,300 | 90 ₹3,870 |
| 7.00 | M&L for water proofing treatment to sunken portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound, complete all as specified:
a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours.
(b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqm. This layer allowed to air cure for 4 Hours
(c) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete is still green.
(d) Joint of Trap/WC/Soil pipes shall be properly sealed with sealing compound.
Note:(a) Concrete for sunken slabs shall be mixed with WPC as per manufacturer's instructions before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage / dampness is seen in celiling below, then treatment is again carried out to RCC slab and it again tested before passing for next stage. (The rate quoted incluides water proofing compound as per manufacturers instructions).
(b) Please note that only floor area shall be measured for payment purpose. | 123 | Square Metre | 900 ₹1,10,700 | 500 ₹61,500 | 1,000 ₹1,23,000 | 140 ₹17,220 | 200 ₹24,600 | 350 ₹43,050 | 550 ₹67,650 | 1,400 ₹1,72,200 | 800 ₹98,400 | 110 ₹13,530 Lowest | 400 ₹49,200 | 1,200 ₹1,47,600 | 300 ₹36,900 | 750 ₹92,250 |
| 8.00 | M&L for plain cement concrete, 1:5:10, Type E-2 (using 40mm graded crushed stone aggregate) as filling in Sunken portion, complete all as specified and directed. | 43 | Cubic Metre | 2,000 ₹86,000 | 2,500 ₹1,07,500 | 2,500 ₹1,07,500 | 800 ₹34,400 | 700 ₹30,100 Lowest | 1,500 ₹64,500 | 4,000 ₹1,72,000 | 3,000 ₹1,29,000 | 1,900 ₹81,700 | 1,100 ₹47,300 | 1,200 ₹51,600 | 2,500 ₹1,07,500 | 2,500 ₹1,07,500 | 1,440 ₹61,920 |
| 9.00 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed. | 4 | Cubic Metre | 300 ₹1,200 | 50 ₹200 | 300 ₹1,200 | 2,000 ₹8,000 | 150 ₹600 | 100 ₹400 | 200 ₹800 | 400 ₹1,600 | 95 ₹380 | 100 ₹400 | 90 ₹360 | 150 ₹600 | 150 ₹600 | 45 ₹180 Lowest |
| 10.00 | M&L for 50mm thick plain cement concrete, 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, joint filled with bitumen sand mixer finished even and smooth without extra cement, complete all as specified and directed. | 80 | Square Metre | 100 ₹8,000 | 200 ₹16,000 | 210 ₹16,800 | 95 ₹7,600 | 75 ₹6,000 Lowest | 150 ₹12,000 | 200 ₹16,000 | 250 ₹20,000 | 140 ₹11,200 | 80 ₹6,400 | 160 ₹12,800 | 150 ₹12,000 | 200 ₹16,000 | 125 ₹10,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Garrison Engineer (AF) Air Force Station Srinagar 190 007
REPAIR TO FLOOR, BATHROOM AND SUNKEN AT CERTAIN SMQS UNDER GE (AF) SRINAGAR
2025_MES_739862_1
GE (AF)/SGR-54/2025-26
Open Tender
Civil Works
Item Rate
180 days
AOR of GE (AF) Srinagar
Please refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹90,000
Yes
19 Dec 2025
14 Nov 2025
6 Dec 2025
14 Nov 2025
4 Dec 2025
28 Nov 2025
Amount
M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down old existing plaster including scaffolding upto triple storey height, complete all as specified and as directed.
M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement including taking down old existing plaster, complete all as specified and directed.
Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring/changing of builders hardware, complete all as specified and directed.
Demolition of cement / lime concrete from sunken portion in ground floors and paving n exc 15cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazzo tile / tiles, complete all as specified and directed.
M&L for water proofing treatment to sunken portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound, complete all as specified: a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqm. This layer allowed to air cure for 4 Hours (c) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete is still green. (d) Joint of Trap/WC/Soil pipes shall be properly sealed with sealing compound. Note:(a) Concrete for sunken slabs shall be mixed with WPC as per manufacturer's instructions before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage / dampness is seen in celiling below, then treatment is again carried out to RCC slab and it again tested before passing for next stage. (The rate quoted incluides water proofing compound as per manufacturers instructions). (b) Please note that only floor area shall be measured for payment purpose.
M&L for plain cement concrete, 1:5:10, Type E-2 (using 40mm graded crushed stone aggregate) as filling in Sunken portion, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed.
M&L for 50mm thick plain cement concrete, 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, joint filled with bitumen sand mixer finished even and smooth without extra cement, complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., complete all specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.
M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed.
S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
S&F in repairs for 20mm bore tubes, medium grade, galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.
S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.
S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, pedestal pattern, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed.
S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.
S&F in repairs 15mm bore chromium plated wall mixer 3-in-1 system wall mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, complete all as specified and directed.
S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.
S&F in repair 600mm long towel rail of PTMT fixed with and including chromium plated brass screw and wooden / plastic cleats(minimum weight 190gms), complete all as specified and directed.
S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed.
S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed .
S&F in repairs 40 mm dia bore PVC flexible pipe for sink, complete all as specified and directed.
S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.
S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed.
S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed
S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed
S&F 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed.
S&F in repairs 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.
S&F in repairs 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.
S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.
Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 43,370.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
M/S Abdul Ahad Rather (BID ID -3487536)
M/S TARIQ AHMAD SHEIKH (BID ID -3486785)
M/S SA INFRATECH (BID ID -3489631)
M/S GHULAM MOHAMMAD AND CO. (BID ID -3488314)
M/S maqsood enterprises (BID ID -3489734)
M/S A.R TANTRAY (BID ID -3489118)
M/S GULZAR ENTERPRISES (BID ID -3486805)
M/S NAZIR CONSTRUCTION (BID ID -3489662)
M/S ABDUL REHMAN RATHER (BID ID -3489332)
M/S ZAHOOR ENTERPRISES (BID ID -3489862)
M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3489237)
M/S M.R. Construction (BID ID -3488977)
M/S WANI AND SONS (BID ID -3489415)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.12 MB
BOQ_828446.xls
BOQ • 2.01 MB
Tender54.pdf
Tender Documents • 1.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .