CA NO.CWE BLY/GE (E)/ 44 OF 2020-21 SPECIAL REPAIR TO BLDG NO P-7 (08 QTRS) AT MG ROAD AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Demolition of cement concrete (un reinforced) of roofs, floors (other than ground floors), bems, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate laid over roof slab complete all as specified and directed.

M&L for preparation of roof surfaces, applying a coat of bituminous primer @ 0.40 Kgs/Sqm and applying a coat of industrial bitumen grade 85/25 @ 1.2Kg/Sqm over primer and supplying and laying of APP modified polymeric water proofing memberane 3mm thick consisting 100micron HMHDPE film (weight not less then 3Kg/Sqm) and applying a coat of industrial bitumen grade 85/25 @ 1.2Kg/Sqm on top surface of membrane and torch application of membrane with 100mm overlaps at side and end lap where required and finally finished with and including a coat of aluminium paint @ 0.20 Ltr/sqm as per manufature instruction after taking down existing roof treatment complete all as specified and directed.

M&L PCC 1:2:4 type B-0 using12.50mm graded stone aggregate as in coping benching etc duly admixed with and including integral water proofing compound @ 2% by weight of cement including all necessary formwork (straight or curved) and finishing all exposed face of concrete fair and even including demolition of existing coping complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specfied and directed.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .0.30 Kg/Sqm and applying a coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 Kg/Sqm 2 mm thick consisting 100 mm micron HMHDPE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 Kg/Sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 unsing integral waterproofing compound @ 3% by weight of cement and taking down existing plastering complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specfied and directed

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

Supply only integral Water Proofing Compound complete all as specified and directed.

Taking down cement or lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on surfaces other than fair faces in cement mortar 1:6 finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on concrete surfaces of ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall applying two coats of oil bound emulsion (white or tinned) over a coat of chalk whitening complete all as specified and directed.

M&L for preparation old decorated surfaceof walls by complete removal of exisiting treatment and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified.

M&L for preparation of old wall surfaces applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint over a coat of cement wash with portland cemet slurry complete all as specified and directed.

M&L for preparation of newly plastered surface of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint over a coat of cement wash with portland cemet slurry complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Taking down steel/ wooden windows and ventilators of any size and description complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 , E-165 complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other specifically provided for complete all as specfied and directed

M&L for precast cement concrete Type B-1 1:2:4 using (20 mm graded stone aggregate) in landings, cover slabs (manholes etc) chullah hoods chajjas, water trough, shelves and similar articles with plain face set in cement mortar 1:4 complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 20mm graded stone aggregate as in Chajja complete all as specified and directed.

M&L for Form work to chullah hoods, chajjas, trough and similar works including edges complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia in reinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9 mm dia) complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

S&F framed work as in chowkats or frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiting (exclusive of steel, sheeting or other covering, running rails and guiside) and hanging also fastening and fixing complete all as specified and as direcetd.

S&F 35mm thick factory made flush shutters, solid core constructions with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F 125mm aluminium anodised handle, cast type complete all as specified and directed.

S&F mild steel 150mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ans fixed complete all as specified and directed.

S&F 150 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size aluminium handles,cast type, anodised complete all as specified and directed.

M&L cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in bed blocks for hold fast including necessary form work complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and directed.

M&L for 4.80mm thick frosted sheet glass, pin head type and glazing with oil putty n exc. 0.5 Sqm in each pane complete all specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 25mm thick flush shutters, solid core constructions with block board core and plywood face panels, commercial type on both sides and fixed to chowkats with screws complete all as specified and directed.

S&F mild steel butt hinges 75mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F 150 mm long hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

S&F 20 mm thick boarding with nails as in cup board shelves in any situation planed one side with butt joints complete all as specified and directed.

Dismantling water tank exc 250 ltr but n exc 500 ltrs and removing to store complete all as specified and directed.

S&F 500 litre ISI Marked rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20 mm dia gun metal, globe or gate valves , with iron wheel head, screwed both ends for iron pipe complete all as specfied and directed.

S&F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specfied and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking up or down 20 bore mm steel tubing and connections including cleaning for refixing complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

Refixing only GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

Refixing only GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

S&F stainless steel plate rack of size 31" x 36"x 10" three tire ISI marked and weight not less than 5 Kg complete all as specified and direcetd.

S&F MS fancy type curtain rod 20mm dia with coloured PVC layer with and including decorative knob and brackets complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n exc 0.11 Sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non-skid glazed coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate as in plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggeregate) finished the surface even and smooth using extra cement as in floor complete all as specified and directed.

Supply only Glass dividing strips, 3 mm thick 38mm width inserted in position complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base of floor for laying interlocking paver blocks complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointing in any mortar complete all as specified and directed.

M&L for 20 – 25 mm thick machine cut mirror polished kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing with and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 15 – 18 mm thick machine cut mirror polishing kota stone slab as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) with and including 10mm thick rendering in CM 1:4 finished even and rough complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 10mm thick rendering in CM 1:4 finished even and rough complete all as specified and directed.

S&F in repair 15 mm bore Bib taps, cast copper alloy chromium plated crutch or butter fly handle, screwed down, screwed down,screwed for iron pipe or for brass ferrule chromium plated with flange fixed complete all as specified and directed.

S&F in repair 15mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) high prssure screwed for iron pipe and fixed complete all as specfied and directed.

S&F in repair 15 mm bore angle cock fancy type chromium plated cast copper alloy crutch or butterfly handle screw, screwed both end for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 15mm bore PVC connections PTMT of length 450mm with nuts on both ends complete all as specified and directed.

S&F towel rail 450mm long PTMT (minimum weight 170gms) fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Taking down old 75 mm bore PVC/AC (SWR) pipes single socketed in any length and in any position with rubber ring of complete all as specified and directed.

Taking down old 110 mm bore PVC/AC (SWR) pipes single socketed in any length and in any position with rubber ring of complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends with oval access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends with oval access door complete all as specified and directed.

S&F 110 mm bore PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F in repair vitreous china squating pan "ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest with P or S trap, front or back inlet including PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and directed.

S&F in repair 32/40mm bore low density polyethylene pipes (LDPE) pressure rating 6 Kg/ cm2 of fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repair 100 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and directed.

S&F in repair grating dome 100mm dia with waste hole of PTMT (minimum weight 25 grams) complete all as specified and directed.

S&F in repair swivel shower of PTMT , any colour, for fixing with 15mm pipe (minimum weight 40 gms) complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

Supply only 32 mm dia waste coupling of PTMT (half or full thread) minimum weight 40 grams complete all as specified and directed.

S&F grating dome 100mm dia with waste hole of PTMT (minimum weight 40 grams) complete all as specified and directed.

S&F 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Excavation in trenches in soft/ loose soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 150 mm bore reinforced concrete pipes, class NP3, with one collar per length of pipe laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bedding for drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of holdfasts exceeding half brick and not exceeding one brick complete all as specified and directed.

Returning, filling in, any type of soil and spreading in layers not exceeding 25cm thick each layer including watering & well ramming complete all as specified and directed.

Removing exavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L brushing neat cement slurry with 3.0/Kg of cement per Sqm and complete all as specified and directed.

E/M Part:- Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down carefully by unserviceable main switch/ cut out/ DBs of any type/ capacity description as per existing at site including making good from BD box MCB SP/SPN/TPN of any size and capacity complete all as specified and directed.

&L for point wiring in concealed PVC conduit using 1.5 Sq mm single core, PVC insulated, unsheathed copper conductor cable 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS, duly painted with red oxide metal primer including fixing/ grouting sunken/ surface as per site requirement covered with 3 mm thick plastic laminated sheet including running up of 1.5 sq mm copper conductor, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etccomplete all as specified and directed for following point wirng :-

(a) One light point conrolled by one one way switch 5A, SP

(b) One ceiling fan/exhaust fan controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

(e) One bell point controlled with bell push

All as per item 129 above here in before but for 15 Amp switch socket out let on independent board with 2.5 sqmm FRLS (nominal area) cable PVC insulated but unsheathed copper conductor single core multistranded 1100 V grade including running of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and directed.

S&F switch piano flush type polycarbonate 5 A single pole one way complete all as specified and directed.

S&F socket outlet polycarbonate 5 Amps 3 pin multipurpose flush type complete all as specified and directed.

S&F switch socket combination out let 3/5 pin 2 in 1, 5/15 Amps multipurpose flush type 230 volt complete all as specified and directed.

S&F bell push flush type 5 Amp complete all as specified and directed.

S&F bell ding dong musical, AC 5 Amps capacity 230 volts single pole one way flush type complete all as specified and directed.

S&F of ceiling rose surface bakelite 65 x 50 mm 3 terminals AC 50 Hz 230 volts complete all as specified and directed.

S&F lamp Holder, insulated body surface bakelite with back plate suitable for angle batten fittimgs with wooden round blocks including LED lamp 9 watt cool day light of complete all as specified and directed.

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN 240V, 8 way with 200 Amps rated bus bar having IP-43 protection and double door concealed in wall including connection with thimbles as required with magnetic locking system complete all as specified and directed.

S&F in replacement of sheet metal enclosure for distribution board double door when MCBs to be used TPN 4 way with 200 Amp rated bus bar 415 V complete all as specified and directed.

S&F in replacement of MCB TPN, 63 Amp, 415 volts complete all as specified and directed.

S&F MCB 240V, single pole 6 to 40 Amps complete all as specified and directed.

S&F MCB 240V, single pole and neutral 32/40 Amps complete all as specified and directed.

S&F LED tube light fitting 20 watts, 230 volts, box type, with drive, internally wired etc with necessary mounting arrangements including all accessories with 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed.

M&L for sub main wiring 2 runs of single core 6 sq mm (FRLS) PVC insulated unsheathed, cable 1100V medium grade , multi stranded copper conductor drawn through and including non metalic rigid PVC conduit, medium grade, concealed in wall for sub main connection with accessories and fittings not less than 20 mm dia and one run of 6 sqmm (FRLS) single core multi stranded copper conductor cable as earth continuity conductor including taking down existing unserviceable sub main wiring complete all as specified and directed. (Note:- Two runs of 6.0 Sq mm cable one length and one run of 6.0 sq mmm copper conductor shall be measured as one unit length.)

S&F ceiling fan regulator 150 watts flush socket type with five steped range hum free AC 230 Volts complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion completion all as specified and directed.

S&F in replacement bulk head light fitting, IP 55 in enginnering plastic housing with clear prismatic diffuser with lamp of 1 x 9 watt LED with new 3 core multistranded copper conductor of size 23/0193 from ceiling to fitting complete all as specified and directed.

S&F security light fittingof 1x30 watt, 6000K and including connecting up with and provision of 1.5 Sq mm 3 core 1100 volts grade multistranded copper conductor cable from light fitting to junction box and including bracket made out of GI tubing 2.5 m long bend to required shape for fixing to wall/ poles with 02 Nos MA clamps made out of MS flat 40 x 5 mm with nuts bolts and washers complete all as specified and directed.

S&F copper winding exhaust fan size 300 mm sweep heavy duty single phase 240 volts 50 Hz and making connection complete all as specified and directed.

Cutting of wall for exhaust fan of any size and sweep and necessary fitting such as nut bolt and washers & Fastner and to make as per existing colour to match the wall complete all as specified and directed.

Taking down old unserviceabe meter panel box complete including disconnecting all connection carefully and supply, installation, commissioning and testing LT distribution meter board panel (cubical type), wall mounted for indoor use, factory made and tested (including CPRI type test certificate), double door with locking arrangement and handle, centre front opening. The panel shall be dust and vermin proof, IP 54 class protection and fabrication with 2.00 mm thick CRCA sheet duly power coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, glass cover for taking meter reading, having sufficient working space to accmodate these accessories:- (a) MCB DP 240 volt 63 A -05 Nos (b) Taking up/ removal of existing energy meter from old meter box and fixing the same in new meter box-05 Nos

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover over under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 41,599.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S DEEN ENTERPRISES

M/S MANSI TRADERS

SHREE RAM CONSTRUCTIONS

M/S CHAUHAN ELECTRIC WORKS

GAYATRI CORPORATION

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED

M/S ARVIND KUMAR CONTRACTOR