PROVN OF TRG SHED FOR 1 TRG COY AREA TRG BN OF THE GRENADIERS RC JABALPUR UNDER GE(WEST) JABALPUR

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metre for all kind of soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, for all kind of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil exceeding 1.5 KM but not exceeding 5 KM and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Plain Cement Concrete( 1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate in foundation, including rafts, footings, beams, plinth beams; bases for columns; etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) (20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) (20 mm aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for form work smooth finishes to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar works; vertical or to batter, complete all as specified and directed.

M&L for form work RECTANGULAR FLAT fair finishes to sides of pillats, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L for Formwork RECTANGULAR FLAT fair finishes to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc., complete all as specified and directed.

M & L for formwork FLAT fair finishes to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete finish, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia and over, as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete internal surface in cement mortar ( 1:6), finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick wall or concrete external surface consisting of two layers, under layer of 10mm thick in CM (1:4) & top layer of 5mm thick in cement mortar 1:4 mixed with liquid water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Liquid Water proofing compound shall be measured and paid for separately as " Supply only".)

M & L Moorum / red bajari filling in floor or pavings, laid in layers n. exc 15 cm thick, spread, levelled and rammed including watering as required, complete all as specified and directed.

M &L Hardcore of guage n exc 63 mm, deposited, spread and levelled n. exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L 100 mm thick PCC (1:2:4) type B-2, using 40 mm graded crushed stone aggregate as in flooring with surface finishes even & smooth without using extra cement complete all as specified and directed.

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through Manufacturer / authorized applicator of the manufacturer, properly cleaning & drying the concrete surfaces complete :-

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM (1:3) when concrete is still green, mixed with liquid water proofing compound as per Manufacturer's instructions complete all as specified and directed. ( Note : Liquid water proofing compound shall be measured and paid for separately as " Supply only".)

Applying evenly a prime coat of bitumen based primer conforming to IS : 3384-1965 at 0.3 kg/ Sqm after obtaining seepage/leakage proof condition of roof surface including cleaning pastered roof surfaces .

Laying unrolled over the bitumen coated surface, 3 mm thick APP modified polymeric water proofing membrane weighing not less than 3kg /Sqm, laid and bonded to the sub-strata by heat process, overlaps shall be sealed/fused by flame torch application to be carried out through approved authorised Applicator as per Manufacturer's instructions, with 100 mm side overlap and 150 mm end overlap shall be sealed by flame as per Manufacturer,s instruction.

Applying two coats of bituminous base aluminium paint with 0.2 kg /sqm on Surfaces including preparation complete

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.

M & L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glazing shall be measured and paid for separately against relevant item of this BOQ

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M & L pre-polished Machine cut Kota stone slab flooring 18-20 mm thick (size 595 x 595mm), laid over and including cement screed base 15mm thick in CM(1:6), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing complete all as specified and directed.

M & L pre-polished Kota stone slab 10-12 mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar (1:4) , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

M&L for providing Reinforced cement concrete M-25 ( Design Mix)(using 20mm graded stone aggregate) for fins, fascias, louvres, parapets, and railings exc 60cm in height, newels, balustrade and the like, complete all as specified and directed.

S&F Stainless steel(SS-304) conduit curtain rod, fancy type, 20 mm dia, of any colour including end globe as approved including side mounting complete all as specified and directed.

S&F Stainless steel Bracket fancy type for curtain rod 20 mm dia, of any colour as approved complete all as specified and directed.

S&F 100mm long butt hinges medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed, complete all as specified and directed.

S&F 150mm long aluminium anodised handle cast type and fixed,complete all as specified and directed.

S&F alluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 250 mm long etc. complete all as specified and directed.

S & F mortice Lock 4 lever with all fittings for aluminium door complete all as specified and directed.

S & F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.

M & L rendering 5mm thick on ceiling in cement mortar (1:3) finished fair and even smooth without using extra cement complete all as specified and directed.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces complete all as specified & directed..

M & L applying two coat of oil bound distemper on newly plastered or unplastered wall surfaces including preperation of surfaces over a coat of Primer and including 2mm thick wall care putty in two layers on walls complete all as specified & directed.

M&L for PCC (1:2:4) Type B-1 using 20mm graded stone aggregates, as in surface channels and drains complete all as specified and directed.

Extra work forming fair finished drain or channel over 60cm inner girth in cement concrete complete all as specified and directed.

M & L Providing cement concrete PCC (1:2:4) Type B-1 using 20mm graded stone aggregates as in seismic and other similar band coping , including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ laid in floor with & including necessary clamps of required size etc complete all as specifed & directed.

S & F GI wire netting 0.91mm dia and size of mesh 12mm in walls, ceiling, stanchions, beams etc complete all as specified and as directed.

M&L forming square grooves in plaster n exc 15cm in girth and trimming surface complete all as specified and directed

M&L for 100 mm thick cement concrete (1:3:6) Type C-2, using 40mm graded crushed stone aggregate as in floor with the surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resitance exterior paint of required shade (Company depot, tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and as directed.

M&L for mild steel work conforming to Fe-290 Gde E-165 as in hand rail, holdfast, half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium door and ventilator shutters, side hung type without sash bars, aluminium sections weighing 2 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and as directed.

S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (Notes : (i) Unit rate quoted against this item includes for provision of PVC protected sheeting and its removal after fixing the frame work. (ii) Hinges and lugs shall be measured and paid for separately. (iii) Weight of joining cleat shall be added to main frame.)

M&L for formwork to fins, louvres, fascia, flat, fair finished surface of concrete, complete all as specified and directed

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006, of 80mm thickness, M-40 Grade, laid over and including 50mm thick sand cushioning complete all as specified and as directed.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and includig concealed PVC conduit not less than 20mm (ISI marked) Including all fitting and fixing and accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

One light point controlled by one switch 5/6 Amp.

One fan point/exhaust fan controlled by one switch 5/6 Amp.

One socket point controlled by one switch 5 / 6 Amp on same board.

One socket point controlled by one switch 5/6 Amp on Independent board.

Description all as per item No 63 here in before but with 1100 volts grade stranded copper conductor cable of size 2.5 Sqmm with 2.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15Amp on independent board complete all as specified and directed .

M&L for fan regulator socket type AC 230 volts complete all as specified and directed.

M&L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified ad directed .

M&L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed .

M&L for Switch socket combination 3 pin 5 and 15 Amps AC 230 volts flush type complete all as specified and directed .

M&L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed .

Supply & Fixing Smart bright batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and efficient, Flicker free start Inbuilt driver intil Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1/ISL 10322(Parts/Secl) , report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed .

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp, pf 0.98, 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt, no of blades three, type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete all as required and directed .

S&F Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed .

S&F MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed .

S & F MCB single pole 240 volts 6 to 40 Amps, B Series complete all as specified and directed .

Supply & fix LED Security Light Luminaire 35 watt 6000k with high power LED cool white, CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base pole adapter powder coated pressure die medium Grade not less than with 1.2m. long in angular shape with 2 nos of pole fitting clamps, made out of MS flat, nuts and bolts and painting with two coat of aluminuim paint over a coat of primer complete all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar triple pole and neutral 415 V, 4 Ways, double door type, complete all as specified and directed. With Incoming MCCB of 100 Amps Capacity complete all as specified and directed .

S& F MCB TPN 40 to 100 Amps, 240 Volts, minimum 10 KA, "B" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed (Note :- Proper and suitable size cable copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)

M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Supply and fixing Single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 450 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC complete all specified and as directed.

Supply , laying and testlng cable XLPE insulated , screened PVC bedded , galvanized , steel strip or wire armoured , electric power cab les (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge. ( Note : Excavation and earthwork, sand cushioning and cable protection shall be measured and paid for separately against relevant items of this BOQ.)

(e) One No danger notice plate of size 200 X 150 X 1.6mm thick mild steel sheet vitreous enameled white and letter figure and conventional skull and bones of signal red colour and fixed/riveted with panel of suitable size. (f) Copper wound with CTR 100/5 -03 Nos Incoming:- LT MCCB, 4 pole , 415 volts, 16KA, 63 Amps - 01 No. Outgoing:- (i) LT MCB , 4 pole, 415 volts, 10KA, 32 Amps-03 Nos. (ii) Metering equipment complete for incoming and outgoing feeders-1 Job (NOTE:- All , MCCB should be rotary handle, microprocessor release adjustable type)

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. ( Note : Punned thickness shall be considered for the payment purpose.)

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with fly ash bricks laid dry and flat complete all as specified and directed .

M&L for GI Tubes, of size 40 mm dia medium grade, galvanised, with all fitting and fixing complete for supporting the cable protection in the roads complete all as specified and directed.

M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron earth strip 32x 6mm, by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm TMT bar @ 75 mm C/C both ways, charcoal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI earth strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rate as quoted by the contractor.

J.P ENTERPRISES (BID ID -3091130)

M/s PARASRAM MULCHANDANI (BID ID -3070809)

M/S Modern builders (BID ID -3066747)

C L BHATIA (BID ID -3069542)

M/s Ram Associates (BID ID -3083218)