Construction work of Deep Drain from Yamuna action Plan Boundary to Hanuman Ghat.

Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1.5 etre and lead upto 30m & including filling, wateringand ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal or surplus earth as directed by the Engineer in charge of 30m from the foundation trenches.

Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing and laying cement concret in M-15 not lass then strength of M 1:50 stone grit 20mm. Nominal size………..all complete(S.I. No. 279a)

R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T & P etc. required for proper completion of the work. binding wire cost being included in the item. above but in R.C.C. T beam and slab roofs and R.C.C. columns for drain

Mild steel or iron in plain work such as reinforced concrete or reinforcement brick work(when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion of the work and including supply of all steel and wastage and over lapping and hooks.

M.S. or iron work of small sizes and section such as holdingi down bolts, hold fast, tieods grading etc. wrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work, Same as in item 502 above but in heavy sizes such as trusses, Builty up gates record rack roof work gates etc. including rivetting or welding where necessary

Add 18.00% G.S.T.