Reconstruction of Middle School Taru. (Under District Capex)

Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, asdirected by Engineer-in-charge. All kinds soil. ( 60% )

Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, asdirected by Engineer-in-charge. Ordinary rock ( 40 % )

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil.

providing and fixing dry stone soling in horizontal including cost of stone.

Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)pcc

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse s,and : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Centering and shuttering including strutting, propping etc. and removal of form for Footing , pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete job 25mm thick with 12.5 mm nominal size stone aggregate.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size

Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Second class Kail wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class kail wood.

Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4 mm thick float glass panes, including ISI marked M.S. pressed butt hingesbright finished of required size with necessary screws. Second class teak wood 30 mm thick.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat ofneat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood All complete jobs .

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coatwith cement primer.

French spirit polishing : Two or more coats on new works including a coat of wood filler.

providing and fixing of wooden panelling 4'' width 12mm thick playwood icluding Fixing and polishing All complete job

Proving and Fixing of Readymade PVC Ceiling All complete jobs.

Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm,laid in floors, and landings, jointed with neat cement slurry mixed with pigmentto match the shade of the tiles, including rubbing and polishing complete, on 20mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cement.

Providing and Fixing of 12 mm thick pre laminated flooring of approved brand as per direction of Engineer in charge Complete job AC 4.

Providing and laying 40mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-incharge.

Steelwork inbuiltuptubular (round, squareor rectangularhollowtubesetc.) trusses etc., including Hot finished welded type tubes.( 75x25x3.6mm).

ProvidingcorrugatedG.S. sheet roofing including vertical / curved surface fixed with polymer coatedJorLhooks,boltsandnuts8mmdiametrewithbitumenandG.I. limpetwashers orwithG.I. limpet washers filledwithwhite lead,includingacoatofapprovedsteel primer and two coats of approved paintonoverlappingofsheetscomplete(uptoanypitchinhorizontal/verticalorcurvd surfaces),excludingthecostofpurlins,raftersandtrussesandincludingcutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated areawith perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer'sspecification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.61

Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in Charge.

Carriage of cement and steel an avg lead 20 km bt MT

Carriage of sand and aggregate avg lead 20 km by MT

Carriage of stone an avg lead 5 km by MT.

Wiring for light point 6amp socket/exhaust fan point /call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 075 Sq.mm. FR PVC insulated copper conductor Single core cable as required.

Wiring for 16amp socket outlet with 4mm sqmm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required.

Supplying and fixing of 25mm PVC conduit capping along wíth accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box cornplete as required including connection.

Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as requird..

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as required

Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess comnplete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 24 way double door SPN.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips.

Supply of 1100 volt grade aluminium conductor KPLE insulated PVC sheath arranged complete as per specification as required 25 sqmm, 2 core.

Wiring for changeover 63 amp and installtion with complete accessories and holes on the wall as required.

Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia GI pipe ISI marked and 3 meter length, with 40mm x 6mm thick, the electrode should be hot-dipgalvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC.

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required.A) Single pole 6/10/20 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. B)Double pole 63 Amp

Junction box 3 inchs 250 grams G.I with holes for connections submersed in concrete with connections as required.

Supplying and providing in place exhaust fan 200mm of apporved brand. Phillips Havells.

4 modular plate

6 modular plate

8 modular plate

12 mudulr plate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore.

Providing and fixing flow trap of PVC.

Providing and fixing soil, waste and vent pipes 100mm dia PVC

Providing and fixing soil, waste and vent pipes 75mm dia PVC.

Providing and fixing plain bend of required degree. 100 mm dia pvc.

Providing and fixing plain bend of required degree. 75 mm dia pvc.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.)A) PN-16 Pipe, 25 mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.) (B) PN-16 Pipe, 32 mm OD (SDR-7.4)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing of pipe with heat wire 25x13mm nitrile insulation pipe, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of engineer in- charge.

Providing and fixing of insulation for water storage tank with 25mm nitrile sheet, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of engineer in- charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 gms.

Providing and fixing C.P Jalli.

Providing and fixing C.P Brass angle valve for basin, mixer and geyser.