Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹91.7 L
EMD Value
₹1.8 L
Closing Date
29 Sept 2023, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
EXECUTIVE ENGINEER
Providing FHTCs to 160 Households in Aphigal AND other 6 Habitation of Heravali Village Honnavar Taluk Uttara Kannada district through Augmentation of Water Supply Scheme to Honnavar Town AND Enroute 9 GP by KUWSSB
RWSSD/2023-24/WS/WORK_INDENT2263/CALL-3
RWSSD/2023-24/WS/WORK_INDENT2263/CALL-3
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Karwar
7 documents required · 7 mandatory
MANDATING SATISFACTORY COMPLETION AS A PRIME CONTRACTOR FOR AT LEAST ONE SIMILAR NATURE WORK TO AN EXTENT OF 50% OF THE COST OF THE WORK, RS.45.83 LAKHS IN LAST 5 YEARS (2018-19 to 2022-23)
TENDERER MUST HAVE COMPLETED PHYSICAL WORK DONE AS PRESCRIBED IN BID DOCUMENT FORMAT 3.2C IN LAST 5 YEARS (2018-19 to 2022-23)
ACCURATE POSTAL ADDRESS AND PHONE / MOBILE NUMBER
THE TENDERER SHOULD POSSESS VALID GST REGISTRATION
PAN CARD COPY
THE TENDERER SHOULD POSSESS VALID REGISTRATION OF APPROPRIATE CLASS WITH PWD DEPARTMENT AS PER TENDER CONDITION
TENDERER MUST HAVE ASSESSED AVAILABLE TENDER CAPACITY AS PER FORMULA IN SECTION 3.6 IN LAST 5 YEARS (2018-19 to 2022-23)
PROFIT & LOSS ACCOUNT FROM CHARTERED ACCOUNTANT FOR LAST FIVE YEARS (2018-19 to 2022-23) TENDERER MUST HAVE ACHIEVED IN AT LEAST TWO FINANCIAL YEARS A MINIMUM FINANCIAL TURN OVER(IN ALL CLASSES OF CIVIL ENGINEERING CONSTRUCTION WORKS ONLY) OF RS. 91.66 LAKHS PER FINANCIAL YEAR (USUALLY NOT LESS THAN THE ESTIMATED COST UNDER THIS CONTRACT )
THE TENDERER MUST SUBMIT LIQUID ASSETS AND /OR AVAILABILITY OF CREDIT FACILITIES OF NO LESS THAN RS.55.00 LAKHS (CREDIT LINES/ LETTER OF CREDIT/ CERTIFICATES FROM BANKS FOR MEETING THE FUND REQUIREMENT ETC. (USUALLY THE EQUIVALENT OF THE ESTIMATED CASH FLOW FOR THREE MONTHS IN THE PEAK CONSTRUCTION PERIOD)
EXECUTED IN ANY ONE YEAR IN LAST 5 YEARS (2018-19 to 2022-23), THE FOLLOWING MINIMUM QUANTITIES OF WORK: GI/CI/PVC/MS/DI/HDPE-PIPELINE 10713.6 METER CONCRETE 145.76 CUM EARTHWORK 4063.07 CUM
THE TENDERER MUST SUBMIT ONGOING WORK COMMITMENTS (CERTIFIED BY AN OFFICER NOT BELOW THE RANK OF EXECUTIVE ENGINEER) TO COMPUTE AVAILABLE TENDER CAPACITY IN LAST 5 YEARS (2018-19 to 2022-23)
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
₹2,300
₹1.8 L
20 Sept 2023
20 Sept 2023
30 Sept 2023
25 Sept 2023
25 Sept 2023
PUMPING MACHINERY
Pumping Machinery for water pumping : Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. c 1x3x4...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. c 50mm
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 55mm
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...
Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. 63 mm
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. cable in new tr...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Rising Main from Intermediate sump to Heravali ELSR: Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying and installing of Electofusion coupler 63mm
Electofusion Tee 63mm
Electofusion Elbow 63mm
Electofusion Endcap 63mm
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Estimate OF ELSR 20 KL 12 M Staging : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
RCC M30 Design Mix with 20mm aggregate for 6.0m upto 9m height
RCC M30 Design Mix with 20mm aggregate for 9.0m upto 12m height
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top slab of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for fLC.C. work including straightening, cut:ting, bending, placing in position, binding and anchoring to adjacent member...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
80mm dia for oulet (a) 1.0mt length
80mm dia for scour (a) 1.0mt length
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...
Scour Valve 80mm dia
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work sit...
SUB ESTIMATE FOR RCC VALVE CHAMBER 1.50x1.50: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for fLC.C. work including straightening, cut:ting, bending, placing in position, binding and anchoring to adjacent member...
Supply and fixing of Horizontal Mechanical Woltman type hemeticallysealed water meters with copper Glass register with IP 68 protection. Themeter shall be removable mechanism type manufactured as ISO ...
Distribution Network: Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barri...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. Cutting asphalt Road surface...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Macadam Road
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Cutting Cement Concrete Road ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying and installation of Electrofusion Coupler 63 mm
Electrofusion Coupler 75 mm
Electrofusion Coupler 90 mm
Electrofusion Tee 63 mm
Electrofusion Tee 75 mm
Electrofusion Tee 90 mm
Electrofusion Elbow 63 mm
Electrofusion Elbow 75 mm
Electrofusion Elbow 90 mm
Electrofusion Reducer 75X63
Electrofusion Reducer 90X75
Electrofusion Endcap 63 mm
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Surface Box H4057 MD-KU
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
RATE ANALYSIS FOR RCC VALVE CHAMBER 0.50x0.50: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar work...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for fLC.C. work including straightening, cut:ting, bending, placing in position, binding and anchoring to adjacent member...
SUB ESTIMATE FOR NEW HOUSE HOLD : Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, stru...
Approved make electro fusion saddle comply with BS EN 12201-3:2011. PN-12.5 rating and food grade raw mateial as per BS 6920 for effect on water qualityintended for human consumpution material of conm...
Suppling MDPE Pipe grade PE80 6kg/cm2, 5,3mm thick Complete as per Specification
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
For crossing drain 32mm dia
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any. 15mm dia
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 15mm dia
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. 15mm dia
Flow control valve 5 LPM/10LPM/ 15 LPM Providing, & fixing Flow control Valve Using food Grade materials SS 316 ball /1/2"[15mm]including cost of all materias labourcharges, HOM and testing complete a...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 withits latest amendments of following size to service connectio...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing stand post to FHTC: Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for fLC.C. work including straightening, cut:ting, bending, placing in position, binding and anchoring to adjacent member...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Providing and fixing of typical Logo board as perspecifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted withMS Square angle 25mm x25mmx 5mm size on back and on...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw 3 RWSSD2022-23WSWORK_INDENT_59358.doc
Tender Document • 0.27 MB
LOC.docx
Others - LOC • 0.01 MB
TENDER NOTIFICATION 20-09-2023.pdf
Others - TENDER NOTIFICATION • 2.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .