Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC As per BOQ | |
| 2 | L2₹30.5 L+₹1.3 L (4.30%)Rejected-Finance | L2 | Rejected-Finance As per BOQ | |
| 3 | L3₹36.9 L+₹7.7 L (26.2%)Rejected-Finance | L3 | Rejected-Finance As per BOQ | |
| 4 | L4₹39.2 L+₹10.0 L (34.3%)Rejected-Finance 1 CHUNNA BHATTA PANIGHAT BAMBOOFLAT PORTBLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744107 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744107 | L4 | Rejected-Finance As per BOQ |
Tender Value
₹30.6 L
EMD Value
₹61,200
Closing Date
6 Dec 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
Deep Bhavan, 44 B S Road, Phoenix Bay, Port Blair
Construction of Store cum Oil Room at Campbell Bay DGPS Station
2022_DGLL_722147_1
CM-PB-02017/1/2022-CM-PB
Open Tender
Civil Works - Buildings
Item Rate
270 days
Campbell Bay
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹61,200
Yes
Deep Bhavan Port Blair
7 Mar 2023
9 Nov 2022
7 Dec 2022
9 Nov 2022
6 Dec 2022
9 Nov 2022
16 Nov 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (in all kinds of soil)
Supplying and filling in trenches, plinth, sides of foundations, floors etc. with morrum/ river coarse sand in layers not exceeding 20 cm. in depth including watering, ramming, consolidating and dressing etc. complete with supply of all labours, tools etc. complete as directed by enginer in charge.
Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation and plinth including laying, compacting, curing, supply of materials, tools, labours etc. complete as directed by the engineer in charge but excluding the cost of centering and shuttering
Centering and shuttering including strutting, propping etc. and removal of form for foundation, lintels, beams, slab etc. including supply of labour, tools, materials etc. complete as directed by Engineer In Charge.
Foundations, footings, bases of columns, etc. for mass concrete
Floor slab, roof slab, shelves etc.
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Providing and laying in position reinforced cement concrete of grade 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) but excluding the cost of centering, shuttering and cost of reinforcement, including laying, compacting, curing and supply of all labours, tools & plants, materials etc complete as directed by Engineer In Charge.
All work up to plinth level
above plinth level up to floor five level
Supply, fabrication, hoisting and placing in position HYSD reinforcement bars (SAIL/ TATA/ IISCO / RINL/ JINDAL etc.) conforming to IS 1786 - latest edition Grade FE 415 / 500 as per detailed drawing and specifications including cutting, bending and tying with 18 SWG binding wire complete for all heights and depths as directed etc. complete including supply of all labours, tools, materials etc. complete as directed by the engineer in charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m including supply of all labours, tools & plants etc. complete.
Hard stone soling/ pitching laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface, supply of all materials, labours, tools & plants etc. complete as directed by the Engineer In Charge.
Supply and stacking
Stone pitch laying
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation and plinth including laying, compacting, curing with materials, tools, labours etc. complete as directed by the Engineer In Charge but excluding the cost of centering and shuttering (C.C. Flooring bed).
Providing and fixing up to floor five level precast cement concrete hollow block of cement concrete grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)., including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including supply of all materials, labours, tools & plants and cost of required centering, shuttering, scaffolding etc. complete as directed by the Engineer In Charge.
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including supply of all labours, tools & plants, materials etc. complete.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
Providing and fixing in position fully glazed aluminium sliding window with powder coating of approved shade up to 15 micron with 5mm tinted glass of Saint Gobain or equivalent as per drawing or as directed. Extruded all sections should be of Jindal make or equivalent series B 18mm available in ALLOY 63400 and temper WP (HE9WP) corresponding to IS: 733 and IS: 1285 to be used for frame top and side (Unit wt. 1.06 Kg/m) and for bottom (Unit wt: 1.248 Kg/m) and shutter top and bottom (unit wt. 0.607 Kg/m) and shutter side (handle) (unit wt: 0.547 Kg/m). Aluminium sections shall be smooth, rust free, straight, mitred and only mechanical joints shall be used, welding shall not be permitted. Concealed lock of Indigo or equivalent and P.V.C. gasket is to be used in work. Aluminium Sections fixed with Raul plug and screws or with fixing clips or with expansion hold fasteners, including cleat angle, aluminium snap beading for glazing and 4 mm thick pin headed glasses for all openings provided for windows including supply of all materials, labours, tools & plants etc. complete as directed by engineer in charge.
Providing and fixing 205 X 19 mm stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in-charge complete.
Providing and fixing aluminium tubular handle bar 32 mm outer dia (Powder coated minimum thickness 50 micron aluminium tubular handle bar), 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge
Structural steel work in single section, of fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Outer Frames in 45 x 45x 5 mm angles with 12 mm Sq Bars 100 mm C/C)
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover
15 mm thick Cement Plaster in single coat on rough side of single or half brick wall for interior/exterior plastering up to floor two level, including arises, internal/external rounded angles chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth in CM 1:4 (1 cement: 4 coarse sand) including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge.
Making Chases up to 7.5cm x7.5 cm in walls including making good and finishing with matching surface after housing PVC Concealed wiring pipe etc., including supply of labours materials tools labours etc., as directed by the Engineer In Charge but excluding the cost of PVC Pipe (PVC Pipe will be suppliued by the department)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. including supply of all materials, tools, labours etc. complete as directed by the engineer in charge.
Providing drip moulding 35 mm wide drip course/groove in plastered surface or moulding to RCC projections such as chajjas slab projections as and wherever directed withn cement mortar 1:2 (1 cement:2 coarse sand) including supply of all labours materials tools etc complete as directed by the engineer in charge
Making plinth protection 100 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
25 mm thick Kota Stone
Applying priming coats with water thinnable cement primer on wall surface of approved brand and manufacture to give an even shade etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two coats)
Finishing walls with 1st quality Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Asian/ Snowcem/ Berger) on new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) at all heights to give an even shade etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge.
Painting with synthetic enamel of approved brand first quality paint wood & wood based surfaces to give an even surface after thoroughly brushing the surface with sand paper, scrappers to remove all dirt’s, spots, loose pieces of scales, cleaning, preparing the surface and filling the holes by with wood filler etc. wherever required including a coat of wood filler and supply of all materials, labours, tools etc. complete as directed by the engineer in charge.
Painting with synthetic enamel of approved brand first quality paint Steel & Metal based surfaces to give an even surface after thoroughly brushing the surface with sand paper, scrappers to remove all dirt’s, spots, loose pieces of scales, cleaning, preparing the surface and filling the holes by with wood filler etc. wherever required including a coat of wood filler and supply of all materials, labours, tools etc. complete as directed by the Engineer In Charge.
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete
0.80 mm thick with zinc coating not less than 275 gm/m²
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion includes jointing of pipes & fittings solvent cement, trenching, refilling & testing of joints complete as directed including supply of all materials, labours, tools etc. complete as directed by the Engineer In Charge
110 mm Dia PVC Pipes
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
R S L CONSTRUCTION
KML CONSTRUCTION
B.Babu Rao
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .