ADDN/ALTN TO CHANGING ROOM FACILITIES, SECURITY WATCH TOWER, PROVN OF METALLIC WIRE MESH ALLIED WORK FOR IR NETS,SHED/SHELTER

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Eng -in-charge

M&L for cement concrete Type B0 (1:2:4) 12.5 mm graded aggregate for packing hold fasts in wall complete all as specified and directed.

M&L for Rendering 10mm thick cement plaster CM 1:4 on fair faces of concrete surface other than fair face of brick-work or on one side of lathing

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed by Eng -in-charge

Fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed by Eng -in-charge

S&F PVC flexible 60 mm wide with 10 mm bend & covered on MS flat and 10 mm thick cover for hand rail n exc 10 cm complete all as specified and directed

M&L for preparation of new plastered surface with two coats of white washing complete all as specified and directed.

M&L for preparation of New surface of steel with one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed

Taking down shutters with chowkats or frames of size n exc 1.50 m complete all as directed and specified

Taking down shutters with chowkats or frames of size exc 1.50 m and n exc 4 .00 m complete all as directed and specified

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.

S&F for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bedding of 15mm thick in CM 1:6 complete all as specified and directed

M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded crushed stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 6 complete all as specified and directed

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for rendering 10mm thick in CM 1:4 on stone including finish even and smooth surfaces without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on stone /concrete including finish even and smooth surfaces without using extra cement complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, over a coat of chalk whiting complete all as specified and as directed.

M&L for new plastered /unplastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3mm birla white putty complete all as specified and directed by Engr-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

S&F 8/9mm thick pre laminated interior grade both sides laminated board to be fixed on aluminium frame with proper fittings , rubber packing and screws complete all as directed by Engineer-in-charge

S&F stainless steel grade SS-304 curtain rod with SS brackets fixing with ss screws complete all as specified and directed.

S&F mild steel peg set 5-6 hooks in each piece complete all as specified and directed .

S&F MS Fe -410 W gd E-250 quality B framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed .

M&L for preparation of new treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer in complete all as specified and directed

M&L for Pressed steel frames size 105 mm and 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F 2nd class hardwood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed .

S & F 30 mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F factory made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with prelam sheet as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section , complete all as specified

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type, anodised , complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty/ rubber beadings in squares n exc 1 sq. m in each pane, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in PCC filling in hold fast, PCC work and similar work incl necessary form work. complete all as specified and as directed.

Supply only chain link MS galvanized fencing of any mesh size and type. Note: Fixing shall be measured and paid separately.

Fixing only chain link fencing including line wires, any mesh size and type of standards rail straining barbs etc incl permission of binding wire.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base.complete all as specified and directed.

M&L for machine cut kota stone slab flooring , 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer 20mm thick in CM(1:6) complete all as specified and directed.

M&L for preparation of existing plastered surface and applying one coat of Weather Coat Paint @ 0.83 Ltr/10 Sqm over one coat primer @ 1.10 Kg/10 Sqm of any colour. complete all as specified & directed by Engineer-in-Charge

M&L for vitrified ceramic tiles 10mm thick ( square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, skirting and similar work etc, set and jointed in neat cement slurry and pointed in light shade cement to match incl screed bed or bedding layer 15mm thick in CM(1:4). including dismantling of old tiling Complete all as specified and directed.

M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted . complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar exc one brick but not exc two bricks complete all as specified and directed.

S &F for Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete , steel conforming to Fe-410- W(Gde- E-250) quality B

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E-165) quality-B complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Hardcore of guage exc 63mm broken sone or boulders but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as secified and directed.

M & L for cement concrete 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base floor concrete complete all as specified

M & L for 40 mm thick cement concrete 1:2:4 type B 0 using (12.5 mm graded stone aggregate) as in floor finish even and smooth with out using extra cement, concrete complete all as specified

M&L for 4mm dia galvanised iron or steel wire to be tied and anchored between blast and pen and traverse at any height complete all as specified and directed.

M&L for Point wiring for One Light/Fan point controlled by one way switch 6/5 Amp with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One 3 pin socket outlet 6/5 Amps on the same board with other switches

S&F Switch piano flush type (ISI marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F socket 2 in 1, 3 pin, 6/5 Amp piano flush type (ISI marked), 240 Volts complete all as specified & directed.

S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed.

S&F stepped type electronic fan regulator flush type complete all as specified & directed.

S&F LED tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator, suitable fixing arrangement in roof/ceiling and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC).

Rasam Engg Co. (BID ID -3184394)

m/s sai construction company,bijarar (BID ID -3185625)

M/s RAAJSHREE INFRA (BID ID -3185022)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3185162)

H R ENGINEERS (BID ID -3185260)