PROVN OF TOILET WITH SEWAGE SYS DRINKING WATER PT PARKING SHED IN TRG AT 4 MAHAR AND SPL REPAIR TO WPT OF WG A OF BLDG NO PC 06 AT SW DIV UNDER GE MAINT INF SCHOOL MHOW

Amount

B/R PORTION:

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth, for foundation, etc or for shafts,wells cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and getting out in any type of soil all as specified.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rought finished surface of concrete complete all as specified.

M&L for RCC M-25 design mix concrete as in foundation, footings, plinth protection and similar RCC works all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item

M&L for Formwork to sides of concrete flat or curves sides of pillars,posts, struts,piers,columns and stanchions rough finished surface of concrete .complete all as specified.

M&L for RCC M-25 design mix concrete as in column, pillars, piers, posts and struts complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.

M&L for Form work to sides and soffits of floor or roof beams haunching, lintel, column, cantilevers shelves includig supported over hangs etc, complete rough finished flat surface of concrete.

M&L for RCC M25 design mix concrete as in Beams, Cantilevers, brussumenrs, lintels over than 1.50 Span complete all as specified and directed. NOTE : Reinforcement shall be measured and paid separately under relevant item

M&L for use and waste of formwork to sides and soffits of slab such as roof slab,floor slab,landing and similar work, etc not exceeding 200mm thick, rough fnished surface of concrete flat complete all as specified.

M&L for RCC M-25 design mix concrete as in slab supported on wall , landings, beams canopies, deck slabs and shelves etc complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item

M&L for RCC M-25 as in Chajja etc complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item

M&L for 10mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for 6mm to 8mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

All as per item No 14 above but 5 mm to 10 mm dia as in stirrups,spaces & binders complete all as specified.

M & L for brick work with fly ash brick using modular size brick, straight or cured on plan exc 6m mean radius built in CM 1:6 complete as specified.

M&L for moorum/Red bajri filling in floor or paving laid in layers n.exc 15cm thick spread,levelled and rammed including watering complete all as specified.

Returing filling in soil including spreading,levelling watering & well ramming in layers not exc 25cm.

Removing excavated material (soil) to a distance exc 50 m but n exc 500 m and depositing where directed at a level n.exc 1.5m above starting point.

M&L for hardcore with broken stone or boulder of n. exc 63mm, deposited spread and levelled in layers n exc 15mm thick, watered and rammed to true surface complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub-base, floor and foot path etc complete all as specified.

M&L for plain cement concrete 1:2:4 type B0 using 20mm graded stone aggregate as in floor as a leveling course all as specified.

M&L for screed bed or bedding layer 20mm thick for laying floor tiles in cement mortat 1:6, finished even and rough complete all as specified.

S & F coloured Non Skid ceramic tiles 7 to 8mm thick (Square/Rectanguler) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile complete all as specified.

S & F Glazed ceramic (coloured glossy series) digital wall tile of size 300X450mmX7mm on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over including 10mm thick rendering in CM 1:4 all as specified.

M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified.

M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 200ml by weight of cement per bag finished even and smooth without using extra cement complete all as specified. NOTE ; WPC shall be measured and paid separatelyunder relevant item.

Supply only liquid water proofing compound.

M&L for 75 mm thick, PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and paving, finishing concrete surfaces even and smooth without using extra cement complete all as specified.

S&F Powder coating anodised aluminium ventilator ( Louvers type) with louvers glass and glass stay, section weighing 0.55Kg/m including necessary joining cleats, glazing clips for fixing of wiremesh,rubber neoprene packing,anodised aluminium snap beading screws etc.(minimum thickness of powder coating 50micron) complete all as specified and directed.

S&F Solid PVC Door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinfourced with M.S Square tube, as per specification and directed.

S& F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S & F 150 mm long Aluminium handles, cast type, anodised

S&F 100mm size butt hinges,Extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.

S&F PVC Pipes 110mm dia bore single socketed,in any length with rubber ring joints, laid in floors all as specified.

S&F PVC (SWR) bends any radious 110mm dia.

S&F PVC (SWR) 110mm bore junction single,(Single T)equal or unequal all as specified.

S&F 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement

S&F 100X100mm size Salt-glazed stoneware gully trap,square or round mouthed ,type 'P'.

S&F PVC Pipes 75mm bore single socketed,in any length with rubber ring joints,laid in floors

S&F PVC (SWR) 75mm bore bends

S&F PVC(SWR) 75mm bore junction single (Single T) equal or unequal.

S&F GI tubes 15mm dia medium grade with all fitting fixed to walls, ceiling or in floor complete all as specified.

All as per item No 44 but for 20mm bore.

S& F 25mm dia Gunmetal valve globe or gate valves,with iron wheel head,screwed both ends foriron pipe and fixed.

S&F Rotational moulded polythene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) three layered, ISI marked, hoisted and fixed in position complete all as specified.

S& F PTMT nipple 25 mm suitable for HDPE water tank.(Minimum weight 65gms) complete all as specified.

S&F vitreous chiina squatting pan "orissa" pattern of size 630X450mm white colour with integral foot rest (excluding flushing cistern) complete all as specified.

S&F 'P' or 'S' trap for EWC

S&F Vitreous china wash down water closet pan ( Pedestal pattern),white( excluding, flushing cistern and flush pipe) complete all as specified.

S&F 15mm bore chromium plated two way bib tab with flange fancy type,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,scrwed both ends for iron pipe or for unions complete all as specified.

S&F 15mm bore chromium plated health fucet including flexible pipe 1.00 m long wall mounted and brass CP nuts complete all as specified.

S&F PVC valveless syphonic action type flushing cistern of 10 litres capacity low level white, with inlet ball valve, float and handle including brackets all as specified.

S&F Vitreous china urinal half stall white coloured with urinal spreader of CP for fixing with 15mm dia pipe,( Minimum weight 60 Gms) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement, fixing with spreader, flush pipe,grating and union for discharge pipe. complete all as specified.

S&F vitreous china wash hand basin white (oval shaped under counter) of size 550mmX400mm compete all as specified.

S&F 15mm dia swan neck pillar taps fancy type,cast copper alloy,with capstain heads,chromium plated screwed down high pressure,with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly-nuts screwed for iron all as specified.

S&F waste fitting 32mm bore,brass,chromium plated for basins etc with long screwed shanks and fly-nuts.flange and bed deal in red lead cement complete all as specified.

S&F PVC waste pipe for wash hand basin/Urinals

S&F for PVC connection 15mm size with PTMT nuts of length 450mm

S&F granite (of any type) tiles 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

S & F stop cock cast copper alloy with crutch or butterfly handle,fancy type,screwed for iron pipe or for brass ferrule for 15mm bore complete all as specified.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle,fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified.

S&F brass chromium plated tubular towel rail,20mm dia D type 60cm long between flanges.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for preperation of new plastered surfaces of ceiling and applying three coats of white wash all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified.

M&L for applying 1mm thick white cement based wall care putty complete all as specified.

M&L for preparation of new plastered surface of wall,pilasters,cornices etc and applying two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified Make : (a) Asian (Apex ultima).berger weather coat all gaurd.ICI Dulex (Weather sheild Max), Nerolac (Excel total) Make of primer : Asin (X2) or Equivalant Note : (a) Each stages i.e Preparation primer application,First coat and second coat of Apex shall be passed by Engineer-in-Charge (b) Written warrenty for four years shall be submitted by the contractor for this item after completion.

M&L for machine pressed precast concrete interlocking paver block using rubberised moulding any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey and no pigment over 30mm thick dry screened stone dust complete all as specified. NOTE : Stone dust cushioning shall be measured and paid separately under relevant item.

M&L for stone dust under floors or in foundation including watering and considaration spreading and levelling in layers n.exc 25 cm thick all as specified.

M&L for PCC 1:3;6 type C1 (using 20mm graded stone aggrgate) as in mud stops.kerbs etc rounded or chamfered edges complete all as specified.

M&L for PCC 1:2:4 type B2 using 40mm graded aggregate ) as in embedding of angle iron including necessary formwork complete all as specified.

S&F mild steel framed brackets of angle or tees with web and flanges cut to shape,drilled and counter sunk for screw, including bending and welding angle as necessary gusset plates riviting etc n exc 10Kg for each brackets,confirming to Fe-290 Gde-E-165 all as specified.

S&F mild steel screw bolts 11mm to 15mm dia( Machine made)with hexagonal or square head one end screwed and other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or sqaure exc.10cm and not exc 15cm long all as specified and directed

S&F pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenght of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any descripotion over 10cm in width or girth all as specified.

M&L for construction of sockage well including excavation in ordinary soil,foundation in PCC 1:3:6 ,walls of Honey combed and solid in M-25 concrete,including intercepting chamber,screen chamber brick work in CM 1:6, RCC cover slab in M-25 ,RR masonry, filling with brick bats, complete of size 3.0M Dia X3.0M deep complete all as specified and as per TD-DRG NO CEJZ/TD/sheet No 1/1 dated 05/05/2000

M&L for construction of septic tanks, for 100 users including excavation in ordinary soil,foundation in PCC 1:2:4,brick work in CM 1:4 ,Slab covers with RCC, precast manholes cover including 6mm plate embedded all around/Fibre reinforced cover with angle iron frame, Vent shaft and sludge chambers etc. complete all as specified and as per TD-TRG NO CEJZ/TD/57 sheet No 1/4 to 4/4 dated 05/05/2000

M&L for concrete bed to drain pipes of 150mm dia including packing under & haunching against the sides of pipes after they are laid and tested with cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified.

M&L for Reinforced concrete pipes150mm dia class NP2 laid and jointed complete with collar all as specified and directed.

S&F FRC manhole cover with and including rectanglar frame of size 44''X26'' md-10 complete all as specified as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in roof/terrace & parapet, etc, including removing existing roof treatment of any description not exceeding 15cm thickness complete all as specified.

M & L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste/rain pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate and finish the surface as per existing complete all as specified and directed.

M & L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course average thickness 50 mm finished even and fair for laying floor finishes etc complete all as specified.

M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified NOTE : WPC shall be measured and paid separately under respective item.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.

M & L for applying two coats of tack coat of Industrial bitumen of grade 85/25 at the rate of 1.2 Kg per Sqm including cleaning and preparing surfaces complete all as specified. NOTE : Ist coat for boning of material below membrane and 2nd coat on top of membrane. Two coats of tack coat shall be measured as one unit sqm.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced torch application complete all as specified and as per Manufacturer's instructions. NOTE: Application of APP membrane shall be carried out by authorised applicator of Manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on APP Membrane surface as on non assesible area complete all as specified

Disconnecting existing tanks exc 500 and not exc 1000 litres capacity, setting aside (or lowering if required) for, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

E/M portion:

M & L for Point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 5Amps socket out let point controlled by one switch on same board with other switches.

One 5Amps socket out let point controlled by one switch on Independent board with other switches.

M & L for Point wiring with FR LS PVC insulated and unsheathed electric cable 1100 volts grade single core two run having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area for phase & neutral, drawn in and including non metallic rigid PVC conduit not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green FR LS PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including galvanised/wooden boxes of suitable size with white laminated bakelite sheet for mounting switches,sockets etc complete for the followings.

One light point/fan point controlled by one switch

All as per item No-here in before but using FRLS PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FRLS PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp 240 volt.

S&F socket outlet flush type 5 pin, 6 Amps, 230 volts

S&F switch piano flush button single pole one way 15 Amp 240 volt

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts

S&F ceiling rose surface bakelite three terminal

Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable and fixed on two nos of PVC square boxes complete all as specified Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro

Supply and fix integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable and fixed on two nos of PVC square box complete all as specified and Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro

Supply and fix LED street light fittings 1x25 /30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified .Make:- Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. ENXTP30LWHSYPCSD and equivalent in Havells .

Supply and fix double door SPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified.

Supply and fix double door SPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified .

S & F MCB SPN 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified.

M & L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.

Supply and fix Exhaust fan 200mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified. Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton

Supply and laying LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

Supply laying and jointing GI pipe 'light grade' 40 mm bore in trenches/under floors or roads/ along poles/ on wall including clamps for protection of cables complete all as specified and directed.

M & L for clean and dry sand (un-washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified .Note:Thickness of sand shall be measured after punning

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified

Supply, fixing, laying & jointing galvanised iron water tubes 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors etc. and testing complete all as specified and directed of 25 mm bore dia

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered,ISI marked,hoisted and fixed in position of capacity 2000 litres capacity all as specified in SSR Part -I.

Supply and fixed Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 25mm bore dia of pipe ( Minimum weight 20 mm-210 gms)

M&L for drilling and tapping cast iron mains in position for branch connections of the internal dia 20mm bore complete all as specified and directed.

M & L Cast iron pipes 80mm bore with spigot and socket ends centrifugally cast, class LA, in length laid in trenches complete all as specified.

M&L for cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collars, caps and plug upto 150 mm bore for spigot and socket end pipes complete all as specified and directed.

M&L for run lead joints for spigot and socket joints of 80 mm bore all as specified

Supply & fix Sluice valve of 80mm bore cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with raising spindle of Stainless steel and operating handle, including rubber gaskets, nuts, bolts, washers etc complete all as specified

M/S UnitedConstruction