SPECIAL REPAIR OF ROAD BERM SHOULDER FOR IMPROVEMENT NEAR MES COLONY BSO MCTE AND T 5 AND T 6 IN OLD BLOCK AREA UNDER GE AWC MHOW

Excavation over areas n. exc 1.5m deep & getting out in all type of soil/sdr complete all as specified and directed.

M&L Moorum / red bajri filling floors or pavings with laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

Removing excavated soil/sdr to a distance exc 250m but not exc 500m and depositing where directed complete all as specified and directed.

M&L for Plain Cement concrete Type - D-2 (1:4:8) (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.

M & L for plain cement concrete Type C-1(1:3:6) (using 20 mm graded stone aggregate), cills, steps, parapets , copings,bond stone, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.