Covering of cable trenches and misc. repairing work at Chhinda Sub Station under RWA-CDA Sub Area.

Amount

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : etc., and stacking the material within 50 metres lead of

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). specified grade excluding the cost

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet

Brick work with non modular fly ash bricks conforming to Cement mortar 1:6 (1 cement : 6 Coarse sand) IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in Kiln seasoned and chemically treated hollock wood panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and laying in position specified grade of reinforced 1:2:4 (1 cement : 2 coarse sand including manufactured sand derived from Recycled concrete aggregate (RCA) upto 20% : 4 graded stone aggregate 20 mm nominal size of Recycled concrete aggregate (RCA) upto 20%). cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Centering and shuttering including strutting, propping etc.Suspended floors, roofs, landings, balconies and access platform and removal of form for

White washing with lime to give an even shade :Old work (one or more coats)

Providing and fixing AC Sheet 6mm thick sheet roofing and fixing with GI J or L hooks bolts nuts 8mm dia etc coplete as per instruction E/I

Clearing of grass and removal of the rubbish up to a distance of 50 m outisde a speriphery of the Area cleared.

Painting with Synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Total impact of GST for the purpose of CTC

MOHAN BATRI

arun civil contrator