Constt. of Tourism hutt near Tube well lolag wno 5

Amount

Earthwork in Excavation in trenches in all kind of soil:

P/L Cement Concrete in 1:5:10 mix with 40mm nominal size stone agg:

P/L Cement Concrete in 1:3:6 mix with 20mm nominal size stone agg. With 20% Boulders:

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

12mm thick cement plaster 1:4 mix

Provding and filling Riverbed material incld. Watering ramming complete.

Formwork to the sides of foundation and plinth

Structural steel work in welded butt upsection using square/Rect./round hollow M.S.tube including painting with primary coat

Providing and laying vitierified tiles (600*600mm) over a bed of 20mm thick cement sand mortar incld. Filling joint with white cement mixed with matching pigments

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing and fixing steel benches made of M.S hallow section pipe,cast iron ornamental arms incld. Painting & carriage (All work as per instruction of engineer incharge)

Add cost of sign board

GLOBAL ENGINEERS

M/S RAKESH KUMAR GOVT CONTRACTOR